P3-63/XM
172836 P3-63/XM
172836

Ana şalter, P3, 63 A, arkadan montajlı, 3 kutuplu
Ana şalter, Ürün yelpazesi: Ana şalter, bakım şalteri, Onarım şalteri, Parça grubu referansı: P3, Notlar: Kol SVB(-SW)-P3/M (172841; 172843) yalnızca P1/P3-400 uzatma miliyle kullanım içindir ( 172844)., Sağlanan ekipmana ilişkin bilgiler: Kullanıcı tarafından takılan yardımcı kontak veya nötr iletken., 3 kutuplu, Koruma Derecesi: Önden IP65, Tasarım: arkadan montaj, Motor gücü AC-23A, 50 - 60 Hz 400 V: P = 30 kW, Nominal kesintisiz akım: Iu = 63 A, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, IEC/EN 60947-3'e uygun yük ayırıcı

Product range	Main switch maintenance switch Repair switch
Part group reference	P3
Notes	Handle SVB(-SW)-P3/M (172841; 172843) only for use with extension shaft P1/P3-400 (172844).
Information about equipment supplied	Auxiliary contact or neutral conductor fitted by user.
Number of poles	3 pole
Degree of Protection	0 N/O
Design	0 N/C
Contact sequence	Front IP65
Front plate no.	rear mounting
400 V [P]
Rated uninterrupted current [Iu]
Note on rated uninterrupted current !u
Standards	30 kW
Climatic proofing	63 A
Ambient temperature >Open	Rated uninterrupted current Iu is specified for max. cross-section.
Ambient temperature >Enclosed	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch-disconnector according to IEC/EN 60947-3
Overvoltage category/pollution degree	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Rated impulse withstand voltage [Uimp]	-25 - +50 °C
Mechanical shock resistance	-25 - +40 °C
Mounting position	III/3
Mechanical variables >Number of poles	6000 V AC
Mechanical variables >Auxiliary contacts 0 N/O Mechanical variables >Auxiliary contacts 0 N/C Electrical characteristics >Rated operational voltage [Ue]	15 g
Electrical characteristics >Rated uninterrupted current [Iu]	As required
Electrical characteristics >Note on rated uninterrupted current !u	3 pole
Load rating with intermittent operation, class 12 >AB 25 % DF	0 N/O
Load rating with intermittent operation, class 12 >AB 40 % DF	0 N/C
Load rating with intermittent operation, class 12 >AB 60 % DF	690 V AC
Short-circuit rating >Fuse	63 A
Rated short-time withstand current (1 s current) [Icw ]	Rated uninterrupted current Iu is specified for max. cross-section.
Note on rated short-time withstand current lcw	2 x Ie
Rated conditional short-circuit current [Iq]	1.6 x Ie
cos ϕ rated making capacity as per IEC 60947-3	1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >230 V	80 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	1260 Arms
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	Current for a time of 1 second
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	4 kA
Safe isolation to EN 61140 >between the contacts	800 A
Safe isolation to EN 61140 >Current heat loss per contact at Ie	640 A
Lifespan, mechanical [Operations]	600 A
Maximum operating frequency [Operations/h]	590 A
AC >AC-3 >Rating, motor load switch [P] >220 V 230 V [P]	340 A
AC >AC-3 >Rating, motor load switch [P] >400 V 415 V [P]	440 V AC
AC >AC-3 >Rating, motor load switch [P] >500 V [P]	4.5 W
AC >AC-3 >Rating, motor load switch [P] >690 V [P]	> 0.1 x 106
AC >AC-3 >Rated operational current motor load switch >230 V [Ie]	1200
AC >AC-3 >Rated operational current motor load switch >400V 415 V [Ie]	15 kW
AC >AC-3 >Rated operational current motor load switch >500 V [Ie ]	30 kW
AC >AC-3 >Rated operational current motor load switch >690 V [Ie]	30 kW
AC >AC-21A >Rated operational current switch >440 V [Ie]	30 kW
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >230 V [P]	51 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	55 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	44 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	22.1 A
AC >AC-23A >Rated operational current motor load switch >230 V [Ie]	63 A
AC >AC-23A >Rated operational current motor load switch >400 V 415 V [Ie]	18.5 kW
AC >AC-23A >Rated operational current motor load switch >500 V [Ie]	30 kW
AC >AC-23A >Rated operational current motor load switch >690 V [Ie]	45 kW
DC >DC-1, Load-break switches L/R = 1 ms >Rated operational current [Ie]	55 kW
DC >DC-1, Load-break switches L/R = 1 ms >Voltage per contact pair in series	63 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Rated operational current [Ie]	63 A
