Eaton-T0-4-15682/I2H/MBS/SVB
182435 T0-4-15682/I2H/MBS/SVB

Ana şalter, T0, 20 A, yüzeye montaj, 4 kontak ünitesi, 6 kutuplu, 1 N/A, 1 N/C, Acil durum kapatma fonksiyonu, 0 (Kapalı) konumunda kilitlenebilir, sert kilitlemeli versiyon, ile montaj sayfası ekranı
Ana şalter, Ürün yelpazesi: Ana şalter, bakım şalteri, Onarım şalteri, Parça grubu referansı: T0, Durdurma Fonksiyonu: Acil durum kapatma fonksiyonu, Kırmızı döner kollu ve sarı kilitleme halkalı, Notlar: sert montajlı versiyon, montaj sayfası ekranlı, 6 kutup, Kilitleme özelliği: 0 (Kapalı) konumda kilitlenebilir, Koruma Derecesi: IP65, Tasarım: yüzeye montaj, Anahtarlama açısı: 90 °, Motor gücü AC-23A, 50 - 60 Hz 400 V: P = 5,5 kW, Nominal kesintisiz akım: Iu = 20 A, 4 kontak ünitesi, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, IEC/EN 60947-3'e uygun yük ayırıcı

Product range	Main switch maintenance switch Repair switch
Part group reference	T0
Stop Function	Emergency switching off function
Notes	With red rotary handle and yellow locking ring
Number of poles	hard knockout version with assembly sheet screen
Locking facility	6 pole
Degree of Protection	1 N/O
Design	1 N/C
Contact sequence	Lockable in the 0 (Off) position
Switching angle	IP65
Function
400 V [P]	surface mounting
Rated uninterrupted current [Iu]
Note on rated uninterrupted current !u
Number of contact units	90 °
Standards
Climatic proofing	5.5 kW
Ambient temperature >Enclosed	20 A
Overvoltage category/pollution degree	Rated uninterrupted current Iu is specified for max. cross-section.
Rated impulse withstand voltage [Uimp]	4 contact unit(s)
Mechanical shock resistance	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch-disconnector according to IEC/EN 60947-3
Mounting position	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical variables >Number of poles	-20 - +40 °C
Mechanical variables >Auxiliary contacts 1 N/O Mechanical variables >Auxiliary contacts 1 N/C Electrical characteristics >Rated operational voltage [Ue]	III/3
Electrical characteristics >Rated uninterrupted current [Iu]	6000 V AC
Electrical characteristics >Note on rated uninterrupted current !u	15 g
Load rating with intermittent operation, class 12 >AB 25 % DF	As required
Load rating with intermittent operation, class 12 >AB 40 % DF	6 pole
Load rating with intermittent operation, class 12 >AB 60 % DF	1 N/O
Short-circuit rating >Fuse	1 N/C
Rated short-time withstand current (1 s current) [Icw ]	690 V AC
Note on rated short-time withstand current lcw	20 A
Rated conditional short-circuit current [Iq]	Rated uninterrupted current Iu is specified for max. cross-section.
