EC4P-221-MRXD1
106393 EC4P-221-MRXD1
106393

Kompakt PLC, 24 V DC, 12DI(4AI'nin), 6DO(R), CAN, ekran
Küçük ve orta ölçekli otomasyon görevleri için kompakt kontrolör, IEC 61131'e (CoDeSys) göre programlama, Ethernet arayüzü ve seri arayüz (ec4p-222 türleri) programlama amaçlıdır, UDP ve Modbus aracılığıyla iletişim ve bağlantı OPC istemcilerinin

Description	Expandable: Inputs/outputs and bus systems individual laser inscription possible with EC4-COMBINATION-*
Digital	easyNet/CANopen® on board
of which can be used as analog
Relay 10 A (UL)	12
Display & keypad	4
Supply voltage
Dimensions (W x H x D)	6
Weight
Mounting	✓
Solid	24 V DC
Flexible with ferrule
Standard screwdriver	107.5 x 90 x 72 without/79 with adapter for MCC (6 SU) mm
Max. tightening torque	0.3 kg
Operating ambient temperature	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using 3 fixing brackets ZB4-101-GF1 (accessories)
Condensation
LCD display (clearly legible)	0.2/4 (AWG 22 - 12) mm2
Storage [ϑ]	0.2/2.5 (AWG 22 - 12) mm2
Relative humidity, non-condensing (IEC/EN 60068-2-30)	0.8 x 3.5 mm
Air pressure (operation)	0.6 Nm
Protection type (IEC/EN 60529, EN50178, VBG 4)
Vibrations (IEC/EN 60068-2-6) >Constant amplitude 0.15 mm	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations (IEC/EN 60068-2-6) >Constant acceleration 2 g	Take appropriate measures to prevent condensation
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	0 - 55 °C
Drop to IEC/EN 60068-2-31 [Drop height]	-40 - +70 °C
Free fall, packaged (IEC/EN 60068-2-32)	5 - 95 %
Mounting position	1080 - 1080 hPa
Overvoltage category/pollution degree
Electrostatic discharge (ESD) >applied standard	IP20
Electrostatic discharge (ESD) >Air discharge	10 - 57 Hz
Electrostatic discharge (ESD) >Contact discharge	57 - 150 Hz
Electromagnetic fields (RFI) to IEC EN 61000-4-3	18 Impacts
Radio interference suppression	50 mm
Burst	1 m
Burst >Supply cable	Vertical or horizontal
Burst >Signal lines
power pulses (Surge)	II/2
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	IEC EN 61000-4-2, Level 3
Clearance in air and creepage distances	8 kV
Insulation resistance	6 kV
Back-up of real-time clock	10 V/m
Accuracy of the real-time clock	EN 55011 Class B, EN 55022 Class B
Write cycles of the retentive memory	IEC/EN 61000-4-4, level 3 kV
Rated operational voltage [Ue]	2 kV
Permissible range [Ue]	2 kV
Residual ripple	2 kV (supply cables, symmetrical, EASY...AC) 0.5 kV (supply cables, symmetrical, easy-DC) according to IEC/EN 61000-4-5
Input current	10 V
Voltage dips
Heat dissipation [P]	EN 50178, UL 508, CSA C22.2, No. 142
Processor	EN 50178
Memory >Program code/data
Memory >Marker/retentive data
Cycle time for 1 k of instructions (Bit, Byte)	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
PRG interface RS232 >Data transfer rate	part no. ± 5 (± 0.5 h⁄Year) s/day
PRG interface RS232 >Connection types
PRG interface RS232 >Potential isolation	10000000000 (10¹⁰) (Read-write cycles)
PRG interface RS232 >Master mode >Data transfer rate
PRG interface RS232 >Master mode >Character formats	24 DC (-15/+20%) V
PRG interface RS232 >Master mode >Number of transmission bytes in a block	20.4 - 28.8 V DC
PRG interface RS232 >Master mode >Number of received bytes in a block	≦ 5 %
Ethernet >Data transfer rate	normally 140 mA at Ue
Ethernet >Connection types	≤ 10 (IEC/EN 61131-2) ms
Ethernet >Potential isolation	Normally 3.4 W
CANopen® >Data transfer rate
CANopen® >Bus termination (first and last station)	Infineon XC161
CANopen® >Connection types	256/14 segments of 16 KB each kByte
Master mode >Number	16/4/4/8 KByte
Mode slave >Stations	< 0.3 ms
Mode slave >PDO type
Mode slave >Control contact rated current	4.8, 9.6, 19.2, 38.4, 57.6, 115.2 (character format: 8 bit data, no parity, 1 stop bit) kBit/s
Number	RJ45-bus
Inputs can be used as analog inputs	none
