alt
alt

EASY-E4-DC-12TCX1
197214 EASY-E4-DC-12TCX1
Y7-197214

Kontrol röleleri, easyE4 (genişletilebilir, Ethernet), 24 V DC, Dijital Girişler: 8, analog olarak kullanılabilenler: 4, vidalı terminal 24 VDC besleme voltajına sahip elektronik kontrol rölesi easy-E4. 24VDC'li 8 dijital giriş mevcuttur, bunlardan 4'ü analog giriş olarak ve 4'ü hızlı sayaç olarak da kullanılabilir. Easy-E4 kontrol rölesi 24 VDC için 4 geçiş çıkışına sahiptir. Kontrol rölesi teşhis LED'leri, bir saat, entegre bir Ethernet arayüzü ve vidalı terminallerle donatılmıştır. Bu kontrol rölesi easy-E4, easyE4 serisinin dijital giriş/çıkış genişletmeleriyle genişletilebilir. Kendi kullanıcı programına sahip bir teslimat, (Y7) -2010781 EASY-COMBINATION makalesi aracılığıyla mümkündür.

Kontrol röleleri, easyE4 (genişletilebilir, Ethernet), 24 V DC, Dijital Girişler: 8, analog olarak kullanılabilenler: 4, vidalı terminal
24 VDC besleme voltajına sahip elektronik kontrol rölesi easy-E4. 24VDC'li 8 dijital giriş mevcuttur, bunlardan 4'ü analog giriş olarak ve 4'ü hızlı sayaç olarak da kullanılabilir. Easy-E4 kontrol rölesi 24 VDC için 4 geçiş çıkışına sahiptir. Kontrol rölesi teşhis LED'leri, bir saat, entegre bir Ethernet arayüzü ve vidalı terminallerle donatılmıştır. Bu kontrol rölesi easy-E4, easyE4 serisinin dijital giriş/çıkış genişletmeleriyle genişletilebilir. Kendi kullanıcı programına sahip bir teslimat, (Y7) -2010781 EASY-COMBINATION makalesi aracılığıyla mümkündür.

Basic function easyE4 base device
Description Electronic control relay
with diagnostic LEDs
with Ethernet interface
Expandable with the easyE4 series of digital input/output expansions with easy-E4-CONNECT1 connector (Item Y7-197225)
Rated operating voltage 24V DC
8 digital inputs, No. of these can be used as analog inputs - 4
Digital outputs: 4 transistor
Screw terminals
Delivery with customized user program is possible via Item (Y7) -2010781 EASY-COMBINATION
Digital
of which can be used as analog 8
Quantity of outputs 4
Real time clock
Expansions Transistor: 4
Supply voltage
Software
Connection type Expandable
networkable (Ethernet)
Standards 24 V DC
Approvals
>Approvals
EASYSOFT-SWLIC/easySoft 7
Approvals
>certificate
screw terminal
Approvals
>shipping classification
Approvals EN 61000-6-2
EN 61000-6-3
IEC 60068-2-6
IEC 60068-2-27
IEC 60068-2-30
IEC 61131-2
EN 61010
EN 50178
Dimensions (W x H x D) cULus
Weight CE
Mounting DNV GL
Connection type 0000SPC-596
Ethernet
>Connections
71.5 x 90 x 58 mm
Ethernet
>Cable
0.155 kg
Screw terminals
>Solid
Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Screw terminals
>flexible
screw terminal
Screw terminals
>Solid or flexible conductor, with ferrule
RJ45 plug, 8-pin
Screw terminals
>Solid or stranded
CAT5
Screw terminals
>Standard screwdriver
Screw terminals
>Tightening torque
0.2 - 4 mm2
Screw terminals
>Stripping length
0.2 - 2.5 mm2
Status indicator (LED) 0,2 - 2,5 mm2
Operating ambient temperature 22 - 12 AWG
Condensation 0.8 x 3.5 mm
Storage [ϑ] 0.5 - 0.7 Nm
relative humidity 6.5 mm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4) Power/RUN
Ethernet
Vibrations
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms -25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Drop to IEC/EN 60068-2-31 [Drop height] Take appropriate measures to prevent condensation
Free fall, packaged (IEC/EN 60068-2-32) -40 - +70 °C
Mounting position in accordance with IEC 60068-2-30, IEC 60068-2-78
5 - 95 %
Overvoltage category/pollution degree 795 - 1080 hPa
Electrostatic discharge (ESD)
