EC4P-221-MRXX1
106394 EC4P-221-MRXX1
106394

Kompakt PLC, 24 V DC, 12DI(4AI'nin), 6 DO(R), CAN
Küçük ve orta ölçekli otomasyon görevleri için kompakt kontrolör, IEC 61131'e (CoDeSys) göre programlama, Ethernet arayüzü ve seri arayüz (ec4p-222 tipleri) programlama, UDP ve Modbus aracılığıyla iletişim ve bağlantı amaçlıdır OPC istemcilerinin

Description	Expandable: Inputs/outputs and bus systems individual laser inscription possible with EC4-COMBINATION-*
Digital	easyNet/CANopen® on board
of which can be used as analog
Relay 10 A (UL)	12
Supply voltage	4
Dimensions (W x H x D)
Weight	6
Mounting	24 V DC
Solid
Flexible with ferrule	107.5 x 90 x 72 without/79 with adapter for MCC (6 SU) mm
Standard screwdriver	0.3 kg
Max. tightening torque	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using 3 fixing brackets ZB4-101-GF1 (accessories)
Operating ambient temperature
Condensation	0.2/4 (AWG 22 - 12) mm2
LCD display (clearly legible)	0.2/2.5 (AWG 22 - 12) mm2
Storage [ϑ]	0.8 x 3.5 mm
Relative humidity, non-condensing (IEC/EN 60068-2-30)	0.6 Nm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4)	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations (IEC/EN 60068-2-6) >Constant amplitude 0.15 mm	Take appropriate measures to prevent condensation
Vibrations (IEC/EN 60068-2-6) >Constant acceleration 2 g	0 - 55 °C
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	-40 - +70 °C
Drop to IEC/EN 60068-2-31 [Drop height]	5 - 95 %
Free fall, packaged (IEC/EN 60068-2-32)	1080 - 1080 hPa
Mounting position
Overvoltage category/pollution degree	IP20
Electrostatic discharge (ESD) >applied standard	10 - 57 Hz
Electrostatic discharge (ESD) >Air discharge	57 - 150 Hz
Electrostatic discharge (ESD) >Contact discharge	18 Impacts
Electromagnetic fields (RFI) to IEC EN 61000-4-3	50 mm
Radio interference suppression	1 m
Burst	Vertical or horizontal
Burst >Supply cable
Burst >Signal lines	II/2
power pulses (Surge)	IEC EN 61000-4-2, Level 3
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	8 kV
Clearance in air and creepage distances	6 kV
Insulation resistance	10 V/m
Back-up of real-time clock	EN 55011 Class B, EN 55022 Class B
Accuracy of the real-time clock	IEC/EN 61000-4-4, level 3 kV
Write cycles of the retentive memory	2 kV
Rated operational voltage [Ue]	2 kV
Permissible range [Ue]	2 kV (supply cables, symmetrical, EASY...AC) 0.5 kV (supply cables, symmetrical, easy-DC) according to IEC/EN 61000-4-5
Residual ripple	10 V
Input current
Voltage dips	EN 50178, UL 508, CSA C22.2, No. 142
Heat dissipation [P]	EN 50178
Processor
Memory >Program code/data
Memory >Marker/retentive data	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
Cycle time for 1 k of instructions (Bit, Byte)	part no. ± 5 (± 0.5 h⁄Year) s/day
PRG interface RS232 >Data transfer rate
PRG interface RS232 >Connection types	10000000000 (10¹⁰) (Read-write cycles)
PRG interface RS232 >Potential isolation
PRG interface RS232 >Master mode >Data transfer rate	24 DC (-15/+20%) V
PRG interface RS232 >Master mode >Character formats	20.4 - 28.8 V DC
PRG interface RS232 >Master mode >Number of transmission bytes in a block	≦ 5 %
PRG interface RS232 >Master mode >Number of received bytes in a block	normally 140 mA at Ue
Ethernet >Data transfer rate	≤ 10 (IEC/EN 61131-2) ms
Ethernet >Connection types	Normally 3.4 W
Ethernet >Potential isolation
CANopen® >Data transfer rate	Infineon XC161
CANopen® >Bus termination (first and last station)	256/14 segments of 16 KB each kByte
CANopen® >Connection types	16/4/4/8 KByte
Master mode >Number	< 0.3 ms
Mode slave >Stations
Mode slave >PDO type	4.8, 9.6, 19.2, 38.4, 57.6, 115.2 (character format: 8 bit data, no parity, 1 stop bit) kBit/s
Mode slave >Control contact rated current	RJ45-bus
Number	none