Status Display	0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6 kbit/s
Potential isolation	8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Rated operational voltage [Ue]	190 bytes
Input voltage	190 bytes
Input current on 1 signal >Input current at signal 1	10 MBit/s, 100 m Mbit/s
Deceleration time	RJ45
Cable length	No
Incremental counter >Number of counter inputs	500 kBit/s, 25 m 250 kBit/s, 60m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Incremental counter >Value range	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
Incremental counter >Counter frequency	2 x RJ45, 8 pole
Incremental counter >Pulse shape	8
Incremental counter >Counter inputs	max. 126 Number
Incremental counter >Reference input	Asynchronous, cyclic, acyclic
Incremental counter >Input for reference switch	To DS 301 V4
Incremental counter >Counter inputs I1 and I2, I3 and I4
Incremental counter >Signal offset	12
Rapid counter inputs >Number	4 (I7, I8, I11, I12)
Rapid counter inputs >Value range	LCD-Display
Rapid counter inputs >Cable length	from the outputs: yes to network easyNet, easyLink
Rapid counter inputs >Counter frequency	24 V DC
Rapid counter inputs >Pulse shape	< 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0" > 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1" V DC
Number	3.3 (I1 to I6) 2.2 (I7, I8) 3.3 (I9, I10) 2.2 (I11, I12) mA
Potential isolation	normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") ms
Input type	100 (unshielded) m
Signal range	1 (I1, I2, I3, I4)
Resolution	32 Bit
Input impedance	≦ 40 kHz
Accuracy of actual value >Within a single device	Square
Conversion time, analog/digital	I1, I2
Input current	I3
Cable length	I4
Outputs in groups of	1
Parallel switching of outputs for increased output	90°
Protection of an output relay	2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Potential isolation	16/32 Bit
Lifespan, mechanical [Operations]	≦ 20 (screened) m
Contacts >Conventional thermal current (10 A UL)	≦ 50 kHz
Contacts >Recommended for load: 12 V AC/DC	Square
Contacts >Short-circuit-proof cos ϕ = 1, characteristic B16 at 600 A
Contacts >Short-circuit-proof cos ϕ = 0.5 to 0.7, characteristic B16 at 900 A	4 (I7, I8, I11, I12)
Contacts >Rated impulse withstand voltage Uimp of contact coil	from the outputs: yes to interface/memory card: no
Contacts >Rated operational voltage [Ue]	DC voltage
Rated insulation voltage [Ui]	0-10 V DC
Safe isolation according to EN 50178	0.01 V analog 0.01 V digital 10 Bit (value 0 - 1023)
Making capacity >AC–-15, 250 V AC, 3 A (600 ops./h) [Operations]	11.2 kΩ
Making capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	± 2, (I7, I8, I11, I12) ± 0.12 V %
Breaking capacity >AC-15, 250 V AC, 3 A (600 Ops./h) [Operations]	each CPU cycle ms
Breaking capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	< 1 mA
Filament bulb load >1000 W at 230/240 V AC [Operations]	≦ 30, screened m
Filament bulb load >500 W at 115/120 V AC [Operations]
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >With upstream electrical device [Operations]	1
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >Uncompensated [Operations]	Not permissible
Fluorescent lamp load >Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations]	Miniature circuit-breaker B16 or fuse 8 A (slow)
Switching frequency >Mechanical operations	from power supply: yes From the inputs: yes in groups Safe isolation according to EN 50178: 300 V AC Basic isolation: 600 V AC
Switching frequency >Switching frequency	10 x 106
Switching frequency >Resistive load/lamp load	8 A
Switching frequency >Inductive load	> 500 mA
UL/CSA >Uninterrupted current at 240 V AC	16 A
UL/CSA >Uninterrupted current at 24 V DC	16 A
UL/CSA >AC >Control Circuit Rating Codes (utilization category)	6 kV
UL/CSA >AC >Max. rated operational voltage	250 V AC
UL/CSA >AC >max. thermal continuous current cos ϕ = 1 at B 300	250 V AC
