Analog giriş modülü; 8 termokupl girişi ve iki KTY girişi Soğuk bağlantı kompanzasyonu amacıyla sekiz termokupl ve iki KTY sıcaklık sensörü için analog giriş modülü.
Analog giriş modülü; 8 termokupl girişi ve iki KTY girişi
Soğuk bağlantı kompanzasyonu amacıyla sekiz termokupl ve iki KTY sıcaklık sensörü için analog giriş modülü.
| Function | XN300 I/O slice modules |
| Connection technique | Push-in spring-cage terminal |
| Function | XN-322 analog input module for XN300 |
| Short Description | 8 analog thermocouple inputs and two KTY inputs |
| For use with | XN-312-… |
| Standards | |
| Approvals >Approvals |
IEC/EN 61131-2 IEC/EN 61000-6-2 IEC/EN 61000-6-4 |
| Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
CE, cULus EAC |
| Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
8 / 4 kV |
| Electromagnetic compatibility (EMC) >Burst >Supply cable |
10 / 3 / 1 V/m |
| Electromagnetic compatibility (EMC) >Burst >Signal cable |
2 kV |
| Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced) |
1 kV |
| Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced) |
0,5 / 0,5 kV |
| Electromagnetic compatibility (EMC) >Radiated RFI |
1 kV |
| Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
10 V |
| Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
40 / 47 class A dB |
| Ambient conditions >Climatic conditions >Climatic proofing |
Yes / 10 ms |
| Ambient conditions >Climatic conditions >Air pressure (operation) |
Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3 |
| Ambient conditions >Climatic conditions >Relative humidity |
795 - 1080 hPa |
| Ambient conditions >Climatic conditions >Condensation |
0 - 95%, non condensing |
| Ambient conditions >Temperature >Operation |
prevent with suitable measures |
| Ambient conditions >Temperature >Storage, transport [ϑ] |
0 - +60 °C |
| Degree of Protection | -20 - +85 °C |
| Mounting position | IP20 |
| Free fall, packaged (IEC/EN 60068-2-32) | Horizontal |
| Vibrations [3,5 mm / 1 g] | 1 m |
| Mechanical shock resistance [Semisinusoidal 15 g/11 ms] | 5 - 8.4 / 8.4 -150 Hz |
| Rated operational data >Insulating material group |
18 Impacts |
| Rated operational data >Overvoltage category / pollution degree |
|
| Rated operational data >Rated operating voltage |
I |
| Rated operational data >Maximum load current/cross-sectional area |
III / 3 |
| Connection design in TOP direction | 160 V |
| Stripping length | X (not specified by plug manufacturer) A / mm² |
| Gauge pin IEC/EN 60947-1 | Push-in spring-cage terminal (plug-in connection) |
| Connection specifications >"e" solid H07V-U |
10 mm |
| Connection specifications >"f" flexible H 07V-K |
A1 |
| Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2 |
| Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2 |
| Connection specifications >Cable size |
0.25-1,5 mm2 |
| Power supply - Input >Power supply >Current consumption for +5 V power supply (internal) [I] |
0.25-1,5 mm2 |
| Power supply - Input >Power supply >Current consumption for +24 V power supply [I] |
24 - 16 AWG |
| Power supply - Input >Power supply >Potential isolation [PE (polyethylene)] |
|
| Heat dissipation >Heat dissipation (without active channels) |
(typ.)62 mA |
| Heat dissipation >Max. heat dissipation |
(typ.)75 mA |
| Heat dissipation >Notes on heat dissipation |
no |
| Channels | 2.11 W |
| Measured variables | 3.04 W |
| Resolution | The max. heat dissipation is specified as the maximum power produced inside the device´s housing. |
| Min. value refresh time/cycle time [per channel / all channels] | |
| Hardware input filter | 10 Quantity |
| Software input filter | temperature |
| Potential isolation | 16 Bit |
| Temperature and resistance measurement >Channels |
1 / 1 ms |
| Temperature and resistance measurement >Connectable sensors |
Typically: 2 Hz; third-order low-pass filter |
| Temperature and resistance measurement >Measurement ranges [temperature] |
parameterizable |
| Temperature and resistance measurement >Value representation |
no |