cos ϕ rated making capacity as per IEC 60947-3	2 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >230 V	1.6 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	20 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	320 Arms
Safe isolation to EN 61140 >between the contacts	Current for a time of 1 second
Safe isolation to EN 61140 >Current heat loss per contact at Ie	6 kA
Safe isolation to EN 61140 >Current heat loss per auxiliary circuit at Ie (AC-15/230 V)	130 A
Lifespan, mechanical [Operations]	100 A
Maximum operating frequency [Operations/h]	110 A
AC >AC-3 >Rating, motor load switch [P] >220 V 230 V [P]	80 A
AC >AC-3 >Rating, motor load switch [P] >230 V Star-delta [P]	60 A
AC >AC-3 >Rating, motor load switch [P] >400 V 415 V [P]	440 V AC
AC >AC-3 >Rating, motor load switch [P] >400 V Star-delta [P]	0.6 W
AC >AC-3 >Rating, motor load switch [P] >500 V [P]	0.6 CO
AC >AC-3 >Rating, motor load switch [P] >500 V Star-delta [P]	> 0.4 x 106
AC >AC-3 >Rating, motor load switch [P] >690 V [P]	1200
AC >AC-3 >Rating, motor load switch [P] >690 V Star-delta [P]	3 kW
AC >AC-3 >Rated operational current motor load switch >230 V [Ie]	5.5 kW
AC >AC-3 >Rated operational current motor load switch >230 V star-delta [Ie]	5.5 kW
AC >AC-3 >Rated operational current motor load switch >400V 415 V [Ie]	7.5 kW
AC >AC-3 >Rated operational current motor load switch >400 V star-delta [Ie]	5.5 kW
AC >AC-3 >Rated operational current motor load switch >500 V [Ie ]	7.5 kW
AC >AC-3 >Rated operational current motor load switch >500 V star-delta [Ie ]	4 kW
AC >AC-3 >Rated operational current motor load switch >690 V [Ie]	5.5 kW
AC >AC-3 >Rated operational current motor load switch >690 V star-delta [Ie]	11.5 A
AC >AC-21A >Rated operational current switch >440 V [Ie]	20 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >230 V [P]	11.5 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	20 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	9 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	15.6 A
AC >AC-23A >Rated operational current motor load switch >230 V [Ie]	4.9 A
AC >AC-23A >Rated operational current motor load switch >400 V 415 V [Ie]	8.5 A
AC >AC-23A >Rated operational current motor load switch >500 V [Ie]	20 A
AC >AC-23A >Rated operational current motor load switch >690 V [Ie]	3 kW
DC >DC-1, Load-break switches L/R = 1 ms >Rated operational current [Ie]	5.5 kW
DC >DC-1, Load-break switches L/R = 1 ms >Voltage per contact pair in series	7.5 kW
DC >DC-21A [Ie ] >Rated operational current [Ie]	5.5 kW
DC >DC-21A [Ie ] >Contacts	13.3 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Rated operational current [Ie]	13.3 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Contacts	13.3 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Rated operational current [Ie]	7.6 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Contacts	10 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Rated operational current [Ie]	60 V
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Contacts	1 A
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Rated operational current [Ie]	1 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Contacts	10 A
DC >DC-23A, motor load switch L/R = 15 ms >240 V >Rated operational current [Ie]	1 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >240 V >Contacts	10 A
DC >DC-13, Control switches L/R = 50 ms >Rated operational current [Ie]	2 Quantity
DC >DC-13, Control switches L/R = 50 ms >Voltage per contact pair in series	10 A
Control circuit reliability at 24 V DC, 10 mA [Fault probability]	3 Quantity
Solid or stranded	5 A
Flexible with ferrules to DIN 46228	3 Quantity
Terminal screw	5 A
Tightening torque for terminal screw	5 Quantity
Notes	10 A
Terminal capacity >Terminal screw	32 V
Rated operational current for specified heat dissipation [In]	< 10 -5, < 1 fault in 100000 operations HF
Heat dissipation per pole, current-dependent [Pvid]	1 x (1 - 2,5) 2 x (1 - 2,5) mm2
Equipment heat dissipation, current-dependent [Pvid]	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Static heat dissipation, non-current-dependent [Pvs]	M3.5
Heat dissipation capacity [Pdiss]	1 Nm
Operating ambient temperature min.	B10d values as per EN ISO 13849-1, table C1
Operating ambient temperature max.	M3.5
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	20 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0.6 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	-25 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	+40 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	UV resistance only in connection with protective shield.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	Is the panel builder´s responsibility.
Version as safety switch	Is the panel builder´s responsibility.
Version as emergency stop installation	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as reversing switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Max. rated operation voltage Ue AC	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operating voltage	Yes
Rated permanent current Iu	Yes
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	Yes
Rated operation power at AC-3, 400 V	No
Rated short-time withstand current lcw	1
Rated operation power at AC-23, 400 V	690 V
Switching power at 400 V	690 - 690 V
Conditioned rated short-circuit current Iq	20 A
Number of poles	13.3 A
Number of auxiliary contacts as normally closed contact	20 A
Number of auxiliary contacts as normally open contact	5.5 kW
Number of auxiliary contacts as change-over contact	0.32 kA
Motor drive optional	5.5 kW
Motor drive integrated	5.5 kW
Voltage release optional	6 kA
Device construction	6
Suitable for ground mounting	1
Suitable for front mounting 4-hole	1
Suitable for front mounting centre	0
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	No
Type of control element	Complete device in housing
Interlockable	Yes
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.