P1-32/I2H/N
227869 P1-32/I2H/N
227869

Açma-Kapama anahtarı, P1, 32 A, yüzeye montaj, 3 kutuplu + N, siyah tutma yeri ve ön plaka ile, sert montajlı versiyon
Açma-Kapama anahtarı, Ürün yelpazesi: Açma-Kapama anahtarı, Parça grubu referansı: P1, siyah parmak kavramalı ve ön plakalı, Notlar: sert montajlı versiyon, Sağlanan ekipmanla ilgili bilgiler: kullanıcı tarafından takılan yardımcı kontak., 3 kutuplu + N, Koruma Derecesi: IP65, Tasarım: yüzeye montaj, Motor gücü AC-23A, 50 - 60 Hz 400 V: P = 15 kW, Nominal kesintisiz akım: Iu = 32 A, Standartlar: IEC/EN 60947, VDE 0660, IEC/ EN 60204, IEC/EN 60947-3'e göre yük ayırıcı

Product range	On-Off switch
Part group reference	P1
Information about equipment supplied	with black thumb grip and front plate
Notes	auxiliary contact fitted by user.
Number of poles	hard knockout version
Degree of Protection	3 pole + N
Design	0 N/O
Contact sequence	0 N/C
Front plate no.	IP65
400 V [P]
Rated uninterrupted current [Iu]	surface mounting
Note on rated uninterrupted current !u
Standards
Climatic proofing
Ambient temperature >Enclosed	15 kW
Overvoltage category/pollution degree	32 A
Rated impulse withstand voltage [Uimp]	Rated uninterrupted current Iu is specified for max. cross-section.
Mechanical shock resistance	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch-disconnector according to IEC/EN 60947-3
Mounting position	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical variables >Number of poles	-25 - +40 °C
Mechanical variables >Auxiliary contacts 0 N/O Mechanical variables >Auxiliary contacts 0 N/C Electrical characteristics >Rated operational voltage [Ue]	III/3
Electrical characteristics >Rated uninterrupted current [Iu]	6000 V AC
Electrical characteristics >Note on rated uninterrupted current !u	15 g
Load rating with intermittent operation, class 12 >AB 25 % DF	As required
Load rating with intermittent operation, class 12 >AB 40 % DF	3 pole + N
Load rating with intermittent operation, class 12 >AB 60 % DF	0 N/O
Short-circuit rating >Fuse	0 N/C
Rated short-time withstand current (1 s current) [Icw ]	690 V AC
Note on rated short-time withstand current lcw	32 A
Rated conditional short-circuit current [Iq]	Rated uninterrupted current Iu is specified for max. cross-section.
cos ϕ rated making capacity as per IEC 60947-3	2 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >230 V	1.6 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	50 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	640 Arms
Safe isolation to EN 61140 >between the contacts	Current for a time of 1 second
Safe isolation to EN 61140 >Current heat loss per contact at Ie	80 kA
Lifespan, mechanical [Operations]	320 A
Maximum operating frequency [Operations/h]	260 A
AC >AC-3 >Rating, motor load switch [P] >220 V 230 V [P]	300 A
AC >AC-3 >Rating, motor load switch [P] >400 V 415 V [P]	290 A
AC >AC-3 >Rating, motor load switch [P] >500 V [P]	250 A
AC >AC-3 >Rating, motor load switch [P] >690 V [P]	440 V AC
AC >AC-3 >Rated operational current motor load switch >230 V [Ie]	1.8 W
AC >AC-3 >Rated operational current motor load switch >400V 415 V [Ie]	> 0.3 x 106
AC >AC-3 >Rated operational current motor load switch >500 V [Ie ]	1200
AC >AC-3 >Rated operational current motor load switch >690 V [Ie]	7.5 kW
AC >AC-21A >Rated operational current switch >440 V [Ie]	13 kW
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >230 V [P]	18.5 kW
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	15 kW
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	26.4 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	26.4 A
AC >AC-23A >Rated operational current motor load switch >230 V [Ie]	23.4 A
AC >AC-23A >Rated operational current motor load switch >400 V 415 V [Ie]	14.7 A
AC >AC-23A >Rated operational current motor load switch >500 V [Ie]	32 A
AC >AC-23A >Rated operational current motor load switch >690 V [Ie]	7.5 kW
DC >DC-1, Load-break switches L/R = 1 ms >Rated operational current [Ie]	15 kW
DC >DC-1, Load-break switches L/R = 1 ms >Voltage per contact pair in series	18.5 kW
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Rated operational current [Ie]	15 kW
DC >DC-23A, motor load switch L/R = 15 ms >24 V >Contacts	32 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Rated operational current [Ie]	32 A
DC >DC-23A, motor load switch L/R = 15 ms >48 V >Contacts	30 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Rated operational current [Ie]	19.8 A
DC >DC-23A, motor load switch L/R = 15 ms >60 V >Contacts	32 A
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Rated operational current [Ie]	60 V
DC >DC-23A, motor load switch L/R = 15 ms >120 V >Contacts	25 A
Control circuit reliability at 24 V DC, 10 mA [Fault probability]	1 Quantity
Solid or stranded	25 A
Flexible with ferrules to DIN 46228	2 Quantity
Terminal screw	25 A
Tightening torque for terminal screw	2 Quantity
Notes	12 A
Contacts >Rated operational voltage [Ue]	3 Quantity
Contacts >Rated uninterrupted current max. >Main conducting paths >General use	< 10 -5, < 1 fault in 100000 operations HF
Contacts >Rated uninterrupted current max. >Auxiliary contacts >General Use [IU]	1 x (1,5 - 6) 2 x (1,5 - 6) mm2
Contacts >Rated uninterrupted current max. >Auxiliary contacts >Pilot Duty	1 x (1 - 4) 2 x (1 - 4) mm2
Switching capacity >Maximum motor rating >Single-phase >120 V AC	M4
Switching capacity >Maximum motor rating >Single-phase >200 V AC	1.6 Nm
Switching capacity >Maximum motor rating >Single-phase >240 V AC	B10d values as per EN ISO 13849-1, table C1
Switching capacity >Maximum motor rating >Three-phase >200 V AC	600 V AC
Switching capacity >Maximum motor rating >Three-phase >240 V AC	30 A
Switching capacity >Maximum motor rating >Three-phase >480 V AC	10 A
Switching capacity >Maximum motor rating >Three-phase >600 V AC	A 600 P 600
Short Circuit Current Rating >Basic Rating	1 HP
Short Circuit Current Rating >max. Fuse	2 HP
Short Circuit Current Rating >High fault rating	3 HP
Short Circuit Current Rating >max. Fuse	3 HP
Terminal capacity >Solid or flexible conductor with ferrule	7.5 HP
Terminal capacity >Terminal screw	10 HP
Terminal capacity >Tightening torque	15 HP
Rated operational current for specified heat dissipation [In]	5 kA
Heat dissipation per pole, current-dependent [Pvid]	110 A
Equipment heat dissipation, current-dependent [Pvid]	10 kA
Static heat dissipation, non-current-dependent [Pvs]	50, Class J A
Heat dissipation capacity [Pdiss]	14 - 8 AWG
Operating ambient temperature min.	M4
Operating ambient temperature max.	14.1 lb-in
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	32 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	1.8 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	-25 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	+40 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	UV resistance only in connection with protective shield.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	Is the panel builder´s responsibility.
Version as safety switch	Is the panel builder´s responsibility.
Version as emergency stop installation	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as reversing switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Max. rated operation voltage Ue AC	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operating voltage	No
Rated permanent current Iu	No
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	No
Rated operation power at AC-3, 400 V	No
Rated short-time withstand current lcw	1
Rated operation power at AC-23, 400 V	690 V
Switching power at 400 V	690 - 690 V
Conditioned rated short-circuit current Iq	32 A
Number of poles	32 A
Number of auxiliary contacts as normally closed contact	32 A
Number of auxiliary contacts as normally open contact	13 kW
Number of auxiliary contacts as change-over contact	0.64 kA
Motor drive optional	15 kW
Motor drive integrated	15 kW
Voltage release optional	80 kA
Device construction	4
Suitable for ground mounting	0
Suitable for front mounting 4-hole	0
Suitable for front mounting centre	0
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	No
Type of control element	Complete device in housing
Interlockable	Yes
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	No
Product Standards	No
UL File No.	Black
UL Category Control No.	Toggle
CSA File No.	No
CSA Class No.	Screw connection
North America Certification	IP65
Specially designed for North America	12
Suitable for	UL 60947-4-1;CSA - C22.2 No. 60947-4-1-14; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking
Degree of Protection	E36332

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.