ESR5-NOS-31-230VAC
153152 ESR5-NOS-31-230VAC
153152

Güvenlik rölesi acil durdurma/koruyucu kapı, 230VAC, 3 etkinleştirme yolu
Güvenlik rölesi tek kanallı, besleme voltajı 230VAC 50/60Hz, 3 Etkinleştirme akım yolu (IEC/EN 60204 Durdurma kategorisi 0), 1 sinyal akım yolu, ön parmaktan ve arka parmaktan dikey çalıştırma ile EN 50274'e uygun bara etiket örtüsü -el geçirmez, kedi için uygundur. 2 EN 954-1'e göre / PL d EN ISO 13849-1'e göre / SILCL2 IEC 62061'e göre / SIL2 IEC 61508'e göre, koruma sınıfı IP20, kurulum konumu minimum IP54, TÜV testinden geçmiş, nominal darbe gerilimi 4 kV / temel izolasyon (güvenli izolasyon, güçlendirilmiş izolasyon ve A1-A2 / lojik / etkinleştirme ve sinyal akım yolları arasında 6 kV)

Product range	Electronic safety relays
Basic function	Emergency stop; emergency switching off Protective door
Mounting width
Operation	22.5 mm
Supply voltage [Us]	Automatically or manually monitored start
Approval	Single-channel
Safety related characteristics	230 V AC, 50/60 Hz
Enable current paths to IEC/EN 60204-1 Stop category 0
Signal current paths	Cat. 1 PL c according EN ISO 13849-1 SILCL 1 according to IEC 62061 SIL 1 according to IEC 61508
Intended use
Policies List	3
Standards	1
Dimensions (W x H x D)
Mounting width	Safety relay for monitoring emergency stop and protective door switch. Module used to safely interrupt electrical circuits.
Weight	EMV 2004/108/EG, Maschinen 2006/42/EG
Mounting position	EN ISO 13849-1:2008, EN 62061:2005+AC:2010, EN 61508, Parts 1-7:2001, EN 50178:1997, EN 60204-1:2006+A1:2009 EN 50156-1:2013
Mounting	22.5 x 99 x 114.5 mm
Connection type	22.5 mm
Lifespan, mechanical [Operations]	0,10 kg
Terminal capacity >Solid	As required
Terminal capacity >Flexible with ferrule	Top-hat rail IEC/EN 60715, 35 mm
Terminal capacity >Solid or stranded	M3 screw terminals
Terminal screw >Pozidriv screwdriver	10 x 106
Terminal screw >Standard screwdriver	1x (0.2 – 2.5) 2x (0.2 – 1) mm2
Terminal screw >Max. tightening torque	1x (0.25 – 2.5) 2x (0.25 – 1) mm2
Stripping length	24 - 12 AWG
Material	2 Size
Duty factor	0.6 x 3.5 mm
Operating conditions >Climatic environmental conditions >Climatic proofing	0.6 Nm
Operating conditions >Ambient temperature >Operation [ϑ]	7 mm
Operating conditions >Ambient temperature >Storage [ϑ]	Housing: polyamide PA not reinforced Contacts: Material: silver tin oxide, gold plated (AgSnO2, 0.2 µm Au)
Operating conditions >Ambient temperature >Condensation	100 % DF
Operating conditions >Atmospheric conditions >relative humidity	Cold to EN 60068-2-1 Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Operating conditions >Atmospheric conditions >Air pressure (operation)	-25 - +55 °C
Operating conditions >Atmospheric conditions >Altitude [Above sea level]	-40 - +85 °C
Power loss [P]	Non-condensing
Degree of protection to VDE 0470-1 >Enclosures	Max. 75 %
Degree of protection to VDE 0470-1 >Terminals	795 - 1080 hPa
Degree of protection to VDE 0470-1 >Degree of Protection	2000 m
Degree of protection to VDE 0470-1 >B10d [switching cycles]	5.43 W
Protection against direct contact when actuated from front (EN 50274)
Vibrations (IEC/EN 60068-2-6)	IP20
Clearance in air and creepage distances	IP20
Rated impulse withstand voltage [Uimp]	Installation location: ≥ IP54
Insulation	300000
Overvoltage category/pollution degree	Finger and back-of-hand proof
Stop category [according to EN60204-1]	10 - 150 Hz Amplitude: 0.15 mm Acceleration: 2 g
Technical safety parameters: >Values according to EN ISO 13849-1 >Performance level [according to EN ISO 13849-1]	EN 50178, UL 508, CSA C22.2, No. 14-95
Technical safety parameters: >Values according to EN ISO 13849-1 >Category [according to EN ISO 13849-1]	4000 V AC
Safety integrity level claim limit [in accordance with 62061]	Basic isolation Safe isolation, reinforced insulation and 6 kV between A1-A2 / logic / enable and signal current paths.
