alt
alt

P1-32/I2-SI-SW
207330 P1-32/I2-SI-SW
207330

Emniyet şalteri, P1, 32 A, 3 kutuplu, DURDURMA fonksiyonu, Siyah döner kulp ve kilitleme halkası ile, Kapak kilidi ile 0 konumunda kilitlenebilir, "emniyet şalteri" uyarı etiketi ile Emniyet şalteri, Ürün yelpazesi: emniyet şalteri, Parça grubu referansı: P1, Durdurma Fonksiyonu: DURDURMA fonksiyonu, Siyah döner kulp ve kilitleme halkası ile, Notlar: "emniyet şalteri" uyarı etiketi ile, Tedarik edilen ekipman hakkında bilgi: Kullanıcı tarafından takılan yardımcı kontak veya nötr iletken., 3 kutuplu, Kilitleme olanağı: Kapak kilidi ile 0 konumunda kilitlenebilir, Koruma derecesi: IP65, Tasarım: yüzeye montaj, Motor derecesi AC-23A, 50 - 60 Hz 400 V: P = 15 kW, Anma kesintisiz akımı: Iu = 32 A, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, IEC/EN 60947-3'e göre anahtar ayırıcı

Emniyet şalteri, P1, 32 A, 3 kutuplu, DURDURMA fonksiyonu, Siyah döner kulp ve kilitleme halkası ile, Kapak kilidi ile 0 konumunda kilitlenebilir, "emniyet şalteri" uyarı etiketi ile
Emniyet şalteri, Ürün yelpazesi: emniyet şalteri, Parça grubu referansı: P1, Durdurma Fonksiyonu: DURDURMA fonksiyonu, Siyah döner kulp ve kilitleme halkası ile, Notlar: "emniyet şalteri" uyarı etiketi ile, Tedarik edilen ekipman hakkında bilgi: Kullanıcı tarafından takılan yardımcı kontak veya nötr iletken., 3 kutuplu, Kilitleme olanağı: Kapak kilidi ile 0 konumunda kilitlenebilir, Koruma derecesi: IP65, Tasarım: yüzeye montaj, Motor derecesi AC-23A, 50 - 60 Hz 400 V: P = 15 kW, Anma kesintisiz akımı: Iu = 32 A, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, IEC/EN 60947-3'e göre anahtar ayırıcı

