XN-322-8AI-I
179288 XN-322-8AI-I
179288

Analog giriş modülü; 8 akım girişi 0/4'ten 20 mA'ya kadar
XN300 I/O sistemindeki XN-322 analog giriş dilim modülü, son değerin +/-%0,5 doğruluğu ile sekiz adet 0-20 mA / 4-20 mA akım girişi içerir, uA cinsinden ölçüm göstergesi, 16Bit (0,3uA çözünürlük) ), akım tüketimi 5V:55 mA, akım tüketimi 24V:35 mA

Function	XN300 I/O slice modules
Connection technique	Push-in spring-cage terminal
Function	XN-322 analog input module for XN300
Short Description	8 analog current inputs, 0/4 up to 20 mA
For use with	XN-312-…
Standards
Approvals >Approvals	IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4
Approvals >shipping classification	CE, cULus EAC
Approvals	DNV GL
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	8 / 4 kV
Electromagnetic compatibility (EMC) >Burst >Supply cable	10 / 3 / 1 V/m
Electromagnetic compatibility (EMC) >Burst >Signal cable	2 kV
Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced)	1 kV
Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced)	0,5 / 0,5 kV
Electromagnetic compatibility (EMC) >Radiated RFI	1 kV
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	10 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	40 / 47 class A dB
Ambient conditions >Climatic conditions >Climatic proofing	Yes / 10 ms
Ambient conditions >Climatic conditions >Air pressure (operation)	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Ambient conditions >Climatic conditions >Relative humidity	795 - 1080 hPa
Ambient conditions >Climatic conditions >Condensation	0 - 95%, non condensing
Ambient conditions >Temperature >Operation	prevent with suitable measures
Ambient conditions >Temperature >Storage, transport [ϑ]	0 - +60 °C
Degree of Protection	-20 - +85 °C
Mounting position	IP20
Free fall, packaged (IEC/EN 60068-2-32)	Horizontal
Vibrations [3,5 mm / 1 g]	1 m
Mechanical shock resistance [Semisinusoidal 15 g/11 ms]	5 - 8.4 / 8.4 -150 Hz
Rated operational data >Insulating material group	18 Impacts
Rated operational data >Overvoltage category / pollution degree
Rated operational data >Rated operating voltage	I
Rated operational data >Maximum load current/cross-sectional area	III / 3
Connection design in TOP direction	160 V
Stripping length	X (not specified by plug manufacturer) A / mm²
Gauge pin IEC/EN 60947-1	Push-in spring-cage terminal (plug-in connection)
Connection specifications >"e" solid H07V-U	10 mm
Connection specifications >"f" flexible H 07V-K	A1
Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)	0.2 - 1.5 mm2
Connection specifications >Cable size	0.25-1,5 mm2
Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I]	0.25-1,5 mm2
Power supply - Input >Power supply >Current consumption for +24 V power supply [I]	24 - 16 AWG
Power supply - Input >Power supply >Potential isolation [PE (polyethylene)]
Heat dissipation >Heat dissipation (without active channels)	(typ.)50 mA
Heat dissipation >Max. heat dissipation	(typ.)30 mA
Heat dissipation >Notes on heat dissipation	no
Channels	0.97 W
Measured variables	1.485 W
Resolution	The max. heat dissipation is specified as the maximum power produced inside the device´s housing.
Min. value refresh time/cycle time [per channel / all channels]
Hardware input filter	8 Quantity
Software input filter	Current
Potential isolation	16 Bit
Current measurement >Channels	1 / 1 ms
Current measurement >Measurement ranges	Typically: 1 kHz, third-order low-pass filter
Current measurement >Value representation	parameterizable
Current measurement >For connection of:	no
Current measurement >Maximum input current
Current measurement >Input resistance	8 Quantity
Current measurement >Limiting frequency	0 - 20 4 - 20 mA
Current measurement >Accuracy	SIGNED16
Rated operational current for specified heat dissipation [In]	2 conductors
Heat dissipation per pole, current-dependent [Pvid]	100 mA
Equipment heat dissipation, current-dependent [Pvid]	Normally 50 Ω
Static heat dissipation, non-current-dependent [Pvs]	Typically: 1 kHz (third-order low-pass filter)
Heat dissipation capacity [Pdiss]	±0.5 % of full scale
Operating ambient temperature min.
Operating ambient temperature max.	0 A
Degree of Protection	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	1.485 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	+55 °C
10.2 Strength of materials and parts >10.2.5 Lifting	IP20
10.2 Strength of materials and parts >10.2.6 Mechanical impact
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Supply voltage AC 50 Hz	Is the panel builder´s responsibility.
Supply voltage AC 60 Hz	Is the panel builder´s responsibility.
Supply voltage DC	Is the panel builder´s responsibility.
Voltage type of supply voltage	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Input, current	Is the panel builder´s responsibility.
Input, voltage	Is the panel builder´s responsibility.
Input, resistor	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Input, resistance thermometer
Input, thermocouple
Input signal, configurable	0 - 0 V
Resolution of the analogue inputs	0 - 0 V
Output, current	18 - 30 V
Output, voltage	DC
Output signal configurable	Yes
Resolution of the analogue outputs	No
Number of analogue inputs	No
Number of analogue outputs	No
Analogue inputs configurable	No
Analogue outputs configurable	No
Number of HW-interfaces industrial Ethernet	16 Bit
Number of interfaces PROFINET	No
Number of HW-interfaces RS-232	No
Number of HW-interfaces RS-422	No
Number of HW-interfaces RS-485	0 Bit
Number of HW-interfaces serial TTY	8
Number of HW-interfaces parallel	0
Number of HW-interfaces Wireless	Yes
Number of HW-interfaces USB	Yes
Number of HW-interfaces other	0
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	0
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	1
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	No
Degree of protection (IP)	No
Degree of protection (NEMA)	No
Type of electric connection	No
Fieldbus connection over separate bus coupler possible	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	Yes
Category according to EN 954-1	IP20
SIL according to IEC 61508
Performance level acc. EN ISO 13849-1	Screw-/spring clamp connection
Appendant operation agent (Ex ia)	Yes
Appendant operation agent (Ex ib)	Yes
Explosion safety category for gas	No
Explosion safety category for dust	No
Width	No
Height	No
Depth
Product Standards	None
UL File No.	None

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.