alt
alt

T0-2-113/EA/SVB-SW
007952 T0-2-113/EA/SVB-SW
007952

Ana şalter, T0, 20 A, sıva altı montaj, 2 kontak ünitesi, 3 kutuplu, 1 N/C, STOP fonksiyonu, Siyah döner kollu ve kilitleme halkalı Ana şalter, Ürün yelpazesi: Ana şalter, bakım şalteri, Onarım şalteri, Parça grubu referansı: T0, Durdurma Fonksiyonu: STOP fonksiyonu, Siyah döner kollu ve kilitleme halkalı, 3 kutuplu, Koruma Derecesi: Önden IP65, Tasarım: Sıva altı montaj, Anahtarlama açısı: 90 °, Motor değeri AC-23A, 50 - 60 Hz 400 V: P = 5,5 kW, Nominal kesintisiz akım: Iu = 20 A, 2 kontak ünitesi/ünitesi, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL, IEC/EN 60947-3'e uygun yük ayırıcı

Ana şalter, T0, 20 A, sıva altı montaj, 2 kontak ünitesi, 3 kutuplu, 1 N/C, STOP fonksiyonu, Siyah döner kollu ve kilitleme halkalı
Ana şalter, Ürün yelpazesi: Ana şalter, bakım şalteri, Onarım şalteri, Parça grubu referansı: T0, Durdurma Fonksiyonu: STOP fonksiyonu, Siyah döner kollu ve kilitleme halkalı, 3 kutuplu, Koruma Derecesi: Önden IP65, Tasarım: Sıva altı montaj, Anahtarlama açısı: 90 °, Motor değeri AC-23A, 50 - 60 Hz 400 V: P = 5,5 kW, Nominal kesintisiz akım: Iu = 20 A, 2 kontak ünitesi/ünitesi, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL, IEC/EN 60947-3'e uygun yük ayırıcı

