alt
alt

PKE65/XTUCP-65
168974 PKE65/XTUCP-65
168974

Sistem koruyucu devre kesici, Standart düğmeli komple cihaz, 30 - 65 A, 65 A, Aşırı yük bırakmalı Sistem koruyucu devre kesici standardı dahil. 30-65A geniş aralıklı aşırı yük korumasına ve 150-520A ayarlanabilir kısa devre korumasına sahip takılabilir/değiştirilebilir açma bloğu.

Sistem koruyucu devre kesici, Standart düğmeli komple cihaz, 30 - 65 A, 65 A, Aşırı yük bırakmalı
Sistem koruyucu devre kesici standardı dahil. 30-65A geniş aralıklı aşırı yük korumasına ve 150-520A ayarlanabilir kısa devre korumasına sahip takılabilir/değiştirilebilir açma bloğu.

Product range Circuit-breakers PKE up to 65 A
Basic function System protection
Line and cable protection
Single unit/Complete unit Complete device with standard knob
Connection technique Screw terminals
Setting range of overload releases [Ir] 30 - 65 A
Function With overload release
Rated uninterrupted current = rated operational current [Iu = Ie ] 65 A
Standards
Climatic proofing IEC/EN 60947, VDE 0660
Ambient temperature
>Storage
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
>Open
- 40 - 80 °C
Ambient temperature
>Enclosed
-25 - +55 °C
Mounting position - 25 - 40 °C
Direction of incoming supply 1210DRW-287
Degree of protection
>Device
as required
Degree of protection
>Terminations
IP20
Protection against direct contact when actuated from front (EN 50274) IP00
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27 Finger and back-of-hand proof
Altitude 15 g
Terminal capacity main cable
>Screw terminals
>Solid
Max. 2000 m
Terminal capacity main cable
>Screw terminals
>Flexible with ferrule to DIN 46228
1 x (0.75 - 16)
2 x (0.75 - 16) mm2
Terminal capacity main cable
>Screw terminals
>Stripping length
1 x (0.75 - 35)
2 x (0.75 - 25) mm2
Specified tightening torque for terminal screws
>Main cable
14 mm
Specified tightening torque for terminal screws
>Control circuit cables
3.3 Nm
Rated impulse withstand voltage [Uimp] 1 Nm
Overvoltage category/pollution degree
Rated operational voltage [Ue ] 6000 V AC
Rated uninterrupted current = rated operational current [Iu = Ie ] III/3
Rated frequency [f] 690 V AC
Current heat loss (3 pole at operating temperature) 65 A
Lifespan, mechanical [Operations] 40 - 60 Hz
Lifespan, electrical (AC-3 at 400 V)
>Lifespan, electrical [Operations]
21.6 W
Max. operating frequency 0.05 x 106
AC-4 cycle operation
>Minimum current flow times
0.05 x 106
AC-4 cycle operation
>Minimum cut-out periods
60 Ops/h
AC-4 cycle operation
>Note
500 (Class 5)
700 (Class 10)
900 (Class 15)
1000 (Class 20) ms
Temperature compensation
>to IEC/EN 60947, VDE 0660
500 ms
Temperature compensation
>Operating range
In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor).
For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
Setting range of overload releases
short-circuit release - 5…40 °C
Short-circuit release tolerance - 25…55 °C
Phase-failure sensitivity 0.42 - 1 x Iu
Rated operational current for specified heat dissipation [In] Basic device, fixed: 15.5 x Iu
Trip block, adjustable: 5 - 8 x Ir
delayed approx. 60 ms
Heat dissipation per pole, current-dependent [Pvid] ± 20%
Equipment heat dissipation, current-dependent [Pvid] no (with PKE-XTU(A)CP-...)
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss] 65 A
Operating ambient temperature min. 7.2 W
Operating ambient temperature max. 21.6 W
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
0 W
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
0 W
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
-25 °C
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
+55 °C
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
10.2 Strength of materials and parts
>10.2.5 Lifting
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Meets the product standard´s requirements.
10.8 Connections for external conductors Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise Is the panel builder´s responsibility.
10.11 Short-circuit rating Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function Is the panel builder´s responsibility.
Rated permanent current Iu Is the panel builder´s responsibility.
Rated voltage The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Overload release current setting Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Adjustment range short-term delayed short-circuit release The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Adjustment range undelayed short-circuit release
Integrated earth fault protection
Type of electrical connection of main circuit 65 A
Device construction 690 - 690 V
Suitable for DIN rail (top hat rail) mounting 50 kA
DIN rail (top hat rail) mounting optional 30 - 65 A
Number of auxiliary contacts as normally closed contact 150 - 150 A
Number of auxiliary contacts as normally open contact 1008 - 1008 A
Number of auxiliary contacts as change-over contact No
With switched-off indicator Screw connection
With under voltage release Other
Number of poles Yes
Position of connection for main current circuit Yes
Type of control element 0
Complete device with protection unit 0
Motor drive integrated 0
Motor drive optional No
Degree of protection (IP) No
Specially designed for North America 3
Characteristic curve Other
Characteristic curve Turn button
Characteristic curve Yes

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

PKE32/XTUCP-36
Eaton
EMT6-DB(230V)
Eaton
PKE65/XTUWCP-36
Eaton
PKE65/XTUCP-65
Eaton
MSC-D-16-M15(230V50HZ)
Eaton
MSC-D-16-M15(24VDC)
Eaton
MSC-D-10-M17(230V50HZ)
Eaton
MSC-D-12-M17(230V50HZ)
Eaton