Dijital çıkış modülü XI/ON, 24 V DC, 2DO, 0,5A, darbe anahtarlamalı XI/ON standart I/O sistemi, mükemmel modülerliği ve geniş fonksiyon çeşitliliği nedeniyle her uygulama için doğru I/O çözümünü sunar. Takılabilir modüller, modüllerin çalışırken değiştirilebilir olması, temel modül vidası veya gergi yayında kablolama, modüllerin mekanik kodlaması. Standart ağ geçitleri CANopen veri yolu sistemlerini, PROFIBUS-DP DeviceNet'i ve Ethernet'i destekler.
Dijital çıkış modülü XI/ON, 24 V DC, 2DO, 0,5A, darbe anahtarlamalı
XI/ON standart I/O sistemi, mükemmel modülerliği ve geniş fonksiyon çeşitliliği nedeniyle her uygulama için doğru I/O çözümünü sunar. Takılabilir modüller, modüllerin çalışırken değiştirilebilir olması, temel modül vidası veya gergi yayında kablolama, modüllerin mekanik kodlaması. Standart ağ geçitleri CANopen veri yolu sistemlerini, PROFIBUS-DP DeviceNet'i ve Ethernet'i destekler.
| Function | XI/ON I/O modules |
| Function | XN Slice module |
| Short Description | 2 Digital output, 24 V DC/0.5 A Positive switching |
| For use with | XN-S3T-SBC XN-S3S-SBC XN-S4T-SBCS XN-S4S-SBCS |
| Standards | |
| Potential isolation | EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
| Ambient temperature >Ambient temperature, operation |
Yes, through optocoupler |
| Ambient temperature >Storage, transport [ϑ] |
0 - +55 °C |
| Relative humidity >Relative humidity |
-25 - +85 °C |
| Ambient conditions, mechanical >Degree of Protection |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
| Ambient conditions, mechanical >Harmful gases |
IP20 |
| Vibration resistance, operating conditions | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
| Mechanical shock resistance | according to IEC/EN 60068-2-6 |
| Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC 60068-2-27 g |
| Drop and topple | According to IEC 60068-2-29 |
| Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
EN 61000-4-2 kV |
| Electromagnetic compatibility (EMC) >Burst |
EN 61100-4-2 V/m |
| Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-4 |
| Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-5 |
| Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-6 V |
| Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 55016-2-3 dB |
| Electromagnetic compatibility (EMC) >Type test |
EN 61131-2 |
| Approvals | to EN 61131-2 |
| Other technical data (sheet catalogue) | CE, cULus |
| Channels | Technical Data |
| Rated voltage through supply terminal [UL ] | |
| Rated current consumption from supply terminal [IL ] | 2 Number |
| Rated current consumption from module bus [IMB ] | 24 V DC |
| Connectable sensors | 20 mA |
| Diagnostics | ≦ 32 mA |
| Diagnostics | Resistive loads Inductive loads Lamp loads |
| Channels | 2 |
| Rated voltage through supply terminal [UL ] | Yes |
| Rated current consumption from supply terminal [IL ] | |
| Rated current consumption from module bus [IMB ] | 2 Number |
| Load resistance >Resistive load |
24 V DC |
| Load resistance >Inductive load |
20 mA |
| Channels | ≦ 32 mA |
| Rated voltage through supply terminal [UL ] | ≧ 48 Ω |
| Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | 1.2 h |
| Rated current consumption from module bus [IMB ] | |
| Power loss [P] | 2 Number |
| Output voltage >High level [UH⁄UA ] |
24 V DC |
| Output current >High level (rated value) [IH ] |
20 mA |
| Output current >High level (permissible range) [IH ] |
≦ 32 mA |
| Module total current | Normally 1 W |
| Delay on signal change and resistive load >from Low to High level |
> UL - 1 V DC |
| Delay on signal change and resistive load >From High to Low signal |
0.5 A |
| Load resistance range | < 0.6 A |
| Utilization factor [%] | 1 A |
| Can be connected | 100 µs |
| Resistive load | 100 µs |
| Inductive load | > 48 Ω |
| Lamp load [RLL ] | 100 g |
| Switching frequency >With resistive load [f] |
