Değişken frekanslı sürücü, 400 V AC, 3 fazlı, 590 A, 315 kW, IP00, DC bağlantı bobini Frekans invertörü, Parça grubu referansı (örn. DIL): DG1, Nominal çalışma gerilimi: Ue = 400 V AC, 3 fazlı, 480 V AC, 3 fazlı, 500 V AC, 3 fazlı, Ve ile çıkış gerilimi: U2 = 400 V AC, 3 fazlı, 480 V AC, 3 fazlı, 500 V AC, 3 fazlı, Şebeke gerilimi (50/60Hz): ULN = 380 (-%15) - 500 (+%10) V, Nominal çalışma akımı %150 aşırı yükte: Ie = 590 A, Not: 1,5 - 6 kHz anahtarlama frekansı ve %150 aşırı yük için +50° C ortam sıcaklığı ve %110 aşırı yük için +40° C ortam sıcaklığı için nominal çalışma akımı , Nominal çalışma akımı %110 aşırı yükte: Ie = 650 A, Not: Her 600 saniyede 60 saniyelik aşırı yük döngüsü, Atanan motor değeri Not: normal dahili ve harici havalandırmalı 4 kutuplu, üç fazlı asenkron motorlar için, 1500 rpm-1'de 50 Hz veya 60 Hz'de 1800 dak-1, 400 V, 50 Hz'de her 600 saniyede 60 saniyelik aşırı yük döngüsü, Atanan motor gücü %150 Aşırı yük: P = 315 kW, %110 Aşırı yük: P = 355 kW, %150 Aşırı yük: IM = 550 A, %110 Aşırı yük: IM = 619 A, Atanan motor gücü Not: 500 V, 50 Hz'de, Atanan motor gücü %150 Aşırı yük: P = 400 kW, %110 Aşırı yük: P = 450 kW, 150 % Aşırı yük: IM = 547 A, %110 Aşırı yük: IM = 615 A, Atanan motor değeri Not: 480 V, 60 Hz'de, Atanan motor değeri %150 Aşırı yük: P = 500 HP, %110 Aşırı yük: P = 500 HP, Atanan motor değeri %150 Aşırı Yük: IM = 515 A, %110 Aşırı Yük: IM = 590 A, Koruma Derecesi: IP00, Arayüz/alan veriyolu (dahili): Modbus RTU, Modbus TCP, BACnet MS/TP, Ethernet IP , Fieldbus bağlantısı (opsiyonel): PROFIBUS, CANopen®, DeviceNet, SmartWire-DT, Şunlarla donatılmıştır: Radyo paraziti bastırma filtresi, Ek PCB koruması, Çok hatlı grafik ekran, DC bağlantı bobini, Çerçeve boyutu: FS8, Standartlar: Genel teknik özellikler gereksinimler: IEC/EN 61800-2, EMC gereksinimleri: IEC/EN 61800-3, Güvenlik gereksinimleri: IEC/EN 61800-5
Değişken frekanslı sürücü, 400 V AC, 3 fazlı, 590 A, 315 kW, IP00, DC bağlantı bobini
Frekans invertörü, Parça grubu referansı (örn. DIL): DG1, Nominal çalışma gerilimi: Ue = 400 V AC, 3 fazlı, 480 V AC, 3 fazlı, 500 V AC, 3 fazlı, Ve ile çıkış gerilimi: U2 = 400 V AC, 3 fazlı, 480 V AC, 3 fazlı, 500 V AC, 3 fazlı, Şebeke gerilimi (50/60Hz): ULN = 380 (-%15) - 500 (+%10) V, Nominal çalışma akımı %150 aşırı yükte: Ie = 590 A, Not: 1,5 - 6 kHz anahtarlama frekansı ve %150 aşırı yük için +50° C ortam sıcaklığı ve %110 aşırı yük için +40° C ortam sıcaklığı için nominal çalışma akımı , Nominal çalışma akımı %110 aşırı yükte: Ie = 650 A, Not: Her 600 saniyede 60 saniyelik aşırı yük döngüsü, Atanan motor değeri Not: normal dahili ve harici havalandırmalı 4 kutuplu, üç fazlı asenkron motorlar için, 1500 rpm-1'de 50 Hz veya 60 Hz'de 1800 dak-1, 400 V, 50 Hz'de her 600 saniyede 60 saniyelik aşırı yük döngüsü, Atanan motor gücü %150 Aşırı yük: P = 315 kW, %110 Aşırı yük: P = 355 kW, %150 Aşırı yük: IM = 550 A, %110 Aşırı yük: IM = 619 A, Atanan motor gücü Not: 500 V, 50 Hz'de, Atanan motor gücü %150 Aşırı yük: P = 400 kW, %110 Aşırı yük: P = 450 kW, 150 % Aşırı yük: IM = 547 A, %110 Aşırı yük: IM = 615 A, Atanan motor değeri Not: 480 V, 60 Hz'de, Atanan motor değeri %150 Aşırı yük: P = 500 HP, %110 Aşırı yük: P = 500 HP, Atanan motor değeri %150 Aşırı Yük: IM = 515 A, %110 Aşırı Yük: IM = 590 A, Koruma Derecesi: IP00, Arayüz/alan veriyolu (dahili): Modbus RTU, Modbus TCP, BACnet MS/TP, Ethernet IP , Fieldbus bağlantısı (opsiyonel): PROFIBUS, CANopen®, DeviceNet, SmartWire-DT, Şunlarla donatılmıştır: Radyo paraziti bastırma filtresi, Ek PCB koruması, Çok hatlı grafik ekran, DC bağlantı bobini, Çerçeve boyutu: FS8, Standartlar: Genel teknik özellikler gereksinimler: IEC/EN 61800-2, EMC gereksinimleri: IEC/EN 61800-3, Güvenlik gereksinimleri: IEC/EN 61800-5