>applied standard
Electrostatic discharge (ESD)
>Air discharge
IP20
Electrostatic discharge (ESD)
>Contact discharge
In accordance with IEC 60068-2-6
constant amplitude 0.15 mm: 10 - 57
constant acceleration 2 g: 57 - 150 Hz
Electromagnetic fields (RFI) to IEC EN 61000-4-3 18 Impacts
Radio interference suppression 50 mm
Burst 0.3 m
power pulses (Surge) Vertical or horizontal
Immunity to line-conducted interference to (IEC/EN 61000-4-6)
Clearance in air and creepage distances III/2
Insulation resistance according to IEC EN 61000-4-2
Back-up of real-time clock 8 kV
Accuracy of real-time clock to inputs 6 kV
Accuracy of timing relays (of values) 0.8 - 1.0 GHz: 10
1.4 - 2 GHz: 3
2.0 - 2.7 GHz: 1 V/m
Resolution
>Range “S”
EN 61000-6-3 Class B
Resolution
>Range “M:S”
according to IEC/EN 61000-4-4
Supply cables: 2
Signal cables: 2 kV
Resolution
>Range “H:M”
according to IEC/EN 61000-4-5
0.5 kV (supply cables, symmetrical)
1 kV (supply cables, asymmetrical)
Rated operational voltage [Ue] 10 V
Permissible range [Ue]
Residual ripple nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Protection against polarity reversal per EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Input current
Voltage dips 252U084
Fuse ① Backup time (hours) with fully charged double layer capacitor
② Service life (years)
Power loss [P] typ. ± 2 (± 0.2 h⁄Year) s/day
Heat dissipation at 24 V DC depending on ambient air temperature fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible
Number
Inputs can be used as analog inputs ± 0.02 %
Potential isolation 5 ms
Rated operational voltage [Ue] 1 s
Input voltage 1 min
Input current at signal 1
Deceleration time 24 DC (-15/+20%) V
Cable length 20.4 - 28.8 V DC
Frequency counter
>Number
≦ 5 %
Frequency counter
>Counter frequency
yes
Frequency counter
>Pulse shape
max. 80 mA at Ue
Frequency counter
>Pulse pause ratio
≤ 10 ms
Frequency counter
>Cable length
≧ 1A (T) A
Incremental counter
>Number of counter inputs
Normally 2 W
Incremental counter
>Value range
2 W
Incremental counter
>Counter frequency
Incremental counter
>Pulse shape
8
Incremental counter
>Signal offset
4 (I5, I6, I7, I8)
Incremental counter
>Pulse pause ratio
from power supply: no
to the memory card: no
to Ethernet: yes
between inputs: no
from the outputs: yes
to expansion devices: yes
Incremental counter
>Cable length
24 V DC
Rapid counter inputs
>Number
Signal 0: ≦ 5 (I1 - I8)
Condition 1: ≧ 15 (I1 - I8) V DC
Rapid counter inputs
>Value range
3.3 (I1 – I4)
1.8 (I5 – I8) mA
Rapid counter inputs
>Counter frequency
20 (0 -> 1/1 -> 0, Debounce ON)
type 0.015 (0 -> 1/1 -> 0, Debounce OFF) ms
Rapid counter inputs
>Pulse shape
100 (unshielded) m
Rapid counter inputs
>Pulse pause ratio
4 (I1, I2, I3, I4)
Rapid counter inputs
>Cable length
≦ 5 kHz
Number Square
Potential isolation 1:1
Input type ≦ 20 (screened) m
Signal range 2 (I1 + I2, I3 + I4)
Resolution -2147483648 to +2147483647
Input impedance ≦ 5 kHz
Accuracy of actual value
>two devices from series
Square
Accuracy of actual value
>Within a single device
90°
Conversion time, analog/digital 1:1
Input current ≦ 20 (screened) m
Cable length 4 (I1, I2, I3, I4)
Number -2147483648 to +2147483647
Rated operational voltage [Ue] ≦ 10 kHz
Permissible range [Ue] Square
Residual ripple 1:1
Supply current ≦ 20 (screened) m
Protection against polarity reversal
Potential isolation 4 (I5, I6, I7, I8)
Rated operational current at signal „1” DC per channel [Ie] from power supply: no
to the memory card: no
to Ethernet: yes