Product range Main switch
maintenance switch
Repair switch
Part group reference T0
Stop Function STOP function
Number of poles With black rotary handle and locking ring
Degree of Protection 3 pole
Design 0 N/O
Contact sequence 1 N/C
Switching angle Front IP65
Design number flush mounting
Function 000Z427
400 V [P] 1150SWI-64
Rated uninterrupted current [Iu] 90 °
Note on rated uninterrupted current !u 113
Number of contact units 1150SPC-194
Standards 5.5 kW
Climatic proofing 20 A
Ambient temperature
>Open
Rated uninterrupted current Iu is specified for max. cross-section.
Ambient temperature
>Enclosed
2 contact unit(s)
Overvoltage category/pollution degree IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL
Switch-disconnector according to IEC/EN 60947-3
Rated impulse withstand voltage [Uimp] Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance -25 - +50 °C
Mounting position -25 - +40 °C
Mechanical variables
>Number of poles
III/3
Mechanical variables
>Auxiliary contacts
0 N/O
Mechanical variables
>Auxiliary contacts
1 N/C
Electrical characteristics
>Rated operational voltage [Ue]
6000 V AC
Electrical characteristics
>Rated uninterrupted current [Iu]
15 g
Electrical characteristics
>Note on rated uninterrupted current !u
As required
Load rating with intermittent operation, class 12
>AB 25 % DF
3 pole
Load rating with intermittent operation, class 12
>AB 40 % DF
0 N/O
Load rating with intermittent operation, class 12
>AB 60 % DF
1 N/C
Short-circuit rating
>Fuse
690 V AC
Rated short-time withstand current (1 s current) [Icw ] 20 A
Note on rated short-time withstand current lcw Rated uninterrupted current Iu is specified for max. cross-section.
Rated conditional short-circuit current [Iq] 2 x Ie
cos ϕ rated making capacity as per IEC 60947-3 1.6 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3
>230 V
1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3
>400/415 V
20 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3
>500 V
320 Arms
Rated breaking capacity cos ϕ to IEC 60947-3
>690 V
Current for a time of 1 second
Safe isolation to EN 61140
>between the contacts
6 kA
Safe isolation to EN 61140
>Current heat loss per contact at Ie
130 A
Safe isolation to EN 61140
>Current heat loss per auxiliary circuit at Ie (AC-15/230 V)
100 A
Lifespan, mechanical [Operations] 110 A
Maximum operating frequency [Operations/h] 80 A
AC
>AC-3
>Rating, motor load switch [P]
>220 V 230 V [P]
60 A
AC
>AC-3
>Rating, motor load switch [P]
>230 V Star-delta [P]
440 V AC
AC
>AC-3
>Rating, motor load switch [P]
>400 V 415 V [P]
0.6 W
AC
>AC-3
>Rating, motor load switch [P]
>400 V Star-delta [P]
0.6 CO
AC
>AC-3
>Rating, motor load switch [P]
>500 V [P]
> 0.4 x 106
AC
>AC-3
>Rating, motor load switch [P]
>500 V Star-delta [P]
1200
AC
>AC-3
>Rating, motor load switch [P]
>690 V [P]
3 kW
AC
>AC-3
>Rating, motor load switch [P]
>690 V Star-delta [P]
5.5 kW
AC
>AC-3
>Rated operational current motor load switch
>230 V [Ie]
5.5 kW
AC
>AC-3
>Rated operational current motor load switch
>230 V star-delta [Ie]
7.5 kW
AC
>AC-3
>Rated operational current motor load switch
>400V 415 V [Ie]
5.5 kW
AC
>AC-3
>Rated operational current motor load switch
>400 V star-delta [Ie]
7.5 kW
AC
>AC-3
>Rated operational current motor load switch
>500 V [Ie ]
4 kW
AC
>AC-3
>Rated operational current motor load switch
>500 V star-delta [Ie ]
5.5 kW
AC
>AC-3
>Rated operational current motor load switch
>690 V [Ie]
11.5 A
AC
>AC-3
>Rated operational current motor load switch
>690 V star-delta [Ie]
20 A
AC
>AC-21A
>Rated operational current switch
>440 V [Ie]
11.5 A
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>230 V [P]
20 A
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>400 V 415 V [P]
9 A
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>500 V [P]
15.6 A
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>690 V [P]
4.9 A
AC
>AC-23A
>Rated operational current motor load switch
>230 V [Ie]
8.5 A
AC
>AC-23A
>Rated operational current motor load switch
>400 V 415 V [Ie]
20 A
AC
>AC-23A
>Rated operational current motor load switch
>500 V [Ie]
3 kW
AC
>AC-23A
>Rated operational current motor load switch
>690 V [Ie]
5.5 kW
DC
>DC-1, Load-break switches L/R = 1 ms
>Rated operational current [Ie]
7.5 kW
DC
>DC-1, Load-break switches L/R = 1 ms
>Voltage per contact pair in series
5.5 kW
DC
>DC-21A [Ie ]
>Rated operational current [Ie]
13.3 A
DC
>DC-21A [Ie ]
>Contacts
13.3 A
DC
>DC-23A, motor load switch L/R = 15 ms
>24 V
>Rated operational current [Ie]
13.3 A
DC
>DC-23A, motor load switch L/R = 15 ms
>24 V
>Contacts
7.6 A
DC
>DC-23A, motor load switch L/R = 15 ms
>48 V
>Rated operational current [Ie]
10 A
DC
>DC-23A, motor load switch L/R = 15 ms
>48 V
>Contacts
60 V
DC
>DC-23A, motor load switch L/R = 15 ms
>60 V
>Rated operational current [Ie]
1 A
DC
>DC-23A, motor load switch L/R = 15 ms
>60 V
>Contacts
1 Quantity
DC
>DC-23A, motor load switch L/R = 15 ms
>120 V
>Rated operational current [Ie]
10 A
DC
