Analog giriş kartı XI/ON ECO, 24 V DC, 8AI(gerilim, akım)/4(PT, ni, R) XI/ON standart I/O sistemi, XI/ON I/O sistemine maliyet ve alan açısından optimize edilmiş I/O modülleri ve ağ geçitleri ekler. ECO modülleri temel modüllere ihtiyaç duymaz ve standart XI/ON sistemiyle tamamen uyumludur. Yüksek kanal yoğunluğu (13 mm'de 16 DI/DO'ya kadar), itmeli yaylı terminaller, modül başına 8 veya 16 kanal. ECO ağ geçitleri CANopen veri yolu sistemleri Profibus DP ve Ethernet'i destekler.
Analog giriş kartı XI/ON ECO, 24 V DC, 8AI(gerilim, akım)/4(PT, ni, R)
XI/ON standart I/O sistemi, XI/ON I/O sistemine maliyet ve alan açısından optimize edilmiş I/O modülleri ve ağ geçitleri ekler. ECO modülleri temel modüllere ihtiyaç duymaz ve standart XI/ON sistemiyle tamamen uyumludur. Yüksek kanal yoğunluğu (13 mm'de 16 DI/DO'ya kadar), itmeli yaylı terminaller, modül başına 8 veya 16 kanal. ECO ağ geçitleri CANopen veri yolu sistemleri Profibus DP ve Ethernet'i destekler.
| Function | XI/ON I/O modules |
| Function | XNE Slice module |
| Short Description | 8 Analog input U/I or 4 Analog inputs PT/NI -10/0 to +10 V DC 0/4 to 20 mA Acquisition of normalized signals for temperature measurement Connection of sensor types Pt100, Pt200, Pt500, Pt1000 and Ni100, Ni1000, NI1000TK5000 in 2- or 3-wire circuit |
| Standards | |
| Potential isolation | EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
| Ambient temperature >Ambient temperature, operation |
Yes, through optocoupler |
| Ambient temperature >Storage, transport [ϑ] |
0 - +55 °C |
| Relative humidity >Relative humidity |
-25 - +85 °C |
| Ambient conditions, mechanical >Degree of Protection |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
| Ambient conditions, mechanical >Harmful gases |
IP20 |
| Vibration resistance, operating conditions | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
| Mechanical shock resistance | according to IEC/EN 60068-2-6 |
| Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC 60068-2-27 g |
| Drop and topple | According to IEC 60068-2-29 |
| Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
EN 61000-4-2 kV |
| Electromagnetic compatibility (EMC) >Burst |
EN 61100-4-2 V/m |
| Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-4 |
| Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-5 |
| Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-6 V |
| Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 55016-2-3 dB |
| Electromagnetic compatibility (EMC) >Type test |
EN 61131-2 |
| Approvals | to EN 61131-2 |
| Other technical data (sheet catalogue) | CE, cULus EAC |
| Rated data | Technical Data |
| Connection design in TOP direction | |
| Stripping length | according to VDE 0611 Part 1/8.92 / IEC/EN 60947-7-1 |
| Clamping range | Push-In spring-cage terminals |
| Connectable conductors >"e" solid H07V-U |
8 mm |
| Connectable conductors >"f" flexible H 07V-K |
max. 0.14 - 1.5 mm2 |
| Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
| Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
| Connectable conductors >"e" solid H07V-U |
0.25 - 1.5 mm2 |
| Connectable conductors >"f" flexible H 07V-K |
0.25 - 0.75 mm2 |
| Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
| Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
| Gauge pin IEC/EN 60947-1 | 0.25 - 1.5 mm2 |
| Measured variables | 0.25 - 0.75 mm2 |
| Channels | A1 |
| Rated voltage through supply terminal [UL ] | |
| Rated current consumption from supply terminal [IL ] | Voltage, current, temperature (PT, NI), resistance R |
| Rated current consumption from module bus [IMB ] | 8 (U/I), 4 (PT/NI/R) Number |
| Heat dissipation | 24 V DC |
| Input current | 35 mA |
| Maximum input current | ≦ 30 mA |
| Input voltage | < 1.5 W |