| Product range | Variable frequency drives |
| Part group reference (e.g. DIL) | DG1 |
| Rated operational voltage [Ue] | 400 V AC, 3-phase 480 V AC, 3-phase 500 V AC, 3-phase |
| Output voltage with Ve [U2] | 400 V AC, 3-phase 480 V AC, 3-phase 500 V AC, 3-phase |
| Mains voltage (50/60Hz) [ULN] | 380 (-15%) - 500 (+10%) V |
| At 150% overload [Ie] | |
| At 110% overload [Ie] | 590 A |
| Note | 650 A |
| Note | Rated operational current for a switching frequency of 1.5 - 6 kHz and an ambient temperature of +50° C for a 150% overload and +40° C for a 110% overload |
| Note | |
| Note | for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz |
| 150 % Overload [P] | Overload cycle for 60 s every 600 s |
| 110 % Overload [P] | at 400 V, 50 Hz |
| 150 % Overload [IM] | 315 kW |
| 110 % Overload [IM] | 355 kW |
| Note | 550 A |
| 150 % Overload [P] | 619 A |
| 110 % Overload [P] | at 500 V, 50 Hz |
| 150 % Overload [IM] | 400 kW |
| 110 % Overload [IM] | 450 kW |
| Note | 547 A |
| 150 % Overload [P] | 615 A |
| 110 % Overload [P] | at 480 V, 60 Hz |
| 150 % Overload [IM] | 500 HP |
| 110 % Overload [IM] | 500 HP |
| Degree of Protection | 515 A |
| Interface/field bus (built-in) | 590 A |
| Fieldbus connection (optional) | IP00 |
| Fitted with | Modbus RTU Modbus TCP BACnet MS/TP Ethernet IP |
| Parameterization | PROFIBUS CANopen® DeviceNet SmartWire-DT |
| Frame size | Radio interference suppression filter Additional PCB protection Multi-line graphic display DC link choke |
| Connection to SmartWire-DT | Keypad Fieldbus Power Xpert inControl |
| Standards | FS8 |
| Certifications | yes in conjunction with DXG-NET-SWD SmartWire DT module |
| Production quality | |
| Climatic proofing [ρw] | Specification for general requirements: IEC/EN 61800-2 EMC requirements: IEC/EN 61800-3 Safety requirements: IEC/EN 61800-5 |
| Air quality | CE, UL, cUL, c-Tick, UkrSEPRO, EAC |
| Ambient temperature >Operating ambient temperature min. |
RoHS, ISO 9001 |
| Ambient temperature >Operating ambient temperature max. |
< 95%, average relative humidity (RH), non-condensing, non-corrosive % |
| Ambient temperature >operation (110 % overload) [ϑ] |
3C2, 3S2 |
| Ambient temperature | -10 °C |
| Ambient temperature >Storage [ϑ] |
+50 °C |
| Overvoltage category | -10 - +40 (max. +50 with 1% derating per Kelvin temperature increase) °C |
| Pollution degree | Operation with 150% overload (1 min./10 min.): -10 to +40 (max. +50 with 1% derating per Kelvin temperature increase) Operation with 150% overload (1 min./10 min.): -10 to +40 (max. +50 with 1% derating per Kelvin temperature increase) |
| Radio interference level >Radio interference class (EMC) |
-40 - +70 °C |
| Radio interference level >Environment (EMC) |
III |
| Radio interference level >maximum motor cable length [I] |