>DC-23A, motor load switch L/R = 15 ms
>120 V
>Contacts
1 Quantity
DC
>DC-23A, motor load switch L/R = 15 ms
>240 V
>Rated operational current [Ie]
10 A
DC
>DC-23A, motor load switch L/R = 15 ms
>240 V
>Contacts
2 Quantity
DC
>DC-13, Control switches L/R = 50 ms
>Rated operational current [Ie]
10 A
DC
>DC-13, Control switches L/R = 50 ms
>Voltage per contact pair in series
3 Quantity
Control circuit reliability at 24 V DC, 10 mA [Fault probability] 5 A
Solid or stranded 3 Quantity
Flexible with ferrules to DIN 46228 5 A
Terminal screw 5 Quantity
Tightening torque for terminal screw 10 A
Notes 32 V
Contacts
>Rated operational voltage [Ue]
< 10 -5, < 1 fault in 100000 operations HF
Contacts
>Rated uninterrupted current max.
>Main conducting paths
>General use
1 x (1 - 2,5)
2 x (1 - 2,5) mm2
Contacts
>Rated uninterrupted current max.
>Auxiliary contacts
>General Use [IU]
1 x (0.75 - 2.5)
2 x (0.75 - 2.5) mm2
Contacts
>Rated uninterrupted current max.
>Auxiliary contacts
>Pilot Duty
M3.5
Switching capacity
>Maximum motor rating
>Single-phase
>120 V AC
1 Nm
Switching capacity
>Maximum motor rating
>Single-phase
>200 V AC
B10d values as per EN ISO 13849-1, table C1
Switching capacity
>Maximum motor rating
>Single-phase
>240 V AC
600 V AC
Switching capacity
>Maximum motor rating
>Three-phase
>200 V AC
16 A
Switching capacity
>Maximum motor rating
>Three-phase
>240 V AC
10 A
Switching capacity
>Maximum motor rating
>Three-phase
>480 V AC
A 600
P 600
Switching capacity
>Maximum motor rating
>Three-phase
>600 V AC
0.5 HP
Short Circuit Current Rating
>Basic Rating
1 HP
Short Circuit Current Rating
>max. Fuse
1.5 HP
Short Circuit Current Rating
>High fault rating
3 HP
Short Circuit Current Rating
>max. Fuse
3 HP
Terminal capacity
>Solid or flexible conductor with ferrule
7.5 HP
Terminal capacity
>Terminal screw
7.5 HP
Terminal capacity
>Tightening torque
5 kA
Rated operational current for specified heat dissipation [In] 50 A
Heat dissipation per pole, current-dependent [Pvid] 10 kA
Equipment heat dissipation, current-dependent [Pvid] 20, Class J A
Static heat dissipation, non-current-dependent [Pvs] 18 - 14 AWG
Heat dissipation capacity [Pdiss] M3.5
Operating ambient temperature min. 8.8 lb-in
Operating ambient temperature max. 20 A
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
0.6 W
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
0 W
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
0 W
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
0 W
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
-25 °C
10.2 Strength of materials and parts
>10.2.5 Lifting
+50 °C
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock UV resistance only in connection with protective shield.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function Is the panel builder´s responsibility.
Version as main switch Is the panel builder´s responsibility.
Version as maintenance-/service switch Is the panel builder´s responsibility.
Version as safety switch The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as emergency stop installation Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as reversing switch Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Max. rated operation voltage Ue AC Yes
Rated operating voltage Yes
Rated permanent current Iu No
Rated permanent current at AC-23, 400 V No
Rated permanent current at AC-21, 400 V No
Rated operation power at AC-3, 400 V 1
Rated short-time withstand current lcw 690 V
Rated operation power at AC-23, 400 V 690 - 690 V
Switching power at 400 V 20 A
Conditioned rated short-circuit current Iq 13.3 A
Number of poles 20 A
Number of auxiliary contacts as normally closed contact 5.5 kW
Number of auxiliary contacts as normally open contact 0.32 kA
Number of auxiliary contacts as change-over contact 5.5 kW
Motor drive optional 5.5 kW
Motor drive integrated 6 kA
Voltage release optional 3
Device construction 1
Suitable for ground mounting 0
Suitable for front mounting 4-hole 0
Suitable for front mounting centre No
Suitable for distribution board installation No
Suitable for intermediate mounting No
Colour control element Built-in device fixed built-in technique
Type of control element No
Interlockable No
Type of electrical connection of main circuit Yes
Degree of protection (IP), front side No
Degree of protection (NEMA) No
Product Standards Black
UL File No. Door coupling rotary drive
UL Category Control No. Yes
CSA File No. Screw connection
CSA Class No. IP65
North America Certification 12
Suitable for UL 60947-4-1;CSA - C22.2 No. 60947-4-1-14; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking
Degree of Protection E36332

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

T5-7-SOND*/V/SVB
Eaton
T5-6-SOND*/V/SVB
Eaton
T5-7-SOND*/EA/SVB
Eaton
T5-6-SOND*/EA/SVB
Eaton
T5-5-SOND*/EA/SVB
Eaton
T5B-8-SOND*/Z
Eaton
T5B-7-SOND*/Z
Eaton
T5B-4-SOND*/EA/SVB
Eaton
T5B-3-SOND*/EA/SVB
Eaton
T5B-2-SOND*/EA/SVB
Eaton
T5B-1-SOND*/E
Eaton
T3-11-SOND*/Z
Eaton