Resistive loads Inductive loads Lamp loads |
| Switching frequency >with inductive load |
≧ 48 Ω |
| Switching frequency >Switching frequency with lamp load [f] |
1.2 h |
| Number of diagnostic bytes | ≦ 3 W |
| Diagnostics | 5000 (RLO < 1 kΩ) Hz |
| Outputs to EN 61131-2 | < 2 |
| Reset after short-circuit rectified [Ii ] | 10 Hz |
| Base modules >with C connection |
2 |
| Channels | Yes |
| Rated voltage through supply terminal [UL ] | Protected |
| Rated current consumption from supply terminal [IL ] | Automatic |
| Rated current consumption from module bus [IMB ] | 2-wire/3-wire XN-S3x-SBC 4-wire XN-S4x-SBCS |
| Input voltage >High level [UeH] |
|
| Base modules >with C connection |
2 Number |
| Rated voltage through supply terminal [UL ] | 24 V DC |
| Rated current consumption from supply terminal [IL ] | 20 mA |
| Rated current consumption from module bus [IMB ] | ≦ 32 mA |
| Power loss [P] | min. L+ (1 V) V |
| Can be connected | 2-wire/3-wire XN-S3x-SBC 4-wire XN-S4x-SBCS |
| Utilization factor [g] | |
| Base modules >with C connection |
24 V DC |
| Rated voltage through supply terminal [UL ] | 20 mA |
| Rated current consumption from supply terminal [IL ] | ≦ 32 mA |
| Rated current consumption from module bus [IMB ] | Normally 1 W |
| Diagnostics | Resistive loads Inductive loads Lamp loads |
| Power loss [P] | 100 % |
| Channels | 2-wire/3-wire XN-S3x-SBC 4-wire XN-S4x-SBCS |
| Rated voltage through supply terminal [UL ] | |
| Rated current consumption from supply terminal [IL ] | 24 V DC |
| Rated current consumption from module bus [IMB ] | 20 mA |
| Input voltage >High level [UeH] |
≦ 32 mA |
| Output current >High level (permissible range) [IH ] |
2 |
| Output current >High level (rated value) [IH ] |
1 W |
| Switching frequency >with resistive load |
|
| Switching frequency >Inductive load |
2 Number |
| Switching frequency >Switching frequency with lamp load [f] |
24 V DC |
| Lamp load [RLL ] | 20 mA |
| Short-circuit rating | ≦ 32 mA |
| Diagnostics | |
| Rated voltage through supply terminal [UL ] | min. L+ (1 V) V |
| Rated current consumption from supply terminal [IL ] | |
| Rated current consumption from module bus [IMB ] | < 0.6 A |
| Power loss [P] | 0.5 A |
| Number of diagnostic bytes | 5000 Hz |
| Note for table header | 2 Hz |
| Rated operational current for specified heat dissipation [In] | 10 Hz |
| Heat dissipation per pole, current-dependent [Pvid] | ≦ 3 W |
| Equipment heat dissipation, current-dependent [Pvid] | Protected |
| Static heat dissipation, non-current-dependent [Pvs] | |
| Heat dissipation capacity [Pdiss] | 2 |
| Operating ambient temperature min. | |
| Operating ambient temperature max. | 24 V DC |
| Degree of Protection | 20 mA |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
≦ 32 mA |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Normally 1 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
2 |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
The supply terminal (UL) provides power for the module electronics and for the consumers at the outputs. The total current required for each module consists of the sum of all partial currents. Part of the XI/ON module’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL). To increase the maximum output current to up to 1 A, two outputs can be connected in parallel. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
The rated current from supply terminal data apply at zero load current. Applies for resistive load: RLO < 1kΩ |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
0 A |
| 10.3 Degree of protection of ASSEMBLIES | 0 W |
| 10.4 Clearances and creepage distances | 0 W |
| 10.5 Protection against electric shock | 1 W |
| 10.6 Incorporation of switching devices and components | 0 W |
| 10.7 Internal electrical circuits and connections | 0 °C |