Inputs can be used as analog inputs	0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6 kbit/s
Status Display	8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Potential isolation	190 bytes
Rated operational voltage [Ue]	190 bytes
Input voltage	10 MBit/s, 100 m Mbit/s
Input current on 1 signal >Input current at signal 1	RJ45
Deceleration time	No
Cable length	500 kBit/s, 25 m 250 kBit/s, 60m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Incremental counter >Number of counter inputs	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
Incremental counter >Value range	2 x RJ45, 8 pole
Incremental counter >Counter frequency	8
Incremental counter >Pulse shape	max. 126 Number
Incremental counter >Counter inputs	Asynchronous, cyclic, acyclic
Incremental counter >Reference input	To DS 301 V4
Incremental counter >Input for reference switch
Incremental counter >Counter inputs I1 and I2, I3 and I4	12
Incremental counter >Signal offset	4 (I7, I8, I11, I12)
Rapid counter inputs >Number	LCD-Display
Rapid counter inputs >Value range	from the outputs: yes to network easyNet, easyLink
Rapid counter inputs >Cable length	24 V DC
Rapid counter inputs >Counter frequency	< 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0" > 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1" V DC
Rapid counter inputs >Pulse shape	3.3 (I1 to I6) 2.2 (I7, I8) 3.3 (I9, I10) 2.2 (I11, I12) mA
Number	normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") ms
Potential isolation	100 (unshielded) m
Input type	1 (I1, I2, I3, I4)
Signal range	32 Bit
Resolution	≦ 40 kHz
Input impedance	Square
Accuracy of actual value >Within a single device	I1, I2
Conversion time, analog/digital	I3
Input current	I4
Cable length	1
Outputs in groups of	90°
Parallel switching of outputs for increased output	2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Protection of an output relay	16/32 Bit
Potential isolation	≦ 20 (screened) m
Lifespan, mechanical [Operations]	≦ 50 kHz
Contacts >Conventional thermal current (10 A UL)	Square
Contacts >Recommended for load: 12 V AC/DC
Contacts >Short-circuit-proof cos ϕ = 1, characteristic B16 at 600 A	4 (I7, I8, I11, I12)
Contacts >Short-circuit-proof cos ϕ = 0.5 to 0.7, characteristic B16 at 900 A	from the outputs: yes to interface/memory card: no
Contacts >Rated impulse withstand voltage Uimp of contact coil	DC voltage
Contacts >Rated operational voltage [Ue]	0-10 V DC
Rated insulation voltage [Ui]	0.01 V analog 0.01 V digital 10 Bit (value 0 - 1023)
Safe isolation according to EN 50178	11.2 kΩ
Making capacity >AC–-15, 250 V AC, 3 A (600 ops./h) [Operations]	± 2, (I7, I8, I11, I12) ± 0.12 V %
Making capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	each CPU cycle ms
Breaking capacity >AC-15, 250 V AC, 3 A (600 Ops./h) [Operations]	< 1 mA
Breaking capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	≦ 30, screened m
Filament bulb load >1000 W at 230/240 V AC [Operations]
Filament bulb load >500 W at 115/120 V AC [Operations]	1
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >With upstream electrical device [Operations]	Not permissible
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >Uncompensated [Operations]	Miniature circuit-breaker B16 or fuse 8 A (slow)
Fluorescent lamp load >Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations]	from power supply: yes From the inputs: yes in groups Safe isolation according to EN 50178: 300 V AC Basic isolation: 600 V AC
Switching frequency >Mechanical operations	10 x 106
Switching frequency >Switching frequency	8 A
Switching frequency >Resistive load/lamp load	> 500 mA
Switching frequency >Inductive load	16 A
UL/CSA >Uninterrupted current at 240 V AC	16 A
UL/CSA >Uninterrupted current at 24 V DC	6 kV
UL/CSA >AC >Control Circuit Rating Codes (utilization category)	250 V AC