UL/CSA >AC >max. make/break cos ϕ ≠ capacity 1 at B 300	300 between coil and contact 300 between two contacts V AC
UL/CSA >DC >Control Circuit Rating Codes (utilization category)	300000
UL/CSA >DC >Max. rated operational voltage	200000
UL/CSA >DC >Max. thermal uninterrupted current at R 300	300000
UL/CSA >DC >Max. make/break capacity at R 300	200000
Bus termination (first and last station)	25000
Rated operational current for specified heat dissipation [In]	25000
Heat dissipation per pole, current-dependent [Pvid]	25000
Equipment heat dissipation, current-dependent [Pvid]	25000
Static heat dissipation, non-current-dependent [Pvs]	25000
Heat dissipation capacity [Pdiss]	10 x 106
Operating ambient temperature min.	10 Hz
Operating ambient temperature max.	2 Hz
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0.5 Hz
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	10 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	8 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	B 300 Light Pilot Duty
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	300 V AC
10.2 Strength of materials and parts >10.2.5 Lifting	5 A
10.2 Strength of materials and parts >10.2.6 Mechanical impact	3600/360 VA
10.2 Strength of materials and parts >10.2.7 Inscriptions	R 300 Light Pilot Duty
10.3 Degree of protection of ASSEMBLIES	300 V DC
10.4 Clearances and creepage distances	1 A
10.5 Protection against electric shock	28/28 VA
10.6 Incorporation of switching devices and components
10.7 Internal electrical circuits and connections	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
10.8 Connections for external conductors
10.9 Insulation properties >10.9.2 Power-frequency electric strength	0 A
10.9 Insulation properties >10.9.3 Impulse withstand voltage	0 W
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	0 W
10.10 Temperature rise	3.4 W
10.11 Short-circuit rating	0 W
10.12 Electromagnetic compatibility	-25 °C
10.13 Mechanical function	+55 °C
Contains function building blocks
Contains basic device	Meets the product standard´s requirements.
Contains module rack	Meets the product standard´s requirements.
Contains power supply	Meets the product standard´s requirements.
Contains analogue input module	Meets the product standard´s requirements.
Contains analogue output module	Meets the product standard´s requirements.
Contains digital input module	Does not apply, since the entire switchgear needs to be evaluated.
Contains digital output module	Does not apply, since the entire switchgear needs to be evaluated.
Contains function module	Meets the product standard´s requirements.
Contains technology module	Meets the product standard´s requirements.
Contains communication module	Meets the product standard´s requirements.
Contains memory unit	Does not apply, since the entire switchgear needs to be evaluated.
Contains simulation module	Does not apply, since the entire switchgear needs to be evaluated.
Contains connection cable	Is the panel builder´s responsibility.
Contains control unit	Is the panel builder´s responsibility.
Contains monitor	Is the panel builder´s responsibility.
Contains programming software	Is the panel builder´s responsibility.
Contains engineering software	Is the panel builder´s responsibility.
Contains visualization	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Contains libraries	Is the panel builder´s responsibility.
Contains documentation	Is the panel builder´s responsibility.
Contains other components	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Software preinstalled
Product Standards
UL File No.	Yes
UL Category Control No.	Yes
CSA File No.	No
CSA Class No.	Yes
North America Certification	Yes
Specially designed for North America	No
Current Limiting Circuit-Breaker	Yes
Degree of Protection	Yes

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.