2 |
| Mechanical shock resistance | C1 (with external filter, for conducted emissions only), C2, C3, depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. |
| Vibration | 1st and 2nd environments as per EN 61800-3 |
| Mounting position | C2 ≤ 10 m C3 ≤ 50 m m |
| Altitude | EN 61800-5-1, EN 60068-2-27 UPS drop test (for weights inside the UPS frame) Storage and transportation: maximum 15 g, 11 ms (inside the packaging) g |
| Degree of Protection | EN 61800-5-1, EN 60068-2-6: 5 - 150 Hz Amplitude: 1 mm (peak) at 5 - 15.8 Hz Maximum acceleration amplitude: 1 g at 15.8 – 150 Hz |
| Protection against direct contact | Vertical |
| Supply >Rated operational voltage [Ue] |
0 - 1000 m above sea level Above 1000 m: 1% derating for every 100 m max. 3000 m (2000 m for Corner Grounded TN Systems) m |
| Supply >Mains voltage (50/60Hz) [ULN] |
IP00 |
| Supply >Input current (150% overload) [ILN] |
BGV A3 (VBG4, finger- and back-of-hand proof) |
| Supply >Input current (110% overload) [ILN] |
|
| Supply >System configuration |
400 V AC, 3-phase 480 V AC, 3-phase 500 V AC, 3-phase |
| Supply >Supply frequency [fLN] |
380 (-15%) - 500 (+10%) V |
| Supply >Frequency range [fLN] |
587 A |
| Supply >Mains switch-on frequency |
648 T |
| Supply >Mains current distortion [THD] |
TN-S, TN-C, TN-C-S, TT, IT |
| Supply >Rated conditional short-circuit current [Iq] |
50/60 Hz |
| Power section >Function |
45–66 (± 0%) Hz |
| Power section >Overload current (150% overload) [IL] |
Maximum of one time every 60 seconds |
| Power section >Overload current (110% overload) [IL] |
28 % |
| Power section >max. starting current (High Overload) [IH] |
< 65 kA |
| Power section >Note about max. starting current |
Variable frequency drive with internal DC link, DC link choke and IGBT inverter |
| Power section >Output voltage with Ve [U2] |
885 A |
| Power section >Output Frequency [f2] |
715 A |
| Power section >Switching frequency [fPWM] |
200 % |
| Power section >Operation Mode |
for 2 seconds every 20 seconds |
| Power section >Frequency resolution (setpoint value) [Δf] |
400 V AC, 3-phase 480 V AC, 3-phase 500 V AC, 3-phase |
| Power section >Rated operational current >At 150% overload [Ie] |
0 - 50/60 (max. 400) Hz |
| Power section >Rated operational current >At 110% overload [Ie] |
2 adjustable 1.5 - 6 kHz |
| Power section >Note |
U/f control Speed control with slip compensation sensorless vector control (SLV) Torque regulation |
| Power section >Motor current limit [I] |
0.01 Hz |
| Power section >Power loss >Heat dissipation at rated operational current Ie =110% [PV] |
590 A |
| Power section >Efficiency [η] |
650 A |
| Power section >Fan |
Rated operational current for a switching frequency of 1.5 - 6 kHz and an ambient temperature of +50° C for a 150% overload and +40° C for a 110% overload |
| Power section >Internal fan delivery rate |
0.1 - 2 x IH (CT) A |
| Power section >Fitted with |
8076 W |
| Power section >Safety function |
97.4 % |
| Power section >Frame size |
temperature controlled externally accessible |
| Motor feeder >Note |
2800 m3/h |
| Motor feeder >Note |
Radio interference suppression filter Additional PCB protection Multi-line graphic display DC link choke |
| Motor feeder >Note |
STO (Safe Torque Off, SIL1, PLc Cat 1) |
| Motor feeder >150 % Overload [P] |
FS8 |
| Motor feeder >110 % Overload [P] |
for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz |
| Motor feeder >Note |
Overload cycle for 60 s every 600 s |
| Motor feeder >150 % Overload [P] |
at 400 V, 50 Hz |
| Motor feeder >110 % Overload [P] |
315 kW |
| Motor feeder >Note |
355 kW |
| Motor feeder >150 % Overload [P] |
at 500 V, 50 Hz |
| Motor feeder >110 % Overload [P] |
400 kW |
| Motor feeder >maximum permissible cable length [I] |
450 kW |
| Motor feeder >Apparent power >Apparent power at rated operation 400 V [S] |
at 480 V, 60 Hz |
| Motor feeder >Apparent power >Apparent power at rated operation 480 V [S] |
500 HP |
| Motor feeder >Braking function >Standard braking torque |
500 HP |
| Motor feeder >Braking function >DC braking torque |
screened: 200 m |
| Motor feeder >Braking function >Braking torque with external braking resistance |
450.3 kVA |
| Motor feeder >Braking function >Switch-on threshold for the braking transistor [UDC] |
562.9 kVA |
| Motor feeder >Braking function >DC braking [%] |
max. 30 % MN |
| External control voltage [Uc] | adjustable to 150 % |
| Reference voltage [Us] | Max. 100% of rated operational current Ie with external braking resistor |
| Analog inputs | 850 V DC V |
| Analog outputs | ≦ 150, adjustable I/Ie |
| Digital inputs | |
| Digital outputs | 24 V DC (max. 250 mA options incl.) V |
| Relay outputs | 10 V DC (max. 10 mA) V |
| Interface/field bus (built-in) | 2, parameterizable, 0 - 10 V DC, 2 - 10 V DC, -10 - +10 V DC, 0/4 - 20 mA |
| Expansion slots | 2, parameterizable, 0 - 10 V, 0/4 - 20 mA |
| Power Wiring >Safety device (fuse or miniature circuit-breaker) >IEC (Type B, gG), 150 % |
8, parameterizable, max. 30 V DC |
| Power Wiring >Safety device (fuse or miniature circuit-breaker) >IEC (Type B, gG), 110 % |
1, parameterizable, 24 V DC |
| Power Wiring >Safety device (fuse or miniature circuit-breaker) >UL (Class CC or J) |
3, parameterizable, 2 changeover contacts and 1 N/O, 6 A (240 VAC) / 6 A (24 VDC) |
| Power Wiring >Mains contactor >150 % overload (CT/IH, at 50 °C) |
Modbus RTU Modbus TCP BACnet MS/TP Ethernet IP |
| Power Wiring >Mains contactor >110 % overload (VT/IL, at 40 °C) |
2 |
| Power Wiring >Main choke >150 % overload (CT/IH, at 50 °C) |
|
| Power Wiring >Main choke >110 % overload (VT/IL, at 40 °C) |
NZMN3-AE630 |
| Power Wiring >Radio interference suppression filter (external, 150 %) |
NZMN4-AE800 |
| Power Wiring >Radio interference suppression filter (external, 110 %) |
2 A |
| Power Wiring >Radio interference suppression filter, low leakage currents (external, 150 %) |
DILM500 |
| Power Wiring >Radio interference suppression filter, low leakage currents (external, 110 %) |
DILM500 |
| Power Wiring >Note regarding radio interference suppression filter |
Integrated DC link choke, uk = 5% |
| Motor feeder >Sine filter >150 % overload (CT/IH, at 50 °C) |
Integrated DC link choke, uk = 5% |
| Motor feeder >Sine filter >110 % overload (VT/IL, at 40 °C) |
DX-EMC34-750 |
| Rated operational current for specified heat dissipation [In] | DX-EMC34-750 |
| Equipment heat dissipation, current-dependent [Pvid] | DX-EMC34-750-L |
| Static heat dissipation, non-current-dependent [Pvs] | DX-EMC34-750-L |