UL/CSA >AC >Max. rated operational voltage	250 V AC
UL/CSA >AC >max. thermal continuous current cos ϕ = 1 at B 300	300 between coil and contact 300 between two contacts V AC
UL/CSA >AC >max. make/break cos ϕ ≠ capacity 1 at B 300	300000
UL/CSA >DC >Control Circuit Rating Codes (utilization category)	200000
UL/CSA >DC >Max. rated operational voltage	300000
UL/CSA >DC >Max. thermal uninterrupted current at R 300	200000
UL/CSA >DC >Max. make/break capacity at R 300	25000
Bus termination (first and last station)	25000
Rated operational current for specified heat dissipation [In]	25000
Heat dissipation per pole, current-dependent [Pvid]	25000
Equipment heat dissipation, current-dependent [Pvid]	25000
Static heat dissipation, non-current-dependent [Pvs]	10 x 106
Heat dissipation capacity [Pdiss]	10 Hz
Operating ambient temperature min.	2 Hz
Operating ambient temperature max.	0.5 Hz
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	10 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	8 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	B 300 Light Pilot Duty
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	300 V AC
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	5 A
10.2 Strength of materials and parts >10.2.5 Lifting	3600/360 VA
10.2 Strength of materials and parts >10.2.6 Mechanical impact	R 300 Light Pilot Duty
10.2 Strength of materials and parts >10.2.7 Inscriptions	300 V DC
10.3 Degree of protection of ASSEMBLIES	1 A
10.4 Clearances and creepage distances	28/28 VA
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	0 A
10.9 Insulation properties >10.9.2 Power-frequency electric strength	0 W
10.9 Insulation properties >10.9.3 Impulse withstand voltage	0 W
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	3.4 W
10.10 Temperature rise	0 W
10.11 Short-circuit rating	-25 °C
10.12 Electromagnetic compatibility	+55 °C
10.13 Mechanical function
Contains function building blocks	Meets the product standard´s requirements.
Contains basic device	Meets the product standard´s requirements.
Contains module rack	Meets the product standard´s requirements.
Contains power supply	Meets the product standard´s requirements.
Contains analogue input module	Meets the product standard´s requirements.
Contains analogue output module	Does not apply, since the entire switchgear needs to be evaluated.
Contains digital input module	Does not apply, since the entire switchgear needs to be evaluated.
Contains digital output module	Meets the product standard´s requirements.
Contains function module	Meets the product standard´s requirements.
Contains technology module	Meets the product standard´s requirements.
Contains communication module	Does not apply, since the entire switchgear needs to be evaluated.
Contains memory unit	Does not apply, since the entire switchgear needs to be evaluated.
Contains simulation module	Is the panel builder´s responsibility.
Contains connection cable	Is the panel builder´s responsibility.
Contains control unit	Is the panel builder´s responsibility.
Contains monitor	Is the panel builder´s responsibility.
Contains programming software	Is the panel builder´s responsibility.
Contains engineering software	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Contains visualization	Is the panel builder´s responsibility.
Contains libraries	Is the panel builder´s responsibility.
Contains documentation	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Contains other components
Software preinstalled
Product Standards	Yes
UL File No.	Yes
UL Category Control No.	No
CSA File No.	Yes
CSA Class No.	Yes
North America Certification	No
Specially designed for North America	Yes
Current Limiting Circuit-Breaker	Yes
Degree of Protection	Yes

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.