T3-2-113/E
017676 T3-2-113/E
017676

Açma-Kapama anahtarı, T3, 32 A, gömme montaj, 2 kontak ünitesi/üniteleri, 3 kutuplu, 1 N/K, siyah başparmak kulplu ve ön plakalı
Açma-Kapama anahtarı, Ürün yelpazesi: Açma-Kapama anahtarı, Parça grubu referansı: T3, siyah tutma yeri ve ön plaka ile, 3 kutuplu, Koruma Derecesi: Ön IP65, Tasarım: gömme montaj, Anahtarlama açısı: 90 °, Anahtarlama performansı : bakımlı, ön plaka: 0-1, Motor gücü AC-23A, 50 - 60 Hz 400 V: P = 15 kW, Nominal kesintisiz akım: Iu = 32 A, 2 kontak ünitesi, Standartlar: IEC/EN 60947 , VDE 0660, IEC/EN 60204, CSA, UL, IEC/EN 60947-3'e uygun yük ayırıcı

Product range	On-Off switch
Part group reference	T3
Number of poles	with black thumb grip and front plate
Degree of Protection	3 pole
Design	0 N/O
Contact sequence	1 N/C
Switching angle	Front IP65
Switching performance	flush mounting
Design number
Front plate no.
front plate	90 °
400 V [P]	maintained
Rated uninterrupted current [Iu]	113
Note on rated uninterrupted current !u
Number of contact units	0-1
Standards	15 kW
Climatic proofing	32 A
Ambient temperature >Open	Rated uninterrupted current Iu is specified for max. cross-section.
Ambient temperature >Enclosed	2 contact unit(s)
Overvoltage category/pollution degree	IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL Switch-disconnector according to IEC/EN 60947-3
Rated impulse withstand voltage [Uimp]	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance	-25 - +50 °C
Mounting position	-25 - +40 °C
Mechanical variables >Number of poles	III/3
Mechanical variables >Auxiliary contacts 0 N/O Mechanical variables >Auxiliary contacts 1 N/C Electrical characteristics >Rated operational voltage [Ue]	6000 V AC
Electrical characteristics >Rated uninterrupted current [Iu]	15 g
Electrical characteristics >Note on rated uninterrupted current !u	As required
Load rating with intermittent operation, class 12 >AB 25 % DF	3 pole
Load rating with intermittent operation, class 12 >AB 40 % DF	0 N/O
Load rating with intermittent operation, class 12 >AB 60 % DF	1 N/C
Short-circuit rating >Fuse	690 V AC
Rated short-time withstand current (1 s current) [Icw ]	32 A
Note on rated short-time withstand current lcw	Rated uninterrupted current Iu is specified for max. cross-section.
Rated conditional short-circuit current [Iq]	2 x Ie
cos ϕ rated making capacity as per IEC 60947-3	1.6 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >230 V	1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	35 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	650 Arms
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	Current for a time of 1 second
Safe isolation to EN 61140 >between the contacts	1 kA
Safe isolation to EN 61140 >Current heat loss per contact at Ie	320 A
Safe isolation to EN 61140 >Current heat loss per auxiliary circuit at Ie (AC-15/230 V)	260 A
Lifespan, mechanical [Operations]	260 A
Maximum operating frequency [Operations/h]	240 A
AC >AC-3 >Rating, motor load switch [P] >220 V 230 V [P]	170 A
AC >AC-3 >Rating, motor load switch [P] >230 V Star-delta [P]	440 V AC
AC >AC-3 >Rating, motor load switch [P] >400 V 415 V [P]	1.1 W
AC >AC-3 >Rating, motor load switch [P] >400 V Star-delta [P]	1.1 CO
AC >AC-3 >Rating, motor load switch [P] >500 V [P]	> 0.5 x 106
AC >AC-3 >Rating, motor load switch [P] >500 V Star-delta [P]	1200
AC >AC-3 >Rating, motor load switch [P] >690 V [P]	5.5 kW
AC >AC-3 >Rating, motor load switch [P] >690 V Star-delta [P]	7.5 kW
AC >AC-3 >Rated operational current motor load switch >230 V [Ie]	11 kW
AC >AC-3 >Rated operational current motor load switch >230 V star-delta [Ie]	15 kW
AC >AC-3 >Rated operational current motor load switch >400V 415 V [Ie]	15 kW
AC >AC-3 >Rated operational current motor load switch >400 V star-delta [Ie]	18.5 kW
AC >AC-3 >Rated operational current motor load switch >500 V [Ie ]	11 kW
AC >AC-3 >Rated operational current motor load switch >500 V star-delta [Ie ]	22 kW
AC >AC-3 >Rated operational current motor load switch >690 V [Ie]	23.7 A
AC >AC-3 >Rated operational current motor load switch >690 V star-delta [Ie]	32 A
AC >AC-21A >Rated operational current switch >440 V [Ie]	23.7 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >230 V [P]	32 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	23.7 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	32 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	14.7 A
AC >AC-23A >Rated operational current motor load switch >230 V [Ie]	25.5 A
AC >AC-23A >Rated operational current motor load switch >400 V 415 V [Ie]	32 A
AC >AC-23A >Rated operational current motor load switch >500 V [Ie]	7.5 kW
AC >AC-23A >Rated operational current motor load switch >690 V [Ie]	15 kW
DC >DC-1, Load-break switches L/R = 1 ms >Rated operational current [Ie]	15 kW
DC >DC-1, Load-break switches L/R = 1 ms >Voltage per contact pair in series	15 kW
