HQL lamba yükü için starter, 18A, +bara adaptörü Montaj süresi avantajlarıyla bara adaptöründe lamba testi için önceden monte edilmiş starter
HQL lamba yükü için starter, 18A, +bara adaptörü
Montaj süresi avantajlarıyla bara adaptöründe lamba testi için önceden monte edilmiş starter
Basic device | LSC |
Connection technique | Screw terminals |
Connection to SmartWire-DT | no |
AC-5a >380 V 400 V [Ie] |
|
AC-5b >380 V 400 V [Ie] |
18 A |
Standards | 21 A |
Ambient temperature | |
Rated impulse withstand voltage [Uimp] | UL 508 (on request) CSA C 22.2 No. 14 (on request) |
Overvoltage category/pollution degree | -25 - +55 |
Rated operational voltage [Ue] | |
Motor protective circuit breaker PKZM0, PKE | 6000 V AC |
Rated operational current for specified heat dissipation [In] | III/3 |
Heat dissipation per pole, current-dependent [Pvid] | 230 - 415 V |
Equipment heat dissipation, current-dependent [Pvid] | |
Static heat dissipation, non-current-dependent [Pvs] | PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group |
Heat dissipation capacity [Pdiss] | |
Operating ambient temperature min. | 18 A |
Operating ambient temperature max. | 2.4 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
7.2 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
2.1 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
-25 °C |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
+55 °C |
10.2 Strength of materials and parts >10.2.5 Lifting |
|
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors | Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | Is the panel builder´s responsibility. |
Rated control supply voltage Us at AC 50HZ | Is the panel builder´s responsibility. |
Rated control supply voltage Us at AC 60HZ | Is the panel builder´s responsibility. |
Rated control supply voltage Us at DC | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Voltage type for actuating | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated operation current Ie at AC-1, 400 V | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated operation current Ie at AC-3, 400 V | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Rated operation power at AC-3, 400 V | |
Rated operation current Ie at AC-4, 400 V | |
Rated operation power at AC-4, 400 V | 400 - 400 V |
Rated operation power NEMA | 0 - 0 V |
Modular version | 0 - 0 V |
Number of auxiliary contacts as normally open contact | AC |
Number of auxiliary contacts as normally closed contact | 18 A |
Type of electrical connection of main circuit | 0 A |
Number of normally closed contacts as main contact | 0 kW |
Number of main contacts as normally open contact | 0 A |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.