Safety integrity level [In accordance with IEC 61508]	III/2
Probability of failure per hour [PFHd]	2,42
Rated operational voltage [Ue]	PL c
Rated operational voltage [Ue]	Kat. 1
Permissible range	SILCL 1
Rated insulation voltage [Ui]	SIL 1
Quadratic summation current	2.42 x 10-10
Notes	230 V AC
Inrush current	230 V AC V
Minimum switching capacity	0.85 - 1.1 x Ue
Current consumption	250 V AC
Voltage at input, starting and feedback circuit	72 A2 (ITH2 = I12 + I22 + I32) A2
Pick-up time (K1, K2) for UN automatic mode, typical [tA]	Observe derating curve ￫ Engineering
Pick-up time (K1, K2) for UN manual operation, typical [tA]	min - max0.01 - 6 A
Pick-up time	0.01 W
Typical pick-up time
Reset time (K1, K2) for UN , normally [tR]	DC: 22 mA
Recovery time [tW ]	Approx. 24 V DC
Simultaneity for inputs 1/2 [tsync]	300 ms
Maximum permissible total cable resistance (input and starting circuits for UN) [RL]	50 ms
Maximum switching frequency	at Ue in automatic mode: normally 300 at Ue in manual mode: normally 50 ms
Status indication	300 ms (if actuated via A1 or S11/S12)
Contact type >Non-delayed enable current paths	150 (on actuation via A1) 20 (on actuation via S11/S12) ms
Contact type >Delayed signal current path	Approx. 1000 ms
Switching voltage	∞ ms
Limiting continuous current	50 Ω
Short-circuit protection for output circuits, external	0.5 Hz
Output fuse >NEOZED (N/O)	Green LED
Output fuse >NEOZED (N/C)
Maximum breaking power >Resistive load (τ = 0 ms) >24 V DC	3
Maximum breaking power >Resistive load (τ = 0 ms) >48 V DC	1
Maximum breaking power >Resistive load (τ = 0 ms) >110 V DC	min – max10 - 250 V AC 10 - 250 V DC
Maximum breaking power >Resistive load (τ = 0 ms) >220 V DC	perN/O: 6 N/C: 5 A
Maximum breaking power >Resistive load (τ = 0 ms) >250 V AC	Fuse 10 A gL/gG (Enable current paths) Fuse 6 A gL/gG (Signal current paths)
Maximum breaking power >Inductive load (τ = 40 ms) >24 V DC	10 gL/gG
Maximum breaking power >Inductive load (τ = 40 ms) >48 V DC	6 gL/gG
Maximum breaking power >Inductive load (τ = 40 ms) >110 V DC	144 W
Maximum breaking power >Inductive load (τ = 40 ms) >220 V DC	230 W
Switching capacity	68 W
Further information (flip catalog)	88 W
Emitted interference	2000 VA
Interference immunity	48 W
Rated operational current for specified heat dissipation [In]	40 W
Heat dissipation per pole, current-dependent [Pvid]	35 W
Equipment heat dissipation, current-dependent [Pvid]	33 W
Static heat dissipation, non-current-dependent [Pvs]	In accordance with IEC 60947-5-1
Heat dissipation capacity [Pdiss]	description
Operating ambient temperature min.
Operating ambient temperature max.	In accordance with EN 61000-6-4
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	according to EN 61000-6-2
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	5.43 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-20 °C
10.3 Degree of protection of ASSEMBLIES	+55 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Model	Does not apply, since the entire switchgear needs to be evaluated.
Suitable for monitoring of position switches	Is the panel builder´s responsibility.
Suitable for monitoring of emergency-stop circuits	Is the panel builder´s responsibility.
Suitable for monitoring of valves	Is the panel builder´s responsibility.
Suitable for monitoring of optoelectronic protection equipment	Is the panel builder´s responsibility.
Suitable for monitoring of tactile sensors	Is the panel builder´s responsibility.
Suitable for monitoring of magnetic switches	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Suitable for monitoring of proximity switches	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Type of electric connection	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rail mounting possible	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated control supply voltage Us at AC 50HZ
Rated control supply voltage Us at AC 60HZ
Rated control supply voltage Us at DC	Basic device
Voltage type for actuating	Yes
With detachable clamps	Yes
Evaluation inputs	No
With start input	No
With muting function	No
With feedback circuit	No
Release-delay	No
Number of outputs, safety related, undelayed, with contact	Screw connection
Number of outputs, safety related, delayed, with contact	Yes
Number of outputs, safety related, undelayed, semiconductors	0 - 0 V
Number of outputs, safety related, delayed, semiconductors	0 - 0 V
Number of outputs, signalling function, undelayed, with contact	0 - 0 V
Number of outputs, signalling function, delayed, with contact	AC
Number of outputs, signalling function, undelayed, semiconductors	Yes
Number of outputs, signalling function, delayed, semiconductors	1-channel
Category according to EN 954-1	Yes
Type of safety acc. IEC 61496-1	No
Stop category acc. IEC 60204	Yes
Performance level acc. EN ISO 13849-1	0 - 0 s
SIL according to IEC 61508	3
With approval for TÜV	0
With approval for BG BIA	0
With approval according to UL	0
Width	1
Height	0
Depth	0
Product Standards	0
UL File No.	1
UL Category Control No.	None
CSA File No.	0
CSA Class No.	Level c
North America Certification	1
Degree of Protection	Yes
Characteristic curve	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.