XN-322-8AIO-U2
178791 XN-322-8AIO-U2
178791

Analog giriş ve çıkış modülü; 4 analog giriş ve 4 analog çıkış; +/-10V; Uref
Dört analog -10 ...+10 V (16 bit) çıkışa ve dört analog -10 - +10 V (12 bit) girişe / potansiyometre girişine (%0-100, referans çıkışı () sahip analog karışık I/O modülü +10 V/10 mA)), referans çıkışı (+10V/10mA)

Function	XN300 I/O slice modules
Connection technique	Push-in spring-cage terminal
Function	XN-322 analog input and output module for XN300
Short Description	4 analog inputs and 4 analog outputs, +/-10 V, Uref
For use with	XN-312-…
Standards
Approvals >Approvals	IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4
Approvals >shipping classification	CE, cULus EAC
Approvals	DNV GL
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	8 / 4 kV
Electromagnetic compatibility (EMC) >Burst >Supply cable	10 / 3 / 1 V/m
Electromagnetic compatibility (EMC) >Burst >Signal cable	2 kV
Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced)	1 kV
Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced)	0,5 / 0,5 kV
Electromagnetic compatibility (EMC) >Radiated RFI	1 kV
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	10 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	40 / 47 class A dB
Ambient conditions >Climatic conditions >Climatic proofing	Yes / 10 ms
Ambient conditions >Climatic conditions >Air pressure (operation)	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Ambient conditions >Climatic conditions >Relative humidity	795 - 1080 hPa
Ambient conditions >Climatic conditions >Condensation	0 - 95%, non condensing
Ambient conditions >Temperature >Operation	prevent with suitable measures
Ambient conditions >Temperature >Storage, transport [ϑ]	0 - +60 °C
Degree of Protection	-20 - +85 °C
Mounting position	IP20
Free fall, packaged (IEC/EN 60068-2-32)	Horizontal
Vibrations [3,5 mm / 1 g]	1 m
Mechanical shock resistance [Semisinusoidal 15 g/11 ms]	5 - 8.4 / 8.4 -150 Hz
Rated operational data >Insulating material group	18 Impacts
Rated operational data >Overvoltage category / pollution degree
Rated operational data >Rated operating voltage	I
Rated operational data >Maximum load current/cross-sectional area	III / 3
Connection design in TOP direction	160 V
Stripping length	X (not specified by plug manufacturer) A / mm²
Gauge pin IEC/EN 60947-1	Push-in spring-cage terminal (plug-in connection)
Connection specifications >"e" solid H07V-U	10 mm
Connection specifications >"f" flexible H 07V-K	A1
Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >Cable size	0.25 - 1.5 mm2
Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I]	0.25-1,5 mm2
Power supply - Input >Power supply >Current consumption for +24 V power supply [I]	24 - 16 AWG
Power supply - Input >Power supply >Potential isolation [PE (polyethylene)]
Power supply - Output >Sensor/transmitter supply >Rated operating voltage [Ua]	(typ.)50 mA
Power supply - Output >Sensor/transmitter supply >Rated operational current [Imax]	(typ.)60 mA
Power supply - Output >Sensor/transmitter supply >Potential isolation	no
Power supply - Output >Sensor/transmitter supply >Notes on power supply	10 V
Heat dissipation >Heat dissipation (without active channels)	0.0167 A
Heat dissipation >Max. heat dissipation	no
Heat dissipation >Notes on heat dissipation	Reference voltage output: permissible output current of 4.17 mA per channel
Channels	1.21 W
Measured variables	2.495 W
Resolution	The max. heat dissipation is specified as the maximum power produced inside the device´s housing.
Min. value refresh time/cycle time [per channel / all channels]
Hardware input filter	4 Quantity
Software input filter	Voltage or potentiometer
Potential isolation	16 Bit
Analog outputs >Channels	1 / 1 ms
Analog outputs >Output voltage >Output voltage, nominal value	Typically: 1 kHz, third-order low-pass filter
Analog outputs >Output voltage >Resolution	parameterizable
Analog outputs >Output voltage >Refresh time [All channels]	no
Analog outputs >Output voltage >For connection of:
Analog outputs >Load resistor >Resistive load	4 Quantity
Analog outputs >Load resistor >Capacitive load	-10 ... +10 V DC
Analog outputs >Short-circuit strength	12 Bit
Analog outputs >Short-circuit current [per channel]	1 ms
Analog outputs >Accuracy	2 conductors
Voltage measurement >Channels	>5000 Ω
Voltage measurement >Measurement ranges	0.1 µF
Voltage measurement >Value representation	yes
Voltage measurement >For connection of:	30 mA
Voltage measurement >Maximum input voltage	±0.5 % of full scale
Voltage measurement >Common-mode range
Voltage measurement >Input resistance	4 Quantity
Voltage measurement >Limiting frequency	-10 … +10 V DC
Voltage measurement >Accuracy	SIGNED16 m V
Voltage measurement >Notes on voltage measurement	2 conductors
Current measurement >Temperature coefficient	14 V DC
Rated operational current for specified heat dissipation [In]	±12 V DC
Heat dissipation per pole, current-dependent [Pvid]	> 10 MΩ
Equipment heat dissipation, current-dependent [Pvid]	Typically: 1 kHz (third-order low-pass filter)
Static heat dissipation, non-current-dependent [Pvs]	±0.3 % of full load
Heat dissipation capacity [Pdiss]	Open wire monitoring. The channels can also be used as potentiometer inputs.
Operating ambient temperature min.	not specified
Operating ambient temperature max.
Degree of Protection	0 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	2.495 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+55 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	IP20
10.2 Strength of materials and parts >10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Is the panel builder´s responsibility.
Supply voltage AC 50 Hz	Is the panel builder´s responsibility.
Supply voltage AC 60 Hz	Is the panel builder´s responsibility.
Supply voltage DC	Is the panel builder´s responsibility.
Voltage type of supply voltage	Is the panel builder´s responsibility.
Input, current	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Input, voltage	Is the panel builder´s responsibility.
Input, resistor	Is the panel builder´s responsibility.
Input, resistance thermometer	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Input, thermocouple
Input signal, configurable
Resolution of the analogue inputs	0 - 0 V
Output, current	0 - 0 V
Output, voltage	18 - 30 V
Output signal configurable	DC
Resolution of the analogue outputs	No
Number of analogue inputs	Yes
Number of analogue outputs	No
Analogue inputs configurable	No
Analogue outputs configurable	No
Number of HW-interfaces industrial Ethernet	No
Number of interfaces PROFINET	16 Bit
Number of HW-interfaces RS-232	No
Number of HW-interfaces RS-422	Yes
Number of HW-interfaces RS-485	No
Number of HW-interfaces serial TTY	12 Bit
Number of HW-interfaces parallel	4
Number of HW-interfaces Wireless	4
Number of HW-interfaces USB	Yes
Number of HW-interfaces other	Yes
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	0
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	1
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	No
Degree of protection (IP)	No
Degree of protection (NEMA)	No
Type of electric connection	No
Fieldbus connection over separate bus coupler possible	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	Yes
SIL according to IEC 61508	IP20
Performance level acc. EN ISO 13849-1
Appendant operation agent (Ex ia)	Screw-/spring clamp connection
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	Yes
Explosion safety category for dust	No
Width	No
Height	No
Depth	No
Product Standards
UL File No.	None

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.