Ürün Açıklaması

Compact PLC, 24 V DC, 12DI(of 4AI), 8DO(T), 1AO, CAN, display
Compact controller for small and medium-sized automation tasks, programming according to IEC 61131 (CoDeSys), the Ethernet interface and the serial interface (ec4p-222 types) are for the purpose of programming, the communication via UDP and Modbus as well as connection of OPC clients

Description	Expandable: Inputs/outputs and bus systems individual laser inscription possible with EC4-COMBINATION-*
Digital	easyNet/CANopen® on board
of which can be used as analog
Transistor	12
Analog	4
Display & keypad
Supply voltage	8
Dimensions (W x H x D)	1
Weight
Mounting	✓
Solid	24 V DC
Flexible with ferrule
Standard screwdriver	107.5 x 90 x 72 without/79 with adapter for MCC (6 SU) mm
Max. tightening torque	0.3 kg
Operating ambient temperature	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using 3 fixing brackets ZB4-101-GF1 (accessories)
Condensation
LCD display (clearly legible)	0.2/4 (AWG 22 - 12) mm2
Storage [ϑ]	0.2/2.5 (AWG 22 - 12) mm2
Relative humidity, non-condensing (IEC/EN 60068-2-30)	0.8 x 3.5 mm
Air pressure (operation)	0.6 Nm
Protection type (IEC/EN 60529, EN50178, VBG 4)
Vibrations (IEC/EN 60068-2-6) >Constant amplitude 0.15 mm	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations (IEC/EN 60068-2-6) >Constant acceleration 2 g	Take appropriate measures to prevent condensation
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	0 - 55 °C
Drop to IEC/EN 60068-2-31 [Drop height]	-40 - +70 °C
Free fall, packaged (IEC/EN 60068-2-32)	5 - 95 %
Mounting position	1080 - 1080 hPa
Overvoltage category/pollution degree
Electrostatic discharge (ESD) >applied standard	IP20
Electrostatic discharge (ESD) >Air discharge	10 - 57 Hz
Electrostatic discharge (ESD) >Contact discharge	57 - 150 Hz
Electromagnetic fields (RFI) to IEC EN 61000-4-3	18 Impacts
Radio interference suppression	50 mm
Burst	1 m
Burst >Supply cable	Vertical or horizontal
Burst >Signal lines
power pulses (Surge)	II/2
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	IEC EN 61000-4-2, Level 3
Clearance in air and creepage distances	8 kV
Insulation resistance	6 kV
Back-up of real-time clock	10 V/m
Accuracy of the real-time clock	EN 55011 Class B, EN 55022 Class B
Write cycles of the retentive memory	IEC/EN 61000-4-4, level 3 kV
Rated operational voltage [Ue]	2 kV
Permissible range [Ue]	2 kV
Residual ripple	2 kV (supply cables, symmetrical, EASY...AC) 0.5 kV (supply cables, symmetrical, easy-DC) according to IEC/EN 61000-4-5
Input current	10 V
Voltage dips
Heat dissipation [P]	EN 50178, UL 508, CSA C22.2, No. 142
Processor	EN 50178
Memory >Program code/data
Memory >Marker/retentive data
Cycle time for 1 k of instructions (Bit, Byte)	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
PRG interface RS232 >Data transfer rate	part no. ± 5 (± 0.5 h⁄Year) s/day
PRG interface RS232 >Connection types
PRG interface RS232 >Potential isolation	10000000000 (10¹⁰) (Read-write cycles)
PRG interface RS232 >Master mode >Data transfer rate
PRG interface RS232 >Master mode >Character formats	24 DC (-15/+20%) V
PRG interface RS232 >Master mode >Number of transmission bytes in a block	20.4 - 28.8 V DC
PRG interface RS232 >Master mode >Number of received bytes in a block	≦ 5 %
Ethernet >Data transfer rate	normally 140 mA at Ue
Ethernet >Connection types	≤ 10 (IEC/EN 61131-2) ms
Ethernet >Potential isolation	Normally 3.4 W
CANopen® >Data transfer rate
CANopen® >Bus termination (first and last station)	Infineon XC161
CANopen® >Connection types	256/14 segments of 16 KB each kByte
Master mode >Number	16/4/4/8 KByte
Mode slave >Stations	< 0.3 ms
Mode slave >PDO type
Mode slave >Control contact rated current	4.8, 9.6, 19.2, 38.4, 57.6, 115.2 (character format: 8 bit data, no parity, 1 stop bit) kBit/s
Number	RJ45-bus
Inputs can be used as analog inputs	none
Status Display	0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6 kbit/s