| Operating ambient temperature min. | Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments |
| Operating ambient temperature max. | SIN-0600-5-0-P |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
SIN-0840-5-0-P |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
590 A |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
8076 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
215 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
-10 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+50 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| Mains voltage | Meets the product standard´s requirements. |
| Mains frequency | Does not apply, since the entire switchgear needs to be evaluated. |
| Number of phases input | Does not apply, since the entire switchgear needs to be evaluated. |
| Number of phases output | Meets the product standard´s requirements. |
| Max. output frequency | Does not apply, since the entire switchgear needs to be evaluated. |
| Max. output voltage | Meets the product standard´s requirements. |
| Nominal output current I2N | Does not apply, since the entire switchgear needs to be evaluated. |
| Max. output at quadratic load at rated output voltage | Is the panel builder´s responsibility. |
| Max. output at linear load at rated output voltage | |
| Relative symmetric net frequency tolerance | |
| Relative symmetric net voltage tolerance | 323 - 550 V |
| Number of analogue outputs | 50/60 Hz |
| Number of analogue inputs | 3 |
| Number of digital outputs | 3 |
| Number of digital inputs | 400 Hz |
| With control unit | 500 V |
| Application in industrial area permitted | 650 A |
| Application in domestic- and commercial area permitted | 355 kW |
| Supporting protocol for TCP/IP | 315 kW |
| Supporting protocol for PROFIBUS | 10 % |
| Supporting protocol for CAN | 10 % |
| Supporting protocol for INTERBUS | 2 |
| Supporting protocol for ASI | 2 |
| Supporting protocol for KNX | 1 |
| Supporting protocol for MODBUS | 8 |
| Supporting protocol for Data-Highway | Yes |
| Supporting protocol for DeviceNet | Yes |
| Supporting protocol for SUCONET | Yes |
| Supporting protocol for LON | Yes |
| Supporting protocol for PROFINET IO | Yes |
| Supporting protocol for PROFINET CBA | Yes |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | Yes |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | Yes |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for BACnet | Yes |
| Supporting protocol for other bus systems | No |
| Number of HW-interfaces industrial Ethernet | No |
| Number of interfaces PROFINET | No |
| Number of HW-interfaces RS-232 | Yes |
| Number of HW-interfaces RS-422 | No |
| Number of HW-interfaces RS-485 | No |
| Number of HW-interfaces serial TTY | No |
| Number of HW-interfaces USB | No |
| Number of HW-interfaces parallel | No |
| Number of HW-interfaces other | Yes |
| With optical interface | Yes |
| With PC connection | 1 |
| Integrated breaking resistance | 0 |
| 4-quadrant operation possible | 0 |
| Type of converter | 0 |
| Degree of protection (IP) | 1 |
| Degree of protection (NEMA) | 0 |
| Height | 0 |
| Width | 0 |
| Depth | 1 |
| UL File No. | No |
| Suitable for | Yes |
| Max. Voltage Rating | No |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
