1 x XC-303-C32-002, 1 x XN-322-8DIO-PD05, yama kablosu ve CODESYS V3 için yazılım lisansından oluşan başlangıç kiti SW-XSOFT-CODESYS-3-M programlama yazılımı (ürün no. 171887) için yazılım lisansına sahip bir adet XC-303-C32-002, bir adet XN-322-8DIO-PD05 dijital giriş ve çıkış modülünden oluşan XC303 modüler PLC başlangıç seti (ürün no. 183178) ve bir adet 1 m Cat6 yama kablosu.
1 x XC-303-C32-002, 1 x XN-322-8DIO-PD05, yama kablosu ve CODESYS V3 için yazılım lisansından oluşan başlangıç kiti
SW-XSOFT-CODESYS-3-M programlama yazılımı (ürün no. 171887) için yazılım lisansına sahip bir adet XC-303-C32-002, bir adet XN-322-8DIO-PD05 dijital giriş ve çıkış modülünden oluşan XC303 modüler PLC başlangıç seti (ürün no. 183178) ve bir adet 1 m Cat6 yama kablosu.
| Approvals | CE, cULus EAC |
| certificate | CE |
| Connection design in TOP direction | Push-in spring-cage terminal |
| Standards | |
| Approvals >Approvals |
EN 61131 |
| Approvals >certificate |
CE, cULus EAC |
| Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
CE |
| Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
8 / 4 kV |
| Electromagnetic compatibility (EMC) >Burst >Supply cable |
10 / 3 / 1 V/m |
| Electromagnetic compatibility (EMC) >Burst >Signal cable |
2 kV |
| Electromagnetic compatibility (EMC) >Surge >Supply cable (balanced / unbalanced) |
1 kV |
| Electromagnetic compatibility (EMC) >Surge >Signal cable (unbalanced) |
0,5 / 0,5 kV |
| Electromagnetic compatibility (EMC) >Radiated RFI |
1 kV |
| Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
10 V |
| Ambient conditions >Climatic conditions >Climatic proofing |
40 / 47 class A dB |
| Ambient conditions >Climatic conditions >Air pressure (operation) |
Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3 |
| Ambient conditions >Climatic conditions >Relative humidity |
795 - 1080 hPa |
| Ambient conditions >Climatic conditions >Condensation |
< 95%, non-condensing |
| Ambient conditions >Temperature >Operation |
prevent with suitable measures |
| Ambient conditions >Temperature >Storage, transport [ϑ] |
0 - +55 °C |
| Degree of Protection | -20 - +80 °C |
| Mounting position | IP20 |
| Free fall, packaged (IEC/EN 60068-2-32) | Vertical (on horizontal top-hat rail) |
| Vibrations [3,5 mm / 1 g] | 1 m |
| Rated operational data >Insulating material group |
5 - 8.4 / 8.4 -150 Hz |
| Rated operational data >Rated operating voltage |
|
| Connection design in TOP direction | I |
| Stripping length | 160 V |
| Gauge pin IEC/EN 60947-1 | Push-in spring-cage terminal |
| Connection specifications >"e" solid H07V-U |
10 mm |
| Connection specifications >"f" flexible H 07V-K |
A1 |
| Connection specifications >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2 |
| Connection specifications >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.2 - 1.5 mm2 |
| Connection specifications >Cable size |
0.25-1.5 mm2 |
| Power supply - Input >Power supply >Rated operating voltage [Ue] |
0.25-1.5 mm2 |
| Power supply - Input >Power supply >Rated operational current [Ie] |
24 - 16 AWG |
| Power supply - Input >Power supply >Potential isolation [PE (polyethylene)] |
|
| Heat dissipation >Max. heat dissipation |
24 V |
| Heat dissipation >Notes on heat dissipation |
2.8 A |
| Input voltage >Nominal input voltage [Ue] |
no |
| Input voltage >Low level [UeL] |
9.472 W |
| Input voltage >High level [UeH] |
The max. heat dissipation is specified as the maximum power produced inside the device´s housing. |
| Input current >Low level⁄active level [IeL] |
|
| Input current >High level⁄active level [IeH] |
24 V DC |
| Short-circuit rating | 0.2 - 1.5 V |
| Potential isolation | +15 < UeH < +30 V |
| Heat dissipation (internal, per active channel) | ≤1.1 mA |
| Utilization factor [%] | ≥2.3 mA |
| Delay on signal change and resistive load >from Low to High level |
|
| Delay on signal change and resistive load >From High to Low signal |
Yes |
| Notes on digital outputs | No Output against output |
| Static heat dissipation, non-current-dependent [Pvs] | 0.1 W |
| Operating ambient temperature min. | 100% (Ʃ IAmax = 2A) g |
| Operating ambient temperature max. | < 200, 100 µs |
| Degree of Protection | < 200, 150 µs |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Protective devices must be installed directly at the inductive load in order to prevent interference. |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
9.472 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 °C |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
+55 °C |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
IP20 |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Supply voltage AC 50 Hz | Is the panel builder´s responsibility. |
| Supply voltage AC 60 Hz | Is the panel builder´s responsibility. |
| Supply voltage DC | Is the panel builder´s responsibility. |
| Voltage type of supply voltage | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Number of relay outputs | Is the panel builder´s responsibility. |
| Max. number of time switches | Is the panel builder´s responsibility. |
| Model | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Processing time (1K, binary operation) | |
| Number of HW-interfaces industrial Ethernet | |
| Number of interfaces PROFINET | 0 - 0 V |
| Number of HW-interfaces RS-232 | 0 - 0 V |
| Number of HW-interfaces RS-422 | 18 - 30 V |
| Number of HW-interfaces RS-485 | DC |
| Number of HW-interfaces USB | 0 |
| Number of HW-interfaces parallel | 1000 |
| Number of HW-interfaces Wireless | Modular |
| Number of HW-interfaces other | 0.0011 ms |
| Number of analogue outputs | 3 |
| Number of analogue inputs | 0 |
| Number of digital inputs | 0 |
| Number of digital outputs | 0 |
| With optical interface | 0 |
| Supporting protocol for TCP/IP | 1 |
| Supporting protocol for PROFIBUS | 0 |
| Supporting protocol for CAN | 0 |
| Supporting protocol for INTERBUS | 2 |
| Supporting protocol for ASI | 0 |
| Supporting protocol for KNX | 0 |
| Supporting protocol for MODBUS | 8 |
| Supporting protocol for Data-Highway | 8 |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | Yes |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | Yes |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | Yes |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | Yes |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| IO link master | No |
| System accessory | No |
| Redundancy | No |
| With display | Yes |
| Type of memory | No |
| Memory size | No |
| Additional program memory possible | No |
| Rail mounting possible | No |
| Wall mounting/direct mounting | No |
| Front build in possible | No |
| Rack-assembly possible | Yes |
| Suitable for safety functions | Yes |
| Category according to EN 954-1 | No |
| SIL according to IEC 61508 | RAM |
| Performance level acc. EN ISO 13849-1 | 512000 kByte |
| Appendant operation agent (Ex ia) | Yes |
| Appendant operation agent (Ex ib) | Yes |
| Explosion safety category for gas | No |
| Explosion safety category for dust | No |
| Width | No |
| Height | No |
| Depth | |
| Product Standards | None |
| UL File No. | None |
| North America Certification | No |
| Specially designed for North America | No |
| Current Limiting Circuit-Breaker | None |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
