DDC-630/2
6098946 DDC-630/2
6098946

DