| Basic function |
easyE4 base device |
| Description |
Electronic control relay with display with Ethernet interface Expandable with the easyE4 series of digital input/output expansions with easy-E4-CONNECT1 connector (Item Y7-197225) Rated operating voltage 24V DC 8 digital inputs, No. of these can be used as analog inputs - 4 Digital outputs: 4 transistor Screw terminals Delivery with customized user program is possible via Item (Y7) -2010781 EASY-COMBINATION |
| Digital |
|
| of which can be used as analog |
8 |
| Quantity of outputs |
4 |
| Real time clock |
|
| Display & keypad |
Transistor: 4 |
| Expansions |
|
| Supply voltage |
✔ |
| Software |
✔ |
| Connection type |
Expandable networkable (Ethernet) |
| Standards |
24 V DC |
Approvals >Approvals |
EASYSOFT-SWLIC/easySoft 7 |
Approvals >certificate |
screw terminal |
Approvals >shipping classification |
|
| Approvals |
EN 61000-6-2 EN 61000-6-3 IEC 60068-2-6 IEC 60068-2-27 IEC 60068-2-30 IEC 61131-2 EN 61010 EN 50178 |
| Dimensions (W x H x D) |
cULus |
| Weight |
CE |
| Mounting |
DNV GL |
| Connection type |
 |
Ethernet >Connections |
71.5 x 90 x 58 mm |
Ethernet >Cable |
0.178 kg |
Screw terminals >Solid |
Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories) |
Screw terminals >flexible |
screw terminal |
Screw terminals >Solid or flexible conductor, with ferrule |
RJ45 plug, 8-pin |
Screw terminals >Solid or stranded |
CAT5 |
Screw terminals >Standard screwdriver |
|
Screw terminals >Tightening torque |
0.2 - 4 mm2 |
Screw terminals >Stripping length |
0.2 - 2.5 mm2
|
| Display - Type |
0,2 - 2,5 mm2
|
| Lines x characters |
22 - 12 AWG |
| Operating ambient temperature |
0.8 x 3.5 mm |
| Condensation |
0.5 - 0.7 Nm |
| LCD display (clearly legible) |
6.5 mm |
| Storage [ϑ] |
|
| relative humidity |
Monochrome |
| Air pressure (operation) |
6 x 16 |
| Protection type (IEC/EN 60529, EN50178, VBG 4) |
|
| Vibrations |
-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C |
| Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms |
Take appropriate measures to prevent condensation |
| Drop to IEC/EN 60068-2-31 [Drop height] |
0 - 55 °C |
| Free fall, packaged (IEC/EN 60068-2-32) |
-40 - +70 °C |
| Mounting position |
in accordance with IEC 60068-2-30, IEC 60068-2-78 5 - 95 % |
| Overvoltage category/pollution degree |
795 - 1080 hPa |
Electrostatic discharge (ESD) >applied standard |
|
Electrostatic discharge (ESD) >Air discharge |
IP20 |
Electrostatic discharge (ESD) >Contact discharge |
In accordance with IEC 60068-2-6 constant amplitude 0.15 mm: 10 - 57 constant acceleration 2 g: 57 - 150 Hz |
| Electromagnetic fields (RFI) to IEC EN 61000-4-3 |
18 Impacts |
| Radio interference suppression |
50 mm |
| Burst |
0.3 m |
| power pulses (Surge) |
Vertical or horizontal |
| Immunity to line-conducted interference to (IEC/EN 61000-4-6) |
|
| Clearance in air and creepage distances |
III/2 |
| Insulation resistance |
according to IEC EN 61000-4-2 |
| Back-up of real-time clock |
8 kV |
| Accuracy of real-time clock to inputs |
6 kV |
| Accuracy of timing relays (of values) |
0.8 - 1.0 GHz: 10 1.4 - 2 GHz: 3 2.0 - 2.7 GHz: 1 V/m |
Resolution >Range “S” |
EN 61000-6-3 Class B |
Resolution >Range “M:S” |
according to IEC/EN 61000-4-4 Supply cables: 2 Signal cables: 2 kV |
Resolution >Range “H:M” |
according to IEC/EN 61000-4-5 0.5 kV (supply cables, symmetrical) 1 kV (supply cables, asymmetrical) |
| Rated operational voltage [Ue] |
10 V |
| Permissible range [Ue] |
|
| Residual ripple |
nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Protection against polarity reversal |
per EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Input current |
|
| Voltage dips |
 |
| Fuse |
① Backup time (hours) with fully charged double layer capacitor ② Service life (years) |
| Power loss [P] |
typ. ± 2 (± 0.2 h⁄Year) s/day |
| Heat dissipation at 24 V DC |
depending on ambient air temperature fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible |
| Number |
|
| Inputs can be used as analog inputs |
± 0.02 % |
| Status Display |
5 ms |
| Potential isolation |
1 s |
| Rated operational voltage [Ue] |
1 min |
| Input voltage |
|
| Input current at signal 1 |
24 DC (-15/+20%) V |
| Deceleration time |
20.4 - 28.8 V DC |
| Cable length |
≦ 5 % |
Frequency counter >Number |
yes |
Frequency counter >Counter frequency |
max. 80 mA at Ue |
Frequency counter >Pulse shape |
