Geniş giriş aralıklı emniyet rölesi acil durdurma/koruyucu kapı/ışık perdesi izleme, 24 V-230 VDC/AC SILCL 3'e kadar kontrollü durdurma, emniyet kapıları ve ışık perdeleri için emniyet rölesi, kat. 4, PL e, 1 veya 2 kanallı çalışma, otomatik veya manuel, izlemeli başlatma, 3 etkinleştirme yolu, 1 sinyalleme akımı yolu, US = 24 ... 230V AC/DC, takılabilir vidalı terminal
Geniş giriş aralıklı emniyet rölesi acil durdurma/koruyucu kapı/ışık perdesi izleme, 24 V-230 VDC/AC
SILCL 3'e kadar kontrollü durdurma, emniyet kapıları ve ışık perdeleri için emniyet rölesi, kat. 4, PL e, 1 veya 2 kanallı çalışma, otomatik veya manuel, izlemeli başlatma, 3 etkinleştirme yolu, 1 sinyalleme akımı yolu, US = 24 ... 230V AC/DC, takılabilir vidalı terminal
| Product range | Electronic safety relays |
| Basic function | Emergency stop; emergency switching off Protective door Light curtain Feedback circuit |
| Mounting width | |
| Operation | 22.5 mm |
| Supply voltage [Us] | Automatic or manual start Start button monitoring |
| Safety related characteristics | 1-channel 2-channel |
| Enable current paths to IEC/EN 60204-1 Stop category 0 | 24 V DC 24 V AC, 50/60 Hz 24 V AC/DC - 230 V AC/DC, 50/60 Hz 115 V AC, 50/60 Hz 230 V AC, 50/60 Hz |
| Signal current paths | Cat. 4 PL e according to EN ISO 13849-1 SILCL 3 according to IEC 62061 SIL 3 according to IEC 61508 |
| Intended use | |
| Policies List | 3 |
| Standards | 1 |
| Dimensions (W x H x D) | |
| Mounting width | Safety relay for monitoring one or two-channel signal generators and control of actuators. If the sensor circuit is interrupted, the safety relay switches to safe mode. Module used to safely interrupt electrical circuits. |
| Weight | EMV 2004/108/EG, Maschinen 2006/42/EG |
| Mounting position | EN ISO 13849-1:2015, EN 62061:2005+A1:2013+A2:2015, EN 61508, Parts 1-7:2010, EN 50156-1:2015, Parts 1-2 EN 60947-5-1:2004+Cor:2005+A1:2009 |
| Mounting | 22.5 x 112.2 x 114.5 mm |
| Connection type | 22.5 mm |
| Operating conditions >Ambient temperature >Operation [ϑ] |
0,244 kg |
| Operating conditions >Ambient temperature >Storage [ϑ] |
As required |
| Operating conditions >Ambient temperature >Condensation |
Top-hat rail IEC/EN 60715, 35 mm |
| Operating conditions >Atmospheric conditions >relative humidity |
M3 screw terminals |
| Operating conditions >Atmospheric conditions >Air pressure (operation) |
-40 - +55 (observe derating) °C |
| Operating conditions >Atmospheric conditions >Altitude [Above sea level] |
-40 - +85 °C |
| Degree of protection to VDE 0470-1 >Enclosures |
Non-condensing |
| Degree of protection to VDE 0470-1 >Terminals |
Max. 75 % |
| Degree of protection to VDE 0470-1 >Degree of Protection |
795 - 1080 hPa |
| Insulation | 2000 m |
| Overvoltage category/pollution degree | |
| Stop category [according to EN60204-1] | IP20 |
| Technical safety parameters: >Values according to EN ISO 13849-1 >Performance level [according to EN ISO 13849-1] |
IP20 |
| Technical safety parameters: >Values according to EN ISO 13849-1 >Category [according to EN ISO 13849-1] |
Installation location: ≥ IP54 |
| Safety integrity level claim limit [in accordance with 62061] | 4 kV basic insulation between 23/24 and 33/34 enable signal current paths and 41/42 signaling current path 4 kV basic insulation between all current paths and enclosure Safe isolation 6 kV reinforced insulation between all other current paths |
| Safety integrity level [In accordance with IEC 61508] | III/2 |
| Probability of failure per hour [PFHd] | 0 |
| Prooftest High Demand | PL e |
| Demand level | Kat. 4 |
| Prooftest Low Demand | SILCL 3 |
| Lifetime | SIL 3 |
| Rated operational voltage [Ue] | 10 x 10-10 |
| Rated insulation voltage [Ui] | 240 Months |
| Quadratic summation current | < 12 Months |
| Notes | 56 Months |
| Minimum switching capacity | 240 Months |
| Pick-up time | 230 V AC |
| Reset time (K1, K2) for UN , normally [tR] | 250 V AC |
| Simultaneity for inputs 1/2 [tsync] | 72 A2 (ITH2 = I12 + I22 + … + IN2) A2 |
| Maximum switching frequency | Observe derating curve ￫ Engineering |
