Product range	Control relays easyE4
Subrange	easyE4 analog input/output enhancements
Basic function	easyE4 extensions
Description	Input/output extension for easyE4 control relay Expandable with the easyE4 series of digital input/output expansions with easy-E4-CONNECT1 connector (Item Y7-197225) Rated operating voltage 24V DC Analog inputs: 4 Analog outputs: 2 Screw terminals
Inputs expansion (number)
Analog	Analog: 4
Display	4
Software
Supply voltage	with diagnostic LED
For use with	EASYSOFT-SWLIC/easySoft 7
Standards	24 V DC
Approvals >Approvals	easyE4
Approvals >certificate
Approvals >shipping classification	EN 61000-6-2 EN 61000-6-3 IEC 60068-2-6 IEC 60068-2-27 IEC 60068-2-30 IEC 61131-2 EN 61010 EN 50178
Approvals	cULus
Dimensions (W x H x D)	CE
Weight	DNV GL
Mounting
Connection type	35.5 x 90 x 58 mm
Screw terminals >Solid	0.088 kg
Screw terminals >flexible	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Screw terminals >Solid or flexible conductor, with ferrule	screw terminal
Screw terminals >Solid or stranded
Screw terminals >Standard screwdriver	0.2 - 4 mm2
Screw terminals >Tightening torque	0.2 - 2.5 mm2
Screw terminals >Stripping length	0,2 - 2,5 mm2
Operating ambient temperature	22 - 12 AWG
Condensation	0.8 x 3.5 mm
Storage [ϑ]	0.5 - 0.7 Nm
relative humidity	6.5 mm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4)	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations	Take appropriate measures to prevent condensation
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	-40 - +70 °C
Drop to IEC/EN 60068-2-31 [Drop height]	in accordance with IEC 60068-2-30, IEC 60068-2-78 5 - 95 %
Free fall, packaged (IEC/EN 60068-2-32)	795 - 1080 hPa
Mounting position
Overvoltage category/pollution degree	IP20
Electrostatic discharge (ESD) >applied standard	In accordance with IEC 60068-2-6 constant amplitude 0.15 mm: 10 - 57 constant acceleration 2 g: 57 - 150 Hz
Electrostatic discharge (ESD) >Air discharge	18 Impacts
Electrostatic discharge (ESD) >Contact discharge	50 mm
Electromagnetic fields (RFI) to IEC EN 61000-4-3	0.3 m
Radio interference suppression	Vertical or horizontal
Burst
power pulses (Surge)	III/2
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	according to IEC EN 61000-4-2
Clearance in air and creepage distances	8 kV
Insulation resistance	6 kV
Rated operational voltage [Ue]	0.8 - 1.0 GHz: 10 1.4 - 2 GHz: 3 2.0 - 2.7 GHz: 1 V/m
Permissible range [Ue]	EN 61000-6-3 Class B
Residual ripple	according to IEC/EN 61000-4-4 Supply cables: 2 Signal cables: 2 kV
Protection against polarity reversal	according to IEC/EN 61000-4-5 0.5 kV (supply cables, symmetrical) 1 kV (supply cables, asymmetrical)
Input current	10 V
Voltage dips
Fuse	nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Power loss [P]	in accordance with EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Heat dissipation at 24 V DC
Number	24 DC (-15/+20%) V
Potential isolation	20.4 - 28.8 V DC
Input type	≦ 5 %
Signal range	yes
Resolution	max. 100 mA at Ue
Input impedance	≤ 10 ms
Cable length	≧ 1A (T) A
Number	Normally 2.5 W
Potential isolation	2.5 W
Output type
Signal range	4
Resolution	from power supply: no to the in/outputs: no to expansion devices: yes
Accuracy >-25 °C - 55 °C	Voltage or current, selectable per input
Cable length	0-10 V DC 0 - 20 mA 4 - 20 mA
Power loss [P]	12 Bit (value 0 - 4095)
Static heat dissipation, non-current-dependent [Pvs]	12.122 kΩ
Operating ambient temperature min.	≦ 10, screened m
Operating ambient temperature max.
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	2
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	from power supply: no to the in/outputs: no to the expansion units: yes
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Voltage or current, selectable per input
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0-10 V DC 0 - 20 mA 4 - 20 mA
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	12 Bit (value 0 - 4095)
10.2 Strength of materials and parts >10.2.5 Lifting	1 %
10.2 Strength of materials and parts >10.2.6 Mechanical impact	≦ 10, shielded m
10.2 Strength of materials and parts >10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES	2.5 W
10.4 Clearances and creepage distances
10.5 Protection against electric shock	2.5 W
10.6 Incorporation of switching devices and components	-25 °C
10.7 Internal electrical circuits and connections	+55 °C
10.8 Connections for external conductors
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 50 Hz	Meets the product standard´s requirements.
Supply voltage AC 60 Hz	Meets the product standard´s requirements.
Supply voltage DC	Meets the product standard´s requirements.
Voltage type of supply voltage	Does not apply, since the entire switchgear needs to be evaluated.
Switching current	Does not apply, since the entire switchgear needs to be evaluated.
Number of analogue inputs	Is the panel builder´s responsibility.
Number of analogue outputs	Is the panel builder´s responsibility.
Number of digital inputs	Is the panel builder´s responsibility.
Number of digital outputs	Is the panel builder´s responsibility.
With relay output	Is the panel builder´s responsibility.
Number of HW-interfaces industrial Ethernet	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of interfaces PROFINET	Is the panel builder´s responsibility.
Number of HW-interfaces RS-232	Is the panel builder´s responsibility.
Number of HW-interfaces RS-422	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of HW-interfaces RS-485
Number of HW-interfaces serial TTY
Number of HW-interfaces USB	0 - 0 V
Number of HW-interfaces parallel	0 - 0 V
Number of HW-interfaces Wireless	20.4 - 28.8 V
Number of HW-interfaces other	DC
With optical interface	0.5 A
Supporting protocol for TCP/IP	4
Supporting protocol for PROFIBUS	2
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	No
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	0
Supporting protocol for LON	0
Supporting protocol for PROFINET IO	0
Supporting protocol for PROFINET CBA	0
Supporting protocol for SERCOS	0
Supporting protocol for Foundation Fieldbus	2
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
Redundancy	No
With display	No
Degree of protection (IP)	No
Basic device	No
Expandable	No
Expansion device	No
With timer	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	No
Explosion safety category for dust	IP20
Width	No
Height	Yes
Depth	Yes
UL File No.	No
UL Category Control No.	Yes
North America Certification	Yes
Degree of Protection	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.