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Contacts	63 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Rated operational current [Ie]	63 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Contacts	63 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Rated operational current [Ie]	60 V
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Contacts	50 A
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Rated operational current [Ie]	1 Quantity
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Contacts	50 A
Control circuit reliability at 24 V DC, 10 mA [Fault probability]	2 Quantity
Solid or stranded	50 A
Flexible with ferrules to DIN 46228	2 Quantity
Terminal screw	25 A
Tightening torque for terminal screw	3 Quantity
Notes	< 10 -5, < 1 fault in 100000 operations HF
Contacts >Rated operational voltage [Ue]	1 x (2,5 - 35) 2 x (2,5 - 10) mm2
Contacts >Rated uninterrupted current max. >Main conducting paths >General use	1 x (1.5 - 25) 2 x (1.5 - 6) mm2
Contacts >Rated uninterrupted current max. >Auxiliary contacts >General Use [IU]	M5
Contacts >Rated uninterrupted current max. >Auxiliary contacts >Pilot Duty	3 Nm
Switching capacity >Maximum motor rating >Single-phase >120 V AC	B10d values as per EN ISO 13849-1, table C1
Switching capacity >Maximum motor rating >Single-phase >200 V AC	600 V AC
Switching capacity >Maximum motor rating >Single-phase >240 V AC	60 A
Switching capacity >Maximum motor rating >Three-phase >200 V AC	10 A
Switching capacity >Maximum motor rating >Three-phase >240 V AC	A 600 P 600
Switching capacity >Maximum motor rating >Three-phase >480 V AC	3 HP
Switching capacity >Maximum motor rating >Three-phase >600 V AC	7.5 HP
Short Circuit Current Rating >Basic Rating	10 HP
Short Circuit Current Rating >max. Fuse	15 HP
Terminal capacity >Solid or flexible conductor with ferrule	15 HP
Terminal capacity >Terminal screw	40 HP
Terminal capacity >Tightening torque	50 HP
Rated operational current for specified heat dissipation [In]	10 kA
Heat dissipation per pole, current-dependent [Pvid]	150 A
Equipment heat dissipation, current-dependent [Pvid]	14 - 2 AWG
Static heat dissipation, non-current-dependent [Pvs]	M5
Heat dissipation capacity [Pdiss]	26.5 lb-in
Operating ambient temperature min.	63 A
Operating ambient temperature max.	4.5 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	-25 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	+50 °C
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	UV resistance only in connection with protective shield.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as safety switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as emergency stop installation	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as reversing switch	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of switches	Yes
Max. rated operation voltage Ue AC	No
Rated operating voltage	No
Rated permanent current Iu	No
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	1
Rated operation power at AC-3, 400 V	690 V
Rated short-time withstand current lcw	690 - 690 V
Rated operation power at AC-23, 400 V	63 A
Switching power at 400 V	63 A
Conditioned rated short-circuit current Iq	63 A
Number of poles	30 kW
Number of auxiliary contacts as normally closed contact	1.26 kA
Number of auxiliary contacts as normally open contact	30 kW
Number of auxiliary contacts as change-over contact	30 kW
Motor drive optional	4 kA
Motor drive integrated	3
Voltage release optional	0
Device construction	0
Suitable for ground mounting	0
Suitable for front mounting 4-hole	No
Suitable for front mounting centre	No
Suitable for distribution board installation	No
Suitable for intermediate mounting	Built-in device fixed built-in technique
Colour control element	Yes
Type of control element	No
Interlockable	No
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	Yes
Degree of protection (NEMA)	Other
Product Standards	Other
UL File No.	No
UL Category Control No.	Screw connection
CSA File No.	IP65
CSA Class No.	1
North America Certification	UL 60947-4-1;CSA - C22.2 No. 60947-4-1-14; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking
Suitable for	E36332
Degree of Protection	NLRV

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.