≤ 10 ms |
Frequency counter >Pulse pause ratio |
≧ 1A (T) A |
Frequency counter >Cable length |
Normally 2 W |
Incremental counter >Number of counter inputs |
2 W |
Incremental counter >Value range |
|
Incremental counter >Counter frequency |
8 |
Incremental counter >Pulse shape |
4 (I5, I6, I7, I8) |
Incremental counter >Signal offset |
LCD-Display |
Incremental counter >Pulse pause ratio |
from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes |
Incremental counter >Cable length |
24 V DC |
Rapid counter inputs >Number |
Signal 0: ≦ 5 (I1 - I8) Condition 1: ≧ 15 (I1 - I8) V DC |
Rapid counter inputs >Value range |
3.3 (I1 – I4) 1.8 (I5 – I8) mA |
Rapid counter inputs >Counter frequency |
20 (0 -> 1/1 -> 0, Debounce ON) type 0.015 (0 -> 1/1 -> 0, Debounce OFF) ms |
Rapid counter inputs >Pulse shape |
100 (unshielded) m |
Rapid counter inputs >Pulse pause ratio |
4 (I1, I2, I3, I4) |
Rapid counter inputs >Cable length |
≦ 5 kHz |
| Number |
Square |
| Potential isolation |
1:1 |
| Input type |
≦ 20 (screened) m |
| Signal range |
2 (I1 + I2, I3 + I4) |
| Resolution |
-2147483648 to +2147483647 |
| Input impedance |
≦ 5 kHz |
Accuracy of actual value >two devices from series |
Square |
Accuracy of actual value >Within a single device |
90° |
| Conversion time, analog/digital |
1:1 |
| Input current |
≦ 20 (screened) m |
| Cable length |
4 (I1, I2, I3, I4) |
| Number |
-2147483648 to +2147483647 |
| Rated operational voltage [Ue] |
≦ 10 kHz |
| Permissible range [Ue] |
Square |
| Residual ripple |
1:1 |
| Supply current |
≦ 20 (screened) m |
| Protection against polarity reversal |
|
| Potential isolation |
4 (I5, I6, I7, I8) |
| Rated operational current at signal „1” DC per channel [Ie] |
from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes |
| Residual current on 0 signal per channel |
DC voltage |
| Max. output voltage |
0-10 V DC |
| Short-circuit protection |
12 Bit (value 0 - 4095) |
| Short-circuit tripping current for Ra ≦ 10 mΩ |
13.3 kΩ |
| Total short-circuit current |
± 3 , ± 0.12 V % |
| Thermal cutout |
± 2, ± 0.12 V % |
| Max. operating frequency with constant resistive load |
each CPU cycle ms |
Parallel connection of outputs >With resistive load, inductive load with external suppressor circuit, combination within a group |
< 1 mA |
Parallel connection of outputs >Number of outputs [max.] |
≦ 30, screened m |
Parallel connection of outputs >Max. total current |
|
| Output status indication |
4 |
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H
>Utilization factor |
24 V DC |
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H
>Duty factor |
20.4 - 28.8 V DC |
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H
>Utilization factor |
5 % |
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H
>Duty factor |
Norm./max. 15 mA |
Inductive load to EN 60947-5-1 >With external suppressor circuit >Utilization factor |
Yes (Caution: A short circuit will occur if a supply voltage of the wrong polarity is applied to the outputs.) |
Inductive load to EN 60947-5-1 >With external suppressor circuit >Duty factor |
from power supply: yes to the memory card: yes to Ethernet: yes From the inputs: yes to control buttons: yes between the outputs: no to expansion devices: yes |
Inductive load to EN 60947-5-1 >With external suppressor circuit >Max. switching frequency, max. duty factor |
Max. 0.5 A |
| Power loss [P] |
< 0.005 mA |
| Data transfer rate |
1 (at status 0 per channel) U = Ue - 1 V (signal 1 at Ie = 0.5 A) V |
| Connections |
yes, electronic (Q1 - Q4) |
| Cable |
0.7 ≦ Ie ≦ 1.7 per output depending on number of active channels and their load A |
| Static heat dissipation, non-current-dependent [Pvs] |
6.8 A |
| Operating ambient temperature min. |
Yes |
| Operating ambient temperature max. |
abhängig von der Zykluszeit des Basisgeräts und bei Erweiterungsgeräten auch von deren Übertragungszeit Operations/h |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Group 1: Q1 to Q4 |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
4 |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
2 A |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
LCD-display |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0.25 g |
10.2 Strength of materials and parts >10.2.5 Lifting |
100 % DF |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0.25 g |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