Potential isolation	8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Rated operational voltage [Ue]	190 bytes
Input voltage	190 bytes
Input current on 1 signal >Input current at signal 1	10 MBit/s, 100 m Mbit/s
Deceleration time	RJ45
Cable length	No
Incremental counter >Number of counter inputs	500 kBit/s, 25 m 250 kBit/s, 60m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Incremental counter >Value range	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
Incremental counter >Counter frequency	2 x RJ45, 8 pole
Incremental counter >Pulse shape	8
Incremental counter >Counter inputs	max. 126 Number
Incremental counter >Reference input	Asynchronous, cyclic, acyclic
Incremental counter >Input for reference switch	To DS 301 V4
Incremental counter >Counter inputs I1 and I2, I3 and I4
Incremental counter >Signal offset	12
Rapid counter inputs >Number	4 (I7, I8, I11, I12)
Rapid counter inputs >Value range	LCD-Display
Rapid counter inputs >Cable length	from the outputs: yes to network easyNet, easyLink
Rapid counter inputs >Counter frequency	24 V DC
Rapid counter inputs >Pulse shape	< 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0" > 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1" V DC
Number	3.3 (I1 to I6) 2.2 (I7, I8) 3.3 (I9, I10) 2.2 (I11, I12) mA
Potential isolation	normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") ms
Input type	100 (unshielded) m
Signal range	1 (I1, I2, I3, I4)
Resolution	32 Bit
Input impedance	≦ 40 kHz
Accuracy of actual value >Within a single device	Square
Conversion time, analog/digital	I1, I2
Input current	I3
Cable length	I4
Number	1
Output type	90°
Max. output current	2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Load resistance	16/32 Bit
Overload and short-circuit protection	≦ 20 (screened) m
Resolution	≦ 50 kHz
Recovery time	Square
Accuracy >-25 °C - 55 °C
Accuracy >25°C	4 (I7, I8, I11, I12)
Conversion time, analog/digital	from the outputs: yes to interface/memory card: no
Number	DC voltage
Rated operational voltage [Ue]	0-10 V DC
Permissible range [Ue]	0.01 V analog 0.01 V digital 10 Bit (value 0 - 1023)
Residual ripple	11.2 kΩ
Supply current	± 2, (I7, I8, I11, I12) ± 0.12 V %
Protection against polarity reversal	each CPU cycle ms
Potential isolation	< 1 mA
Rated operational current at signal „1” DC per channel [Ie]	≦ 30, screened m
Lamp load without Rv per channel
Residual current on 0 signal per channel	1
Max. output voltage	DC voltage
Short-circuit protection	0.01 A
Short-circuit tripping current for Ra ≦ 10 mΩ	1 kΩ
Total short-circuit current	Yes
Peak short-circuit current	0.01 V DC analog 10 Bit (value 0 - 1023) digital
Thermal cutout	100 µs
Max. operating frequency with constant resistive load	2 %
Parallel connection of outputs >With resistive load, inductive load with external suppressor circuit, combination within a group	1 %
Parallel connection of outputs >Number of outputs [max.]	each CPU cycle ms
Parallel connection of outputs >Max. total current
Output status indication	8
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Utilization factor	24 V DC
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Duty factor	20.4 - 28.8 V DC
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	5 %
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Utilization factor	Norm./max. 18/32 at signal 0 24/44 at signal 1 mA
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Duty factor	yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	from power supply, inputs to the memory card: yes From the inputs: yes
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Utilization factor	Max. 0.5 A
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Duty factor	5 W
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	< 0.1 mA
Inductive load to EN 60947-5-1 >With external suppressor circuit >Utilization factor	2.5 (signal 0 at external load < 10 MΩ) U = Ue - 1 V (signal 1 at Ie = 0.5 A) V
