alt
alt

XN-32DO-24VDC-0.5A-P
140161 XN-32DO-24VDC-0.5A-P
140161

Dijital çıkış blok modülü XI/ON, 24 V DC, 32DO, 0,5A, darbe anahtarlamalı XI/ON standart I/O sistemi, mükemmel modülerliği ve geniş fonksiyon çeşitliliği nedeniyle her uygulama için doğru I/O çözümünü sunar. Takılabilir modüller, modüllerin çalışırken değiştirilebilir olması, temel modül vidası veya gergi yayında kablolama, modüllerin mekanik kodlaması. Standart ağ geçitleri CANopen veri yolu sistemlerini, PROFIBUS-DP DeviceNet'i ve Ethernet'i destekler.

Dijital çıkış blok modülü XI/ON, 24 V DC, 32DO, 0,5A, darbe anahtarlamalı
XI/ON standart I/O sistemi, mükemmel modülerliği ve geniş fonksiyon çeşitliliği nedeniyle her uygulama için doğru I/O çözümünü sunar. Takılabilir modüller, modüllerin çalışırken değiştirilebilir olması, temel modül vidası veya gergi yayında kablolama, modüllerin mekanik kodlaması. Standart ağ geçitleri CANopen veri yolu sistemlerini, PROFIBUS-DP DeviceNet'i ve Ethernet'i destekler.

Function XI/ON I/O modules
Function XN Block module
Short Description 32 Digital output, 24 V DC/0.5 A
Positive switching
For use with XN-B6T-SBCSBC
XN-B6S-SBCSBC
Standards
Potential isolation EN 61000-6-2
EN 61000-6-4
EN 61131-2
Ambient temperature
>Ambient temperature, operation
Yes, through optocoupler
Ambient temperature
>Storage, transport [ϑ]
0 - +55 °C
Relative humidity
>Relative humidity
-25 - +85 °C
Ambient conditions, mechanical
>Degree of Protection
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanical
>Harmful gases
IP20
Vibration resistance, operating conditions SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Mechanical shock resistance according to IEC/EN 60068-2-6
Continuous shock resistance (IEC/EN 60068-2-29) according to IEC 60068-2-27 g
Drop and topple According to IEC 60068-2-29
Electromagnetic compatibility (EMC)
>ESD [Air/contact discharge]
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)
>Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)
>Burst
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)
>Surge
EN 61100-4-4
Electromagnetic compatibility (EMC)
>Radiated RFI
EN 61100-4-5
Electromagnetic compatibility (EMC)
>Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 61100-4-6 V
Electromagnetic compatibility (EMC)
>Voltage fluctuations/voltage dips
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)
>Type test
EN 61131-2
Approvals to EN 61131-2
Other technical data (sheet catalogue) CE, cULus
Channels Technical Data
Rated voltage through supply terminal [UL ]
Rated current consumption from supply terminal [IL ] 32 Number
Rated current consumption from module bus [IMB ] 24 V DC
Connectable sensors 30 mA
Diagnostics ≦ 30 mA
Diagnostics Resistive loads
Inductive loads
Lamp loads
Channels 8
Rated voltage through supply terminal [UL ] Yes
Rated current consumption from supply terminal [IL ]
Rated current consumption from module bus [IMB ] 32 Number
Load resistance
>Resistive load
24 V DC
Load resistance
>Inductive load
30 mA
Channels ≦ 30 mA
Rated voltage through supply terminal [UL ] ≧ 48 Ω
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] 1.2 h
Rated current consumption from module bus [IMB ]
Power loss [P] 32 Number
Output voltage
>High level [UH⁄UA ]
24 V DC
Output current
>High level (rated value) [IH ]
30 mA
Output current
>High level (permissible range) [IH ]
≦ 30 mA
Number of outputs switched in parallel [max.] Normally 5 W
Module total current > UL - 1 V DC
Delay on signal change and resistive load
>from Low to High level
0.5 A
Delay on signal change and resistive load
>From High to Low signal
< 1.0 A
Load resistance range 2
Utilization factor [%] 10 A
Can be connected 300 µs
Resistive load 300 µs
Inductive load > 48 Ω
Lamp load [RLL ] Max. 10 A (total module current) g
Switching frequency
>With resistive load [f]
Resistive loads
Inductive loads
Lamp loads
Number of diagnostic bytes ≧ 48 Ω
Diagnostics 1.2 h
Outputs to EN 61131-2 ≦ 6 W
Reset after short-circuit rectified [Ii ] 100 (RLO < 1 kΩ) Hz
Base modules
>with C connection
8
Channels Yes
Rated voltage through supply terminal [UL ] short-circuit proof
Rated current consumption from supply terminal [IL ] Automatic
Rated current consumption from module bus [IMB ] 2-wire/3-wire
XN-B6x-SBCSBC
Base modules
>with C connection
Rated voltage through supply terminal [UL ] 32 Number
Rated current consumption from supply terminal [IL ] 24 V DC
Rated current consumption from module bus [IMB ] 30 mA
Power loss [P] ≦ 30 mA
Can be connected 2-wire/3-wire
XN-B6x-SBCSBC
Utilization factor [g]
Base modules
>with C connection
24 V DC
Rated voltage through supply terminal [UL ] 30 mA
Rated current consumption from supply terminal [IL ] ≦ 30 mA
Rated current consumption from module bus [IMB ] Normally 5 W
Diagnostics Resistive loads
Inductive loads
Lamp loads
Power loss [P] 100 %
Channels 2-wire/3-wire
XN-B6x-SBCSBC
Rated voltage through supply terminal [UL ]
Rated current consumption from supply terminal [IL ] 24 V DC
Rated current consumption from module bus [IMB ] 30 mA
Output current
>High level (permissible range) [IH ]
≦ 30 mA
Output current
>High level (rated value) [IH ]
8
Lamp load [RLL ] 5 W
Short-circuit rating
Diagnostics 32 Number
Rated voltage through supply terminal [UL ] 24 V DC
Rated current consumption from supply terminal [IL ] 30 mA
Rated current consumption from module bus [IMB ] ≦ 30 mA
Power loss [P]
Number of diagnostic bytes < 1.0 A
Note for table header 0.5 A
Rated operational current for specified heat dissipation [In] ≦ 6 W
Heat dissipation per pole, current-dependent [Pvid] short-circuit proof
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs] 8
Heat dissipation capacity [Pdiss]
Operating ambient temperature min. 24 V DC
Operating ambient temperature max. 30 mA
Degree of Protection ≦ 30 mA
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
Normally 5 W
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
8
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects

The supply terminal (UL) provides power for the module electronics and for the consumers at the outputs. The total current required for each module consists of the sum of all partial currents.

Part of the XI/ON module’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL).

To increase the maximum output current to up to 1 A, two outputs can be connected in parallel.

10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation

The rated current from supply terminal data apply at zero load current.

Applies for resistive load: RLO < 1kΩ

10.2 Strength of materials and parts
>10.2.5 Lifting
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0 A
10.2 Strength of materials and parts
>10.2.7 Inscriptions
0 W
10.3 Degree of protection of ASSEMBLIES 0 W
10.4 Clearances and creepage distances 5 W
10.5 Protection against electric shock 0 W
10.6 Incorporation of switching devices and components 0 °C
10.7 Internal electrical circuits and connections +55 °C
10.8 Connections for external conductors IP20
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Meets the product standard´s requirements.
10.11 Short-circuit rating Meets the product standard´s requirements.
10.12 Electromagnetic compatibility Meets the product standard´s requirements.
10.13 Mechanical function Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 50 Hz Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 60 Hz Meets the product standard´s requirements.
Supply voltage DC Meets the product standard´s requirements.
Voltage type of supply voltage Meets the product standard´s requirements.
Number of digital inputs Does not apply, since the entire switchgear needs to be evaluated.
Number of digital outputs Does not apply, since the entire switchgear needs to be evaluated.
Digital inputs configurable Is the panel builder´s responsibility.
Digital outputs configurable Is the panel builder´s responsibility.
Input current at signal 1 Is the panel builder´s responsibility.
Permitted voltage at input Is the panel builder´s responsibility.
Type of voltage (input voltage) Is the panel builder´s responsibility.
Type of digital output The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Output current Is the panel builder´s responsibility.
Permitted voltage at output Is the panel builder´s responsibility.
Type of output voltage The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Short-circuit protection, outputs available
Number of HW-interfaces industrial Ethernet
Number of interfaces PROFINET 0 - 0 V
Number of HW-interfaces RS-232 0 - 0 V
Number of HW-interfaces RS-422 18 - 30 V
Number of HW-interfaces RS-485 DC
Number of HW-interfaces serial TTY 0
Number of HW-interfaces parallel 32
Number of HW-interfaces Wireless No
Number of HW-interfaces USB No
Number of HW-interfaces other 0 mA
With optical interface 0 - 0 V
Supporting protocol for TCP/IP DC
Supporting protocol for PROFIBUS Other
Supporting protocol for CAN 0.5 A
Supporting protocol for INTERBUS 0 - 29 V
Supporting protocol for ASI DC
Supporting protocol for KNX Yes
Supporting protocol for MODBUS 0
Supporting protocol for Data-Highway 0
Supporting protocol for DeviceNet 0
Supporting protocol for SUCONET 0
Supporting protocol for LON 0
Supporting protocol for PROFINET IO 0
Supporting protocol for PROFINET CBA 0
Supporting protocol for SERCOS 0
Supporting protocol for Foundation Fieldbus 0
Supporting protocol for EtherNet/IP 1
Supporting protocol for AS-Interface Safety at Work No
Supporting protocol for DeviceNet Safety No
Supporting protocol for INTERBUS-Safety Yes
Supporting protocol for PROFIsafe Yes
Supporting protocol for SafetyBUS p No
Supporting protocol for other bus systems No
Radio standard Bluetooth No
Radio standard WLAN 802.11 No
Radio standard GPRS No
Radio standard GSM Yes
Radio standard UMTS No
IO link master No
System accessory No
Degree of protection (IP) No
Type of electric connection No
Time delay at signal exchange No
Fieldbus connection over separate bus coupler possible No
Rail mounting possible No
Wall mounting/direct mounting No
Front build in possible No
Rack-assembly possible No
Suitable for safety functions No
Category according to EN 954-1 Yes
SIL according to IEC 61508 No
Performance level acc. EN ISO 13849-1 No
Appendant operation agent (Ex ia) No
Appendant operation agent (Ex ib) No
Explosion safety category for gas No
Explosion safety category for dust No
Width Yes
Height IP20
Depth Plug-in connection
Product Standards 0 - 0.3 ms
UL File No. Yes
UL Category Control No. Yes
CSA File No. No
CSA Class No. No
North America Certification No
Specially designed for North America No
Current Limiting Circuit-Breaker None
Degree of Protection None
Link to sheet catalogue None

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

EC4P-221-MTXD1
Eaton
EC4P-221-MTXX1
Eaton
EC4P-221-MRXD1
Eaton
EC4P-221-MRXX1
Eaton
EC4P-221-MTAD1
Eaton
EC4P-221-MTAX1
Eaton
EC4P-221-MRAD1
Eaton
EC4P-221-MRAX1
Eaton
EC4P-222-MTXD1
Eaton
EC4P-222-MTXX1
Eaton
EC4P-222-MRXD1
Eaton