100 % DF |
| 10.3 Degree of protection of ASSEMBLIES |
1 g |
| 10.4 Clearances and creepage distances |
100 % DF |
| 10.5 Protection against electric shock |
Depending on the suppressor circuit Operations |
| 10.6 Incorporation of switching devices and components |
|
| 10.7 Internal electrical circuits and connections |
2 W |
| 10.8 Connections for external conductors |
|
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
10/100 Mbit/s |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
RJ45 plug, 8-pin |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
CAT5 |
| 10.10 Temperature rise |
|
| 10.11 Short-circuit rating |
2 W |
| 10.12 Electromagnetic compatibility |
-25 °C |
| 10.13 Mechanical function |
+55 °C |
| Supply voltage AC 50 Hz |
|
| Supply voltage AC 60 Hz |
Meets the product standard´s requirements. |
| Supply voltage DC |
Meets the product standard´s requirements. |
| Voltage type of supply voltage |
Meets the product standard´s requirements. |
| Switching current |
Meets the product standard´s requirements. |
| Number of analogue inputs |
Meets the product standard´s requirements. |
| Number of analogue outputs |
Does not apply, since the entire switchgear needs to be evaluated. |
| Number of digital inputs |
Does not apply, since the entire switchgear needs to be evaluated. |
| Number of digital outputs |
Meets the product standard´s requirements. |
| With relay output |
Meets the product standard´s requirements. |
| Number of HW-interfaces industrial Ethernet |
Meets the product standard´s requirements. |
| Number of interfaces PROFINET |
Does not apply, since the entire switchgear needs to be evaluated. |
| Number of HW-interfaces RS-232 |
Does not apply, since the entire switchgear needs to be evaluated. |
| Number of HW-interfaces RS-422 |
Is the panel builder´s responsibility. |
| Number of HW-interfaces RS-485 |
Is the panel builder´s responsibility. |
| Number of HW-interfaces serial TTY |
Is the panel builder´s responsibility. |
| Number of HW-interfaces USB |
Is the panel builder´s responsibility. |
| Number of HW-interfaces parallel |
Is the panel builder´s responsibility. |
| Number of HW-interfaces Wireless |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Number of HW-interfaces other |
Is the panel builder´s responsibility. |
| With optical interface |
Is the panel builder´s responsibility. |
| Supporting protocol for TCP/IP |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Supporting protocol for PROFIBUS |
|
| Supporting protocol for CAN |
|
| Supporting protocol for INTERBUS |
0 - 0 V |
| Supporting protocol for ASI |
0 - 0 V |
| Supporting protocol for KNX |
20.4 - 28.8 V |
| Supporting protocol for MODBUS |
DC |
| Supporting protocol for Data-Highway |
0.5 A |
| Supporting protocol for DeviceNet |
4 |
| Supporting protocol for SUCONET |
0 |
| Supporting protocol for LON |
8 |
| Supporting protocol for PROFINET IO |
4 |
| Supporting protocol for PROFINET CBA |
No |
| Supporting protocol for SERCOS |
1 |
| Supporting protocol for Foundation Fieldbus |
0 |
| Supporting protocol for EtherNet/IP |
0 |
| Supporting protocol for AS-Interface Safety at Work |
0 |
| Supporting protocol for DeviceNet Safety |
0 |
| Supporting protocol for INTERBUS-Safety |
0 |
| Supporting protocol for PROFIsafe |
0 |
| Supporting protocol for SafetyBUS p |
0 |
| Supporting protocol for other bus systems |
0 |
| Radio standard Bluetooth |
1 |
| Radio standard WLAN 802.11 |
No |
| Radio standard GPRS |
Yes |
| Radio standard GSM |
No |
| Radio standard UMTS |
No |
| IO link master |
No |
| Redundancy |
No |
| With display |
No |
| Degree of protection (IP) |
Yes |
| Basic device |
No |
| Expandable |
No |
| Expansion device |
No |
| With timer |
No |
| Rail mounting possible |
No |
| Wall mounting/direct mounting |
No |
| Front build in possible |
No |
| Rack-assembly possible |
No |
| Suitable for safety functions |
No |
| Category according to EN 954-1 |
No |
| SIL according to IEC 61508 |
No |
| Performance level acc. EN ISO 13849-1 |
No |
| Appendant operation agent (Ex ia) |
No |
| Appendant operation agent (Ex ib) |
No |
| Explosion safety category for gas |
No |
| Explosion safety category for dust |
No |
| Width |
No |
| Height |
No |
| Depth |
No |
| UL File No. |
No |
| UL Category Control No. |
No |
| North America Certification |
No |
| Degree of Protection |
Yes |