| Maximum input voltage | 0/4 - 20 mA |
| Input impedance | 40 (Max. input voltage: < 17 V) mA |
| Limit frequency (-3 db) | -10/0 to +10 V DC |
| Offset error | ± 20 V DC |
| Basic error limit at 23 °C | < 62 Ω/≧ 200 kΩ |
| Temperature coefficient | 1.5 Hz |
| Measured value representation | 0.1 % |
| Connectable sensors | 0.2 % |
| Temperature range | 200 ppm/°C of full-scale value |
| Diagnostics | 16-bit signed integer 12-bit full range, flush left Standard/extended range/PA (NE43) |
| Base modules >without C connection |
Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751) Nickel sensors: Ni100, Ni1000 (as per DIN 43760) |
| Measured variables | Pt: -200 - +850 (-328 - +1562)/-200 - +150 (-328 - +302) Ni: -60 - +250 (-76 - +482)/-60 - +150 (-76 - +302) °C, (°F) |
| Channels | Yes |
| Rated voltage through supply terminal [UL ] | Already built in |
| Rated current consumption from supply terminal [IL ] | |
| Rated current consumption from module bus [IMB ] | Voltage, current, temperature (PT, NI), resistance R |
| Heat dissipation | 8 (U/I), 4 (PT/NI/R) Number |
| Offset error | 24 V DC |
| Basic error limit at 23 °C | 35 mA |
| Temperature coefficient | ≦ 30 mA |
| Measured value representation | < 1.5 W |
| Base modules >without C connection |
0.1 % |
| Channels | 0.2 % |
| Rated voltage through supply terminal [UL ] | 200 ppm/°C of full-scale value |
| Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | 16-bit signed integer 12-bit full range, flush left Standard/extended range/PA (NE43) |
| Rated current consumption from module bus [IMB ] | Already built in |
| Can be connected | |
| Diagnostics | 8 (U/I), 4 (PT/NI/R) Number |
| Channels | 24 V DC |
| Rated voltage through supply terminal [UL ] | 35 mA |
| Rated current consumption from supply terminal [IL ] | ≦ 30 mA |
| Rated current consumption from module bus [IMB ] | Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751) Nickel sensors: Ni100, Ni1000 (as per DIN 43760) |
| Heat dissipation | Yes |
| Base modules >without C connection |
|
| Rated voltage through supply terminal [UL ] | 8 (U/I), 4 (PT/NI/R) Number |
| Rated current consumption from supply terminal [IL ] | 24 V DC |
| Rated current consumption from module bus [IMB ] | 35 mA |
| Can be connected | ≦ 30 mA |
| Base modules >without C connection |
< 1.5 W |
| Rated voltage through supply terminal [UL ] | Already built in |
| Rated current consumption from supply terminal [IL ] | |
| Rated current consumption from module bus [IMB ] | 24 V DC |
| Channels | 35 mA |
| Rated voltage through supply terminal [UL ] | ≦ 30 mA |
| Rated current consumption from supply terminal [IL ] | Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751) Nickel sensors: Ni100, Ni1000 (as per DIN 43760) |
| Rated current consumption from module bus [IMB ] | Already built in |
| Heat dissipation | |
| Temperature coefficient | 24 V DC |
| Rated voltage through supply terminal [UL ] | 35 mA |
| Rated current consumption from supply terminal [IL ] | ≦ 30 mA |
| Rated current consumption from module bus [IMB ] | |
| Rated operational current for specified heat dissipation [In] | 8 (U/I), 4 (PT/NI/R) Number |
| Heat dissipation per pole, current-dependent [Pvid] | 24 V DC |
| Equipment heat dissipation, current-dependent [Pvid] | 35 mA |
| Static heat dissipation, non-current-dependent [Pvs] | ≦ 30 mA |
| Heat dissipation capacity [Pdiss] | < 1.5 W |
| Operating ambient temperature min. | |
| Operating ambient temperature max. | 200 ppm/°C of full-scale value |
| Degree of Protection | |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
24 V DC |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
35 mA |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