DC >DC-21A [Ie ] >Rated operational current [Ie]	32 A
DC >DC-21A [Ie ] >Contacts	32 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Rated operational current [Ie]	26.4 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Contacts	17 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Rated operational current [Ie]	25 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Contacts	60 V
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Rated operational current [Ie]	1 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Contacts	1 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Rated operational current [Ie]	25 A
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Contacts	1 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >240 V >Rated operational current [Ie]	25 A
DC >DC-23A, motor load switch L/R = 15 ms >240 V >Contacts	2 Quantity
DC >DC-13, Control switches L/R = 50 ms >Rated operational current [Ie]	25 A
DC >DC-13, Control switches L/R = 50 ms >Voltage per contact pair in series	3 Quantity
Control circuit reliability at 24 V DC, 10 mA [Fault probability]	12 A
Solid or stranded	3 Quantity
Flexible with ferrules to DIN 46228	5 A
Terminal screw	5 Quantity
Tightening torque for terminal screw	20 A
Notes	24 V
Contacts >Rated operational voltage [Ue]	< 10 -5, < 1 fault in 100000 operations HF
Contacts >Rated uninterrupted current max. >Main conducting paths >General use	1 x (1 - 6) 2 x (1 - 6) mm2
Contacts >Rated uninterrupted current max. >Auxiliary contacts >General Use [IU]	1 x (0.75 - 4) 2 x (0.75 - 4) mm2
Contacts >Rated uninterrupted current max. >Auxiliary contacts >Pilot Duty	M4
Switching capacity >Maximum motor rating >Single-phase >120 V AC	1.6 Nm
Switching capacity >Maximum motor rating >Single-phase >200 V AC	B10d values as per EN ISO 13849-1, table C1
Switching capacity >Maximum motor rating >Single-phase >240 V AC	600 V AC
Switching capacity >Maximum motor rating >Three-phase >200 V AC	25 A
Switching capacity >Maximum motor rating >Three-phase >240 V AC	10 A
Switching capacity >Maximum motor rating >Three-phase >480 V AC	A 600 P 600
Switching capacity >Maximum motor rating >Three-phase >600 V AC	1.5 HP
Short Circuit Current Rating >Basic Rating	3 HP
Short Circuit Current Rating >max. Fuse	3 HP
Short Circuit Current Rating >High fault rating	3 HP
Short Circuit Current Rating >max. Fuse	3 HP
Terminal capacity >Solid or flexible conductor with ferrule	7.5 HP
Terminal capacity >Terminal screw	10 HP
Terminal capacity >Tightening torque	5 kA
Rated operational current for specified heat dissipation [In]	40 A
Heat dissipation per pole, current-dependent [Pvid]	10 kA
Equipment heat dissipation, current-dependent [Pvid]	40, Class J A
Static heat dissipation, non-current-dependent [Pvs]	14 - 10 AWG
Heat dissipation capacity [Pdiss]	M4
Operating ambient temperature min.	17.7 lb-in
Operating ambient temperature max.	32 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1.1 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	-25 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+50 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	UV resistance only in connection with protective shield.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	Is the panel builder´s responsibility.
Version as safety switch	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as emergency stop installation	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as reversing switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Max. rated operation voltage Ue AC	No
Rated operating voltage	No
Rated permanent current Iu	No
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	No
Rated operation power at AC-3, 400 V	1
Rated short-time withstand current lcw	690 V
Rated operation power at AC-23, 400 V	690 - 690 V
Switching power at 400 V	32 A
Conditioned rated short-circuit current Iq	32 A
Number of poles	32 A
Number of auxiliary contacts as normally closed contact	11 kW
Number of auxiliary contacts as normally open contact	0.65 kA
Number of auxiliary contacts as change-over contact	15 kW
Motor drive optional	15 kW
Motor drive integrated	1 kA
Voltage release optional	3
Device construction	1
Suitable for ground mounting	0
Suitable for front mounting 4-hole	0
Suitable for front mounting centre	No
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	Built-in device fixed built-in technique
Type of control element	No
Interlockable	Yes
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	No
Product Standards	Black
UL File No.	Toggle
UL Category Control No.	No
CSA File No.	Screw connection
CSA Class No.	IP65
North America Certification	12
Suitable for	UL 60947-4-1;CSA - C22.2 No. 60947-4-1-14; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking
Degree of Protection	E36332

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.