| 10.8 Connections for external conductors | +55 °C |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
IP20 |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
|
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Meets the product standard´s requirements. |
| Supply voltage AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage AC 60 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage DC | Meets the product standard´s requirements. |
| Voltage type of supply voltage | Meets the product standard´s requirements. |
| Number of digital inputs | Meets the product standard´s requirements. |
| Number of digital outputs | Does not apply, since the entire switchgear needs to be evaluated. |
| Digital inputs configurable | Does not apply, since the entire switchgear needs to be evaluated. |
| Digital outputs configurable | Is the panel builder´s responsibility. |
| Input current at signal 1 | Is the panel builder´s responsibility. |
| Permitted voltage at input | Is the panel builder´s responsibility. |
| Type of voltage (input voltage) | Is the panel builder´s responsibility. |
| Type of digital output | Is the panel builder´s responsibility. |
| Output current | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Permitted voltage at output | Is the panel builder´s responsibility. |
| Type of output voltage | Is the panel builder´s responsibility. |
| Short-circuit protection, outputs available | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of HW-interfaces industrial Ethernet | |
| Number of interfaces PROFINET | |
| Number of HW-interfaces RS-232 | 0 - 0 V |
| Number of HW-interfaces RS-422 | 0 - 0 V |
| Number of HW-interfaces RS-485 | 18 - 30 V |
| Number of HW-interfaces serial TTY | DC |
| Number of HW-interfaces parallel | 0 |
| Number of HW-interfaces Wireless | 2 |
| Number of HW-interfaces USB | No |
| Number of HW-interfaces other | No |
| With optical interface | 0 mA |
| Supporting protocol for TCP/IP | 0 - 0 V |
| Supporting protocol for PROFIBUS | DC |
| Supporting protocol for CAN | Other |
| Supporting protocol for INTERBUS | 0.5 A |
| Supporting protocol for ASI | 0 - 29 V |
| Supporting protocol for KNX | DC |
| Supporting protocol for MODBUS | No |
| Supporting protocol for Data-Highway | 0 |
| Supporting protocol for DeviceNet | 0 |
| Supporting protocol for SUCONET | 0 |
| Supporting protocol for LON | 0 |
| Supporting protocol for PROFINET IO | 0 |
| Supporting protocol for PROFINET CBA | 0 |
| Supporting protocol for SERCOS | 0 |
| Supporting protocol for Foundation Fieldbus | 0 |
| Supporting protocol for EtherNet/IP | 0 |
| Supporting protocol for AS-Interface Safety at Work | 1 |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | Yes |
| Supporting protocol for SafetyBUS p | Yes |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | Yes |
| IO link master | No |
| System accessory | No |
| Degree of protection (IP) | No |
| Type of electric connection | No |
| Time delay at signal exchange | No |
| Fieldbus connection over separate bus coupler possible | No |
| Rail mounting possible | No |
| Wall mounting/direct mounting | No |
| Front build in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| Category according to EN 954-1 | No |
| SIL according to IEC 61508 | Yes |
| Performance level acc. EN ISO 13849-1 | No |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | No |
| Explosion safety category for dust | No |
| Width | No |
| Height | Yes |
| Depth | IP20 |
| Product Standards | Plug-in connection |
| UL File No. | 0 - 0.1 ms |
| UL Category Control No. | Yes |
| CSA File No. | Yes |
| CSA Class No. | No |
| North America Certification | No |
| Specially designed for North America | No |
| Current Limiting Circuit-Breaker | No |
| Degree of Protection | None |
| Link to sheet catalogue | None |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