| Status indication | 0.05 W |
| Contact type >Non-delayed enable current paths |
|
| Contact type >Non-delayed signal current path |
at Ue in automatic mode: normally <150 at Ue in manual mode: normally <100 ms |
| Limiting continuous current | < 20 ms (when driven via the sensor circuits) ms |
| Short-circuit protection for output circuits, external | ∞ ms |
| Maximum breaking power >Resistive load (τ = 0 ms) >250 V AC |
1 Hz |
| Maximum breaking power >Inductive load (τ = 40 ms) >24 V DC |
Green LED |
| Maximum breaking power >Inductive load (τ = 40 ms) >48 V DC |
|
| Maximum breaking power >Inductive load (τ = 40 ms) >110 V DC |
3 |
| Maximum breaking power >Inductive load (τ = 40 ms) >220 V DC |
1 |
| Switching capacity >DC-13 >24 V |
perN/O: 6 A |
| Rated operational current for specified heat dissipation [In] | 6 A gL/gG |
| Heat dissipation per pole, current-dependent [Pvid] | 1500 VA |
| Equipment heat dissipation, current-dependent [Pvid] | 48 W |
| Static heat dissipation, non-current-dependent [Pvs] | 40 W |
| Heat dissipation capacity [Pdiss] | 35 W |
| Operating ambient temperature min. | 33 W |
| Operating ambient temperature max. | 5 A A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 A |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
2.7 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
2.9 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
-40 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
+55 °C |
| 10.3 Degree of protection of ASSEMBLIES | |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Model | Is the panel builder´s responsibility. |
| Suitable for monitoring of position switches | Is the panel builder´s responsibility. |
| Suitable for monitoring of emergency-stop circuits | Is the panel builder´s responsibility. |
| Suitable for monitoring of valves | Is the panel builder´s responsibility. |
| Suitable for monitoring of optoelectronic protection equipment | Is the panel builder´s responsibility. |
| Suitable for monitoring of tactile sensors | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Suitable for monitoring of magnetic switches | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Suitable for monitoring of proximity switches | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Type of electric connection | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Rail mounting possible | |
| Rated control supply voltage Us at AC 50HZ | |
| Rated control supply voltage Us at AC 60HZ | Basic device |
| Rated control supply voltage Us at DC | No |
| Voltage type for actuating | Yes |
| With detachable clamps | No |
| Evaluation inputs | Yes |
| With start input | No |
| With muting function | Yes |
| With feedback circuit | No |
| Release-delay | Screw connection |
| Number of outputs, safety related, undelayed, with contact | Yes |
| Number of outputs, safety related, delayed, with contact | 24 - 230 V |
| Number of outputs, safety related, undelayed, semiconductors | 24 - 230 V |
| Number of outputs, safety related, delayed, semiconductors | 24 - 230 V |
| Number of outputs, signalling function, undelayed, with contact | AC/DC |
| Number of outputs, signalling function, delayed, with contact | Yes |
| Number of outputs, signalling function, undelayed, semiconductors | One- and two-channel |
| Number of outputs, signalling function, delayed, semiconductors | Yes |
| Category according to EN 954-1 | No |
| Type of safety acc. IEC 61496-1 | Yes |
| Stop category acc. IEC 60204 | 0 - 0 s |
| Performance level acc. EN ISO 13849-1 | 0 |
| SIL according to IEC 61508 | 0 |
| With approval for TÜV | 0 |
| With approval for BG BIA | 0 |
| With approval according to UL | 0 |
| Width | 0 |
| Height | 0 |
| Depth | 0 |
| Product Standards | None |
| UL File No. | None |
| CSA File No. | 0 |
| North America Certification | Level e |
| Degree of Protection | 3 |
| Characteristic curve | No |
| Characteristic curve | No |
| Characteristic curve | Yes |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
