DMV-250/4/M4/P-G
6099273 DMV-250/4/M4/P-G
6099273

Yük ayırıcı, DMV, 250 A, 4 kutuplu, STOP fonksiyonu, gri düğmeli, 400 mm kontrol paneli derinliği için metal şaftlı, 9 mm bağlantı deliği
Yük ayırıcı, Ürün yelpazesi: Yük ayırıcı, Ana şalter, bakım şalteri, Parça grubu referansı: DMV, gri düğmeli, Notlar: 400 mm kontrol paneli derinliği için metal şaftlı, Sağlanan ekipmana ilişkin bilgiler: tarafından takılan yardımcı kontak kullanıcı., 4 kutuplu, Koruma Derecesi: Önden IP65, Tasarım: arkadan montaj, Motor gücü AC-23A, 50 - 60 Hz 400 V: P = 147 kW, Nominal kesintisiz akım: Iu = 250 A, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, IEC/EN 60947-3'e uygun yük ayırıcı

Product range	Switch-disconnector Main switch maintenance switch
Part group reference	DMV
Stop Function	STOP function
Information about equipment supplied	with grey knob
Notes	auxiliary contact fitted by user.
Number of poles	With metal shaft for a control panel depth of 400 mm
Notes	4 pole
Locking facility	0 N/O
Degree of Protection	0 N/C
Design	1 padlock, ∅ 5 mm
Contact sequence	Lockable in the 0 (Off) position
Switching angle	Front IP65
Function	rear mounting
400 V [P]
Rated uninterrupted current [Iu]
Note on rated uninterrupted current !u	90 °
Connection technique
Standards	147 kW
Certifications	250 A
Ambient temperature >Operation [ϑ]	Rated uninterrupted current Iu is specified for max. cross-section.
Ambient temperature >Storage [ϑ]	9 mm connection hole
Overvoltage category/pollution degree	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch-disconnector according to IEC/EN 60947-3
Rated impulse withstand voltage [Uimp]	CE, RoHs, KEMA, EAC, Lloyds
Rated insulation voltage [Ui ]	-25 - +55 °C
Mounting position	-30 - +80 °C
Mechanical variables >Number of poles	III/3
Mechanical variables >Auxiliary contacts 0 N/O Mechanical variables >Auxiliary contacts 0 N/C Electrical characteristics >Rated operational voltage [Ue]	8 kV
Electrical characteristics >Rated uninterrupted current [Iu]	1000 V
Electrical characteristics >Note on rated uninterrupted current !u	As required
Short-circuit rating >fuse	4 pole
Short-circuit rating >Rated conditional short-circuit current [Iq]	0 N/O
Short-circuit rating >Breaking current	0 N/C
Short-circuit rating >max. let-through energy	690 V AC
Rated short-time withstand current (1 s current) [Icw ]	250 A
Note on rated short-time withstand current lcw	Rated uninterrupted current Iu is specified for max. cross-section.
Heat dissipation per pole, current-dependent [Pvid]	500/250
Rated breaking capacity cos ϕ to IEC 60947-3 >400/415 V	In = 500: 50 In = 250: 100 kA
Rated breaking capacity cos ϕ to IEC 60947-3 >500 V	In = 500: 40 In = 250: 33 kA
Rated breaking capacity cos ϕ to IEC 60947-3 >690 V	In = 500: 1700 In = 250: 380 kA²s
Safe isolation to EN 61140 >Current heat loss per contact at Ie	12000 Arms
Lifespan, mechanical [Operations]	Current for a time of 0.3 seconds
AC >AC-21A >Rated operational current switch >400 V 415 V [Ie]	9 W
AC >AC-21A >Rated operational current switch >500 V [Ie]	2000 A
AC >AC-21A >Rated operational current switch >690 V [Ie]	1760 A
AC >AC-22A >Rated operational current switch >400 V 415 V [Ie]	1120 A
AC >AC-22A >Rated operational current switch >500 V [Ie]	3.75 W
AC >AC-22A >Rated operational current switch >690 V [Ie]	10000
AC >AC-23A >Rated operational current switch >400 V 415 V [Ie]	250 A
AC >AC-23A >Rated operational current switch >500 V [Ie]	250 A
AC >AC-23A >Rated operational current switch >690 V [Ie]	250 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >400 V 415 V [P]	250 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >500 V [P]	250 A
AC >AC-23A >Motor rating AC-23A, 50 - 60 Hz [P] >690 V [P]	250 A
Flat conductor connection with busbars	250 A
Terminal screw	220 A
Tightening torque for terminal screw	140 A
Notes	147 kW
Rated operational current for specified heat dissipation [In]	160 kW
Heat dissipation per pole, current-dependent [Pvid]	132 kW
Equipment heat dissipation, current-dependent [Pvid]	120 mm2
Static heat dissipation, non-current-dependent [Pvs]	M8 x 20
Heat dissipation capacity [Pdiss]	14 Nm
Operating ambient temperature min.	B10d values as per EN ISO 13849-1, table C1
Operating ambient temperature max.	250 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	9 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	-25 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+55 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	Is the panel builder´s responsibility.
Version as safety switch	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as emergency stop installation	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as reversing switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Max. rated operation voltage Ue AC	Yes
Rated operating voltage	Yes
Rated permanent current Iu	No
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	No
Rated operation power at AC-3, 400 V	1
Rated short-time withstand current lcw	690 V
Rated operation power at AC-23, 400 V	690 - 690 V
Switching power at 400 V	250 A
Conditioned rated short-circuit current Iq	250 A
Number of poles	250 A
Number of auxiliary contacts as normally closed contact	0 kW
Number of auxiliary contacts as normally open contact	12 kA
Number of auxiliary contacts as change-over contact	250 kW
Motor drive optional	250 kW
Motor drive integrated	50 kA
Voltage release optional	4
Device construction	0
Suitable for ground mounting	0
Suitable for front mounting 4-hole	0
Suitable for front mounting centre	No
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	Built-in device fixed built-in technique
Type of control element	Yes
Interlockable	No
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	Yes

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.