Inductive load to EN 60947-5-1 >With external suppressor circuit >Duty factor	Yes, electronic (Q1 - Q4), thermal (Q5 - Q8), (analysis via diagnostics input I16, I15)
Inductive load to EN 60947-5-1 >With external suppressor circuit >Max. switching frequency, max. duty factor	0.7 ≦ Ie ≦ 2 per output A
Protection against polarity reversal	16 A
Potential isolation	32 A
Bus termination (first and last station)	Yes
Rated operational current for specified heat dissipation [In]	40000 Operations/h
Heat dissipation per pole, current-dependent [Pvid]	Group 1: Q1 - Q4 Group 2: Q5 - Q8
Equipment heat dissipation, current-dependent [Pvid]	4
Static heat dissipation, non-current-dependent [Pvs]	2 (Caution! Outputs must be actuated simultaneously and for the same length of time.) A
Heat dissipation capacity [Pdiss]	LCD-display
Operating ambient temperature min.	0.25 g
Operating ambient temperature max.	100 % DF
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1500 Operations
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0.25 g
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	100 % DF
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	1500 Operations
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0.25 g
10.2 Strength of materials and parts >10.2.5 Lifting	100 % DF
10.2 Strength of materials and parts >10.2.6 Mechanical impact	1500 Operations
10.2 Strength of materials and parts >10.2.7 Inscriptions	1 g
10.3 Degree of protection of ASSEMBLIES	100 % DF
10.4 Clearances and creepage distances	Depending on the suppressor circuit Operations
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)
10.7 Internal electrical circuits and connections	Yes
10.8 Connections for external conductors
10.9 Insulation properties >10.9.2 Power-frequency electric strength	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
10.9 Insulation properties >10.9.3 Impulse withstand voltage
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	0 A
10.10 Temperature rise	0 W
10.11 Short-circuit rating	0 W
10.12 Electromagnetic compatibility	3.4 W
10.13 Mechanical function	0 W
Contains function building blocks	-25 °C
Contains basic device	+55 °C
Contains module rack
Contains power supply	Meets the product standard´s requirements.
Contains analogue input module	Meets the product standard´s requirements.
Contains analogue output module	Meets the product standard´s requirements.
Contains digital input module	Meets the product standard´s requirements.
Contains digital output module	Meets the product standard´s requirements.
Contains function module	Does not apply, since the entire switchgear needs to be evaluated.
Contains technology module	Does not apply, since the entire switchgear needs to be evaluated.
Contains communication module	Meets the product standard´s requirements.
Contains memory unit	Meets the product standard´s requirements.
Contains simulation module	Meets the product standard´s requirements.
Contains connection cable	Does not apply, since the entire switchgear needs to be evaluated.
Contains control unit	Does not apply, since the entire switchgear needs to be evaluated.
Contains monitor	Is the panel builder´s responsibility.
Contains programming software	Is the panel builder´s responsibility.
Contains engineering software	Is the panel builder´s responsibility.
Contains visualization	Is the panel builder´s responsibility.
Contains libraries	Is the panel builder´s responsibility.
Contains documentation	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Contains other components	Is the panel builder´s responsibility.
Software preinstalled	Is the panel builder´s responsibility.
Product Standards	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
UL File No.
UL Category Control No.
CSA File No.	Yes
CSA Class No.	Yes
North America Certification	No
Specially designed for North America	Yes
Current Limiting Circuit-Breaker	Yes
Degree of Protection	Yes