Function |
XN300 gateway |
Connection technique |
Push-in spring-cage terminal |
Function |
CANopen XN-312 gateway for XN300 |
Short Description |
XN300 CANopen gateway for running XN300 slice modules on a CANopen field bus |
Field bus connection |
CANopen® |
Service interface |
Mini USB Type B |
For use with |
XN-322-… |
Standards |
|
Approvals >Approvals |
EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
Approvals >shipping classification |
CE, cULus EAC |
Approvals |
DNV GL |
Potential isolation |
|
Ambient temperature |
yes |
Storage [ϑ] |
-25 - +85 °C |
Operating ambient temperature min. |
-40 - +80 °C |
Operating ambient temperature max. |
-25 °C |
Relative humidity |
+85 °C |
Vibration |
5-95%, non condensing |
Mechanical shock resistance |
according to IEC/EN 60068-2-6 |
Drop and topple |
according to IEC 60068-2-27 g |
Degree of Protection |
As per IEC 60068-2-31, free fall as per IEC 60068-2-32 |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
IP20 |
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
EN 61131-2 kV |
Electromagnetic compatibility (EMC) >Burst |
EN 61131-2 V/m |
Electromagnetic compatibility (EMC) >Surge |
EN 61131-2 |
Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61131-2 |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61131-2 V |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 61131-2 dB |
Electromagnetic compatibility (EMC) >Type test |
EN 61131-2 |
Static heat dissipation, non-current-dependent [Pvs] |
EN 61131-2 |
Current consumption for +24 V power supply [I] |
2.4 W |
Dimensions (W x H x D) |
(typ.)max. 2 A mA |
Rated data |
16.8 x 104.2 x 80.3 mm |
Connection design in TOP direction |
|
Stripping length |
according to VDE 0611 Part 1/8.92/IEC/EN 60947-7-1 |
Connectable conductors >Solid |
Push-In spring-cage terminals |
Connectable conductors >Flexible without ferrule |
10 mm |
Connectable conductors >Flexible with ferrule |
0.2 -1.5 mm2 |
Gauge pin IEC/EN 60947-1 |
0.2 -1.5 mm2
|
Bus |
0.25 -1.5 mm2 |
Bus protocol |
A1 |
Maximum station configuration |
|
System supply [Usys
] |
CANopen® |
Coordination type "2" [Usys] |
CANopen® |
Coordination type "1" [Usys] |
32 modules (XN-322) in slice design |
Field voltage [UL
] |
24 V DC |
Admissible range |
4.7…5.3 V DC |
Residual ripple |
19.2…30 V DC |
Service interface |
24 V DC |
Connection design for field bus |
18-30 V DC |
Data transfer rate |
According to EN 61131-2 % |
Data transfer rate setting |
Mini USB Type B |
Addressing |
Push-In spring-cage terminals |
Field bus termination |
10, 20, 50, 125, 250, 500, 800, 1000 kBit/s |
Static heat dissipation, non-current-dependent [Pvs] |
Through DIP switch or automatically |
Operating ambient temperature min. |
DIP switches |
Operating ambient temperature max. |
Via DIP switch |
Degree of Protection |
|
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
2.4 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
-25 °C |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
+85 °C |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
IP20 |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES |
Meets the product standard´s requirements. |
10.4 Clearances and creepage distances |
Meets the product standard´s requirements. |
10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections |
Meets the product standard´s requirements. |
10.8 Connections for external conductors |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise |
Is the panel builder´s responsibility. |
10.11 Short-circuit rating |
Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility |
Is the panel builder´s responsibility. |
10.13 Mechanical function |
Is the panel builder´s responsibility. |
Supply voltage AC 50 Hz |
Is the panel builder´s responsibility. |
Supply voltage AC 60 Hz |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Supply voltage DC |
Is the panel builder´s responsibility. |
Voltage type of supply voltage |
Is the panel builder´s responsibility. |
Supporting protocol for TCP/IP |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Supporting protocol for PROFIBUS |
|
Supporting protocol for CAN |
|
Supporting protocol for INTERBUS |
0 - 0 V |
Supporting protocol for ASI |
0 - 0 V |
Supporting protocol for KNX |
18 - 30 V |
Supporting protocol for MODBUS |
DC |
Supporting protocol for Data-Highway |
No |
Supporting protocol for DeviceNet |
No |
Supporting protocol for SUCONET |
Yes |
Supporting protocol for LON |
No |
Supporting protocol for SERCOS |
No |
Supporting protocol for PROFINET IO |
No |
Supporting protocol for PROFINET CBA |
No |
Supporting protocol for Foundation Fieldbus |
No |
Supporting protocol for EtherNet/IP |
No |
Supporting protocol for AS-Interface Safety at Work |
No |
Supporting protocol for DeviceNet Safety |
No |
Supporting protocol for INTERBUS-Safety |
No |
Supporting protocol for PROFIsafe |
No |
Supporting protocol for SafetyBUS p |
No |
Supporting protocol for other bus systems |
No |
Radio standard Bluetooth |
No |
Radio standard WLAN 802.11 |
No |
Radio standard GPRS |
No |
Radio standard GSM |
No |
Radio standard UMTS |
No |
IO link master |
No |
System accessory |
No |
Degree of protection (IP) |
No |
With potential separation |
No |
Fieldbus connection over separate bus coupler possible |
No |
Rail mounting possible |
No |
Wall mounting/direct mounting |
No |
Front build in possible |
No |
Rack-assembly possible |
Yes |
Suitable for safety functions |
IP20 |
Category according to EN 954-1 |
Yes |
SIL according to IEC 61508 |
No |
Performance level acc. EN ISO 13849-1 |
Yes |
Appendant operation agent (Ex ia) |
No |
Appendant operation agent (Ex ib) |
No |
Explosion safety category for gas |
No |
Explosion safety category for dust |
No |
Width |
|
Height |
None |
Depth |
None |
Product Standards |
No |
UL File No. |
No |