between inputs: no
from the outputs: yes
to expansion devices: yes
Residual current on 0 signal per channel DC voltage
Max. output voltage 0-10 V DC
Short-circuit protection 12 Bit (value 0 - 4095)
Short-circuit tripping current for Ra ≦ 10 mΩ 13.3 kΩ
Total short-circuit current ± 3 , ± 0.12 V %
Thermal cutout ± 2, ± 0.12 V %
Max. operating frequency with constant resistive load each CPU cycle ms
Parallel connection of outputs
>With resistive load, inductive load with external suppressor circuit, combination within a group
< 1 mA
Parallel connection of outputs
>Number of outputs [max.]
≦ 30, screened m
Parallel connection of outputs
>Max. total current
Inductive load to EN 60947-5-1
>Without external suppressor circuit
>DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H
>Utilization factor
4
Inductive load to EN 60947-5-1
>Without external suppressor circuit
>DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H
>Duty factor
24 V DC
Inductive load to EN 60947-5-1
>Without external suppressor circuit
>T0.95 = 15 ms, R = 48 Ω, L = 0.24 H
>Utilization factor
20.4 - 28.8 V DC
Inductive load to EN 60947-5-1
>Without external suppressor circuit
>T0.95 = 15 ms, R = 48 Ω, L = 0.24 H
>Duty factor
5 %
Inductive load to EN 60947-5-1
>With external suppressor circuit
>Utilization factor
Norm./max. 15 mA
Inductive load to EN 60947-5-1
>With external suppressor circuit
>Duty factor
Yes (Caution: A short circuit will occur if a supply voltage of the wrong polarity is applied to the outputs.)
Inductive load to EN 60947-5-1
>With external suppressor circuit
>Max. switching frequency, max. duty factor
from power supply: yes
to the memory card: yes
to Ethernet: yes
From the inputs: yes
to control buttons: yes
between the outputs: no
to expansion devices: yes
Power loss [P] Max. 0.5 A
Data transfer rate < 0.005 mA
Connections 1 (at status 0 per channel)
U = Ue - 1 V (signal 1 at Ie = 0.5 A) V
Cable yes, electronic (Q1 - Q4)
Static heat dissipation, non-current-dependent [Pvs] 0.7 ≦ Ie ≦ 1.7 per output
depending on number of active channels and their load A
Operating ambient temperature min. 6.8 A
Operating ambient temperature max. Yes
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
abhängig von der Zykluszeit des Basisgeräts und bei Erweiterungsgeräten auch von deren Übertragungszeit Operations/h
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Group 1: Q1 to Q4
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
4
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
2 A
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
0.25 g
10.2 Strength of materials and parts
>10.2.5 Lifting
100 % DF
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0.25 g
10.2 Strength of materials and parts
>10.2.7 Inscriptions
100 % DF
10.3 Degree of protection of ASSEMBLIES 1 g
10.4 Clearances and creepage distances 100 % DF
10.5 Protection against electric shock Depending on the suppressor circuit Operations
10.6 Incorporation of switching devices and components
10.7 Internal electrical circuits and connections 2 W
10.8 Connections for external conductors
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
10/100 Mbit/s
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
RJ45 plug, 8-pin
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
CAT5
10.10 Temperature rise
10.11 Short-circuit rating 2 W
10.12 Electromagnetic compatibility -25 °C
10.13 Mechanical function +55 °C
Supply voltage AC 50 Hz
Supply voltage AC 60 Hz Meets the product standard´s requirements.