≦ 30 mA |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 A |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
1.5 W |
| 10.3 Degree of protection of ASSEMBLIES | 0 W |
| 10.4 Clearances and creepage distances | 0 °C |
| 10.5 Protection against electric shock | +55 °C |
| 10.6 Incorporation of switching devices and components | IP20 |
| 10.7 Internal electrical circuits and connections | |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Meets the product standard´s requirements. |
| Supply voltage AC 50 Hz | Meets the product standard´s requirements. |
| Supply voltage AC 60 Hz | Meets the product standard´s requirements. |
| Supply voltage DC | Does not apply, since the entire switchgear needs to be evaluated. |
| Voltage type of supply voltage | Does not apply, since the entire switchgear needs to be evaluated. |
| Input, current | Is the panel builder´s responsibility. |
| Input, voltage | Is the panel builder´s responsibility. |
| Input, resistor | Is the panel builder´s responsibility. |
| Input, resistance thermometer | Is the panel builder´s responsibility. |
| Input, thermocouple | Is the panel builder´s responsibility. |
| Input signal, configurable | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Resolution of the analogue inputs | Is the panel builder´s responsibility. |
| Output, current | Is the panel builder´s responsibility. |
| Output, voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Output signal configurable | |
| Resolution of the analogue outputs | |
| Number of analogue inputs | 0 - 0 V |
| Number of analogue outputs | 0 - 0 V |
| Analogue inputs configurable | 20.4 - 28.8 V |
| Analogue outputs configurable | DC |
| Number of HW-interfaces industrial Ethernet | Yes |
| Number of interfaces PROFINET | Yes |
| Number of HW-interfaces RS-232 | Yes |
| Number of HW-interfaces RS-422 | No |
| Number of HW-interfaces RS-485 | No |
| Number of HW-interfaces serial TTY | Yes |
| Number of HW-interfaces parallel | 16 Bit |
| Number of HW-interfaces Wireless | No |
| Number of HW-interfaces USB | No |
| Number of HW-interfaces other | No |
| Supporting protocol for TCP/IP | 0 Bit |
| Supporting protocol for PROFIBUS | 8 |
| Supporting protocol for CAN | 0 |
| Supporting protocol for INTERBUS | Yes |
| Supporting protocol for ASI | Yes |
| Supporting protocol for KNX | 0 |
| Supporting protocol for MODBUS | 0 |
| Supporting protocol for Data-Highway | 0 |
| Supporting protocol for DeviceNet | 0 |
| Supporting protocol for SUCONET | 0 |
| Supporting protocol for LON | 0 |
| Supporting protocol for PROFINET IO | 0 |
| Supporting protocol for PROFINET CBA | 0 |
| Supporting protocol for SERCOS | 0 |
| Supporting protocol for Foundation Fieldbus | 1 |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| IO link master | No |
| System accessory | No |
| Degree of protection (IP) | No |
| Degree of protection (NEMA) | No |
| Type of electric connection | No |
| Fieldbus connection over separate bus coupler possible | No |
| Rail mounting possible | No |
| Wall mounting/direct mounting | No |
| Front build in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| Category according to EN 954-1 | No |
| SIL according to IEC 61508 | No |
| Performance level acc. EN ISO 13849-1 | No |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | Yes |
| Explosion safety category for dust | IP20 |
| Width | |
| Height | Screw-/spring clamp connection |
| Depth | Yes |
| Product Standards | Yes |
| North America Certification | No |
| Specially designed for North America | No |
| Current Limiting Circuit-Breaker | No |
| Degree of Protection | No |
| Link to sheet catalogue |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