| Temperature and resistance measurement >For connection of: |
|
| Temperature and resistance measurement >Destruction limit [Umax] |
8 thermocouples, 2 KTYs Quantity |
| Temperature and resistance measurement >Accuracy |
Thermocouples, type J, K, T, E, N, S, R, B, L, UKTY10 |
| Temperature and resistance measurement >Notes on temperature and resistance measurements |
Type J: 0 ... +690 °C Type K: 0 ... +940 °C Type T: 0 ... +400 °C Type E: 0 ... +520 °C Type N: 0 ... +1080 °C Type S: 0 ... +1760 °C Type R: 0 ... +1760 °C Type B: 0 ... +1820 °C Type L: 0 ... +680 °C Type U: 0 ... +590 °C KTY10:-20 ... +80 °C |
| Rated operational current for specified heat dissipation [In] | SIGNED16 (0.1 °C) |
| Heat dissipation per pole, current-dependent [Pvid] | 2 conductors |
| Equipment heat dissipation, current-dependent [Pvid] | 265 V AC (thermocouples), 40V DC (KTY) |
| Static heat dissipation, non-current-dependent [Pvs] | ±0.7 % of full scale |
| Heat dissipation capacity [Pdiss] | A KTY sensor is included with the product. |
| Operating ambient temperature min. | |
| Operating ambient temperature max. | 0 A |
| Degree of Protection | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
3.04 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 °C |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
+55 °C |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
IP20 |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Supply voltage AC 50 Hz | Is the panel builder´s responsibility. |
| Supply voltage AC 60 Hz | Is the panel builder´s responsibility. |
| Supply voltage DC | Is the panel builder´s responsibility. |
| Voltage type of supply voltage | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Input, current | Is the panel builder´s responsibility. |
| Input, voltage | Is the panel builder´s responsibility. |
| Input, resistor | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Input, resistance thermometer | |
| Input, thermocouple | |
| Input signal, configurable | 0 - 0 V |
| Resolution of the analogue inputs | 0 - 0 V |
| Output, current | 18 - 30 V |
| Output, voltage | DC |
| Output signal configurable | No |
| Resolution of the analogue outputs | No |
| Number of analogue inputs | No |
| Number of analogue outputs | Yes |
| Analogue inputs configurable | Yes |
| Analogue outputs configurable | No |
| Number of HW-interfaces industrial Ethernet | 16 Bit |
| Number of interfaces PROFINET | No |
| Number of HW-interfaces RS-232 | No |
| Number of HW-interfaces RS-422 | No |
| Number of HW-interfaces RS-485 | 0 Bit |
| Number of HW-interfaces serial TTY | 8 |
| Number of HW-interfaces parallel | 0 |
| Number of HW-interfaces Wireless | Yes |
| Number of HW-interfaces USB | Yes |
| Number of HW-interfaces other | 0 |
| Supporting protocol for TCP/IP | 0 |
| Supporting protocol for PROFIBUS | 0 |
| Supporting protocol for CAN | 0 |
| Supporting protocol for INTERBUS | 0 |
| Supporting protocol for ASI | 0 |
| Supporting protocol for KNX | 0 |
| Supporting protocol for MODBUS | 0 |
| Supporting protocol for Data-Highway | 0 |
| Supporting protocol for DeviceNet | 1 |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| IO link master | No |
| System accessory | No |
| Degree of protection (IP) | No |
| Degree of protection (NEMA) | No |
| Type of electric connection | No |
| Fieldbus connection over separate bus coupler possible | No |
| Rail mounting possible | No |
| Wall mounting/direct mounting | No |
| Front build in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | Yes |
| Category according to EN 954-1 | IP20 |
| SIL according to IEC 61508 | |
| Performance level acc. EN ISO 13849-1 | Screw-/spring clamp connection |
| Appendant operation agent (Ex ia) | Yes |
| Appendant operation agent (Ex ib) | Yes |
| Explosion safety category for gas | No |
| Explosion safety category for dust | No |
| Width | No |
| Height | No |
| Depth | |
| Product Standards | None |
| UL File No. | None |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
