MSC-D-16-M15(230V50HZ)
100414 MSC-D-16-M15(230V50HZ)
100414

DOL marş motoru, 380 V 400 V 415 V: 7,5 kW, Ir= 10 - 16 A, 230 V 50 Hz, 240 V 60 Hz, AC
DOL yolverici, Temel cihaz: MSC, Notlar: IE3 verimlilik sınıfına sahip motorlar için uygun değildir, Motor değerleri Motor gücü AC-3 380 V 400 V 415 V: P= 7,5 kW, Aşırı yük bobinlerinin ayar aralığı: Ir= 10 - 16 A, Koordinasyon: Koordinasyon türü “1”, Çalıştırma gerilimi: 230 V 50 Hz, 240 V 60 Hz, AC, Standartlar: IEC/EN 60947-4-1, VDE 0660

Basic function	DOL starters (complete devices)
Basic device	MSC
Notes	Not suitable for motors with efficiency class IE3.
Connection technique	Screw terminals
Connection to SmartWire-DT	no
Motor rating [P] >AC-3 >380 V 400 V 415 V [P]
Rated operational current >AC-3 >380 V 400 V 415 V [Ie]	7.5 kW
Rated short-circuit current 380 - 415 V [Iq ]	15.2 A
Setting range of overload releases [Ir]	50 kA
Coordination
Contact sequence	10 - 16 A
Actuating voltage	Type of coordination “1”
Motor-protective circuit-breakers
Contactor	230 V 50 Hz, 240 V 60 Hz
DOL starter wiring set Mechanical connection element and electrical electric contact module	AC
Notes	PKZM0-16 Type
Notes	DILM15-10(...) Part no.
Standards	PKZM0-XDM12 Type
Mounting position	BK25/3-PKZ0-E extension terminal and if necessary B3.../...-PKZ0 three-phase commoning link can be added to motor-starter combinations to make Type F starters in accordance with UL508.
Altitude	The DOL starters (complete units) consist of a PKZM0 motor protective circuit breaker and a DILM contactor. With the adapter-less top-hat rail mounting of starters up to 15 A, only the motor protective circuit breaker on the top-hat rail requires an adapter. The contactors are provided with mechanical support via a mechanical connection element. Control wire guide with max. 6 conductors up to 2.5 mm external diameter or 4 conductors up to 3.5 mm external diameter. The connection of the main circuit between PKZ and contactor is established with electrical contact modules. When using the auxiliary contacts DILA‐XHIT… (￫ 101042) the plug-in electrical connector can be removed without the removal of the front mounting auxiliary contact.
Ambient temperature
Rated impulse withstand voltage [Uimp]	IEC/EN 60947-4-1, VDE 0660
Overvoltage category/pollution degree
Rated operational voltage [Ue]	Max. 2000 m
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	-25 - +55
Motor protective circuit breaker PKZM0, PKE
DILM contactors >Current heat loss >Current heat loss at Ie to AC-3/400 V	6000 V AC
DILM contactors >Power consumption of the coil in a cold state and 1.0 x US >Dual-voltage coil 50 Hz [Sealing]	III/3
Auxiliary contacts >Pilot Duty >AC operated	230 - 415 V
Auxiliary contacts >Pilot Duty >DC operated	15 A
Auxiliary contacts >General Use >AC
Auxiliary contacts >General Use >AC	PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group
Auxiliary contacts >General Use >DC	10.5 W
Auxiliary contacts >General Use >DC	1.4 W
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	A600
Equipment heat dissipation, current-dependent [Pvid]	P300
Static heat dissipation, non-current-dependent [Pvs]	600 V
Heat dissipation capacity [Pdiss]	15 A
Operating ambient temperature min.	250 V
Operating ambient temperature max.	1 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	15.5 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	3.5 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	10.5 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	1.4 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	-25 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	+55 °C
10.3 Degree of protection of ASSEMBLIES
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Kind of motor starter	Is the panel builder´s responsibility.
With short-circuit release	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation power at AC-3, 230 V, 3-phase	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated power, 460 V, 60 Hz, 3-phase	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated power, 575 V, 60 Hz, 3-phase
Rated operation current Ie
Rated operation current at AC-3, 400 V	Direct starter
Overload release current setting	Yes
Rated conditional short-circuit current, type 1, 480 Y/277 V	230 - 230 V
Rated conditional short-circuit current, type 1, 600 Y/347 V	0 - 0 V
Rated conditional short-circuit current, type 2, 230 V	0 - 0 V
Rated conditional short-circuit current, type 2, 400 V	AC
Number of auxiliary contacts as normally open contact	4 kW
Number of auxiliary contacts as normally closed contact	7.5 kW
Ambient temperature, upper operating limit	0 kW
Temperature compensated overload protection	0 kW
Release class	15.2 A
Type of electrical connection of main circuit	15 A
Type of electrical connection for auxiliary- and control current circuit	16 - 16 A
Rail mounting possible	0 A
With transformer	0 A
Number of command positions	0 A
Suitable for emergency stop	0 A
Coordination class according to IEC 60947-4-3	1
Number of indicator lights	0
External reset possible	60 °C
With fuse	Yes
Degree of protection (IP)	CLASS 10 A
Degree of protection (NEMA)	Screw connection
Supporting protocol for TCP/IP	Screw connection
Supporting protocol for PROFIBUS	Yes
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	No
Supporting protocol for MODBUS	Class 1
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	IP20
Supporting protocol for PROFINET IO	Other
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Width	No
Height	No
Depth	No
Product Standards	No
UL File No.	No
UL Category Control No.	No
CSA File No.	No
CSA Class No.	No
North America Certification	No
Specially designed for North America	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.