Supply voltage DC Meets the product standard´s requirements.
Voltage type of supply voltage Meets the product standard´s requirements.
Switching current Meets the product standard´s requirements.
Number of analogue inputs Meets the product standard´s requirements.
Number of analogue outputs Does not apply, since the entire switchgear needs to be evaluated.
Number of digital inputs Does not apply, since the entire switchgear needs to be evaluated.
Number of digital outputs Meets the product standard´s requirements.
With relay output Meets the product standard´s requirements.
Number of HW-interfaces industrial Ethernet Meets the product standard´s requirements.
Number of interfaces PROFINET Does not apply, since the entire switchgear needs to be evaluated.
Number of HW-interfaces RS-232 Does not apply, since the entire switchgear needs to be evaluated.
Number of HW-interfaces RS-422 Is the panel builder´s responsibility.
Number of HW-interfaces RS-485 Is the panel builder´s responsibility.
Number of HW-interfaces serial TTY Is the panel builder´s responsibility.
Number of HW-interfaces USB Is the panel builder´s responsibility.
Number of HW-interfaces parallel Is the panel builder´s responsibility.
Number of HW-interfaces Wireless The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of HW-interfaces other Is the panel builder´s responsibility.
With optical interface Is the panel builder´s responsibility.
Supporting protocol for TCP/IP The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supporting protocol for PROFIBUS
Supporting protocol for CAN
Supporting protocol for INTERBUS 0 - 0 V
Supporting protocol for ASI 0 - 0 V
Supporting protocol for KNX 20.4 - 28.8 V
Supporting protocol for MODBUS DC
Supporting protocol for Data-Highway 0.5 A
Supporting protocol for DeviceNet 4
Supporting protocol for SUCONET 0
Supporting protocol for LON 8
Supporting protocol for PROFINET IO 4
Supporting protocol for PROFINET CBA No
Supporting protocol for SERCOS 1
Supporting protocol for Foundation Fieldbus 0
Supporting protocol for EtherNet/IP 0
Supporting protocol for AS-Interface Safety at Work 0
Supporting protocol for DeviceNet Safety 0
Supporting protocol for INTERBUS-Safety 0
Supporting protocol for PROFIsafe 0
Supporting protocol for SafetyBUS p 0
Supporting protocol for other bus systems 0
Radio standard Bluetooth 1
Radio standard WLAN 802.11 No
Radio standard GPRS Yes
Radio standard GSM No
Radio standard UMTS No
IO link master No
Redundancy No
With display No
Degree of protection (IP) Yes
Basic device No
Expandable No
Expansion device No
With timer No
Rail mounting possible No
Wall mounting/direct mounting No
Front build in possible No
Rack-assembly possible No
Suitable for safety functions No
Category according to EN 954-1 No
SIL according to IEC 61508 No
Performance level acc. EN ISO 13849-1 No
Appendant operation agent (Ex ia) No
Appendant operation agent (Ex ib) No
Explosion safety category for gas No
Explosion safety category for dust No
Width No
Height No
Depth No
UL File No. No
UL Category Control No. No
North America Certification No
Degree of Protection No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

EASY-NT-RJ45
Eaton
EASY-E4-UC-12RC1
Eaton
EASY-E4-UC-12RCX1
Eaton
EASY-E4-DC-12TC1
Eaton
EASY-E4-DC-12TCX1
Eaton
EASY-E4-AC-12RC1
Eaton
EASY-E4-AC-12RCX1
Eaton
EASY-E4-UC-8RE1
Eaton