Product range safety switch
Part group reference P1
Stop Function STOP function
Information about equipment supplied With black rotary handle and locking ring
Notes Auxiliary contact or neutral conductor fitted by user.
Number of poles with warning label „safety switch”
Locking facility 3 pole
Degree of Protection 0 N/O
Design 0 N/C
Contact sequence Lockable in position 0 with cover interlock
Function IP65
400 V [P] 000Z083
Rated uninterrupted current [Iu] surface mounting
Note on rated uninterrupted current !u 000Z428
Standards 115S009-2
Climatic proofing 1150SPC-194
Ambient temperature
>Enclosed
15 kW
Overvoltage category/pollution degree 32 A
Rated impulse withstand voltage [Uimp] Rated uninterrupted current Iu is specified for max. cross-section.
Mechanical shock resistance IEC/EN 60947, VDE 0660, IEC/EN 60204
Switch-disconnector according to IEC/EN 60947-3
Mounting position Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Mechanical variables
>Number of poles
-25 - +40 °C
Mechanical variables
>Auxiliary contacts
0 N/O
Mechanical variables
>Auxiliary contacts
0 N/C
Electrical characteristics
>Rated operational voltage [Ue]
III/3
Electrical characteristics
>Rated uninterrupted current [Iu]
6000 V AC
Electrical characteristics
>Note on rated uninterrupted current !u
15 g
Load rating with intermittent operation, class 12
>AB 25 % DF
As required
Load rating with intermittent operation, class 12
>AB 40 % DF
3 pole
Load rating with intermittent operation, class 12
>AB 60 % DF
0 N/O
Short-circuit rating
>Fuse
0 N/C
Rated short-time withstand current (1 s current) [Icw ] 690 V AC
Note on rated short-time withstand current lcw 32 A
Rated conditional short-circuit current [Iq] Rated uninterrupted current Iu is specified for max. cross-section.
cos ϕ rated making capacity as per IEC 60947-3 2 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3
>230 V
1.6 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3
>400/415 V
1.3 x Ie
Rated breaking capacity cos ϕ to IEC 60947-3
>500 V
50 A gG/gL
Rated breaking capacity cos ϕ to IEC 60947-3
>690 V
640 Arms
Safe isolation to EN 61140
>between the contacts
Current for a time of 1 second
Safe isolation to EN 61140
>Current heat loss per contact at Ie
80 kA
Lifespan, mechanical [Operations] 320 A
Maximum operating frequency [Operations/h] 260 A
AC
>AC-3
>Rating, motor load switch [P]
>220 V 230 V [P]
300 A
AC
>AC-3
>Rating, motor load switch [P]
>400 V 415 V [P]
290 A
AC
>AC-3
>Rating, motor load switch [P]
>500 V [P]
250 A
AC
>AC-3
>Rating, motor load switch [P]
>690 V [P]
440 V AC
AC
>AC-3
>Rated operational current motor load switch
>230 V [Ie]
1.8 W
AC
>AC-3
>Rated operational current motor load switch
>400V 415 V [Ie]
> 0.3 x 106
AC
>AC-3
>Rated operational current motor load switch
>500 V [Ie ]
1200
AC
>AC-3
>Rated operational current motor load switch
>690 V [Ie]
7.5 kW
AC
>AC-21A
>Rated operational current switch
>440 V [Ie]
13 kW
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>230 V [P]
18.5 kW
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>400 V 415 V [P]
15 kW
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>500 V [P]
26.4 A
AC
>AC-23A
>Motor rating AC-23A, 50 - 60 Hz [P]
>690 V [P]
26.4 A
AC
>AC-23A
>Rated operational current motor load switch
>230 V [Ie]
23.4 A
AC
>AC-23A
>Rated operational current motor load switch
>400 V 415 V [Ie]
14.7 A
AC
>AC-23A
>Rated operational current motor load switch
>500 V [Ie]
32 A
AC
>AC-23A
>Rated operational current motor load switch
>690 V [Ie]
7.5 kW
DC
>DC-1, Load-break switches L/R = 1 ms
>Rated operational current [Ie]
15 kW
DC
>DC-1, Load-break switches L/R = 1 ms
>Voltage per contact pair in series
18.5 kW
DC
>DC-23A, motor load switch L/R = 15 ms
>24 V
>Rated operational current [Ie]
15 kW
DC
>DC-23A, motor load switch L/R = 15 ms
>24 V
>Contacts
32 A
DC
>DC-23A, motor load switch L/R = 15 ms
>48 V
>Rated operational current [Ie]
32 A
DC
>DC-23A, motor load switch L/R = 15 ms
>48 V
>Contacts
30 A
DC
>DC-23A, motor load switch L/R = 15 ms
>60 V
>Rated operational current [Ie]
19.8 A
DC
>DC-23A, motor load switch L/R = 15 ms
>60 V
>Contacts
32 A
DC
>DC-23A, motor load switch L/R = 15 ms
>120 V
>Rated operational current [Ie]
60 V
DC
>DC-23A, motor load switch L/R = 15 ms
>120 V
>Contacts
25 A
Control circuit reliability at 24 V DC, 10 mA [Fault probability] 1 Quantity
Solid or stranded 25 A
Flexible with ferrules to DIN 46228 2 Quantity
Terminal screw 25 A
Tightening torque for terminal screw 2 Quantity
Notes 12 A
Terminal capacity
>Terminal screw
3 Quantity
Terminal capacity
>Tightening torque
< 10 -5, < 1 fault in 100000 operations HF
Rated operational current for specified heat dissipation [In] 1 x (1,5 - 6)
2 x (1,5 - 6) mm2
Heat dissipation per pole, current-dependent [Pvid] 1 x (1 - 4)
2 x (1 - 4) mm2
Equipment heat dissipation, current-dependent [Pvid] M4
Static heat dissipation, non-current-dependent [Pvs] 1.6 Nm
Heat dissipation capacity [Pdiss] B10d values as per EN ISO 13849-1, table C1
Operating ambient temperature min. M4
Operating ambient temperature max. 14.128 lb-in
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
32 A
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
1.8 W
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
0 W
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
0 W
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
0 W
10.2 Strength of materials and parts
>10.2.5 Lifting
-25 °C
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
+40 °C
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components UV resistance only in connection with protective shield.
10.7 Internal electrical circuits and connections Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function Is the panel builder´s responsibility.
Version as main switch Is the panel builder´s responsibility.
Version as maintenance-/service switch Is the panel builder´s responsibility.
Version as safety switch Is the panel builder´s responsibility.
Version as emergency stop installation The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as reversing switch Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Max. rated operation voltage Ue AC The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operating voltage No
Rated permanent current Iu No
Rated permanent current at AC-23, 400 V Yes
Rated permanent current at AC-21, 400 V No
Rated operation power at AC-3, 400 V No
Rated short-time withstand current lcw 1
Rated operation power at AC-23, 400 V 690 V
Switching power at 400 V 690 - 690 V
Conditioned rated short-circuit current Iq 32 A
Number of poles 32 A
Number of auxiliary contacts as normally closed contact 32 A
Number of auxiliary contacts as normally open contact 13 kW
Number of auxiliary contacts as change-over contact 0.64 kA
Motor drive optional 15 kW
Motor drive integrated 15 kW
Voltage release optional 80 kA
Device construction 3
Suitable for ground mounting 0
Suitable for front mounting 4-hole 0
Suitable for front mounting centre 0
Suitable for distribution board installation No
Suitable for intermediate mounting No
Colour control element No
Type of control element Complete device in housing
Interlockable Yes
Type of electrical connection of main circuit No
Degree of protection (IP), front side No
Degree of protection (NEMA) No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

T5-7-SOND*/V/SVB
Eaton
T5-6-SOND*/V/SVB
Eaton
T5-7-SOND*/EA/SVB
Eaton
T5-6-SOND*/EA/SVB
Eaton
T5-5-SOND*/EA/SVB
Eaton
T5B-8-SOND*/Z
Eaton
T5B-7-SOND*/Z
Eaton
T5B-4-SOND*/EA/SVB
Eaton
T5B-3-SOND*/EA/SVB
Eaton
T5B-2-SOND*/EA/SVB
Eaton
T5B-1-SOND*/E
Eaton
T3-11-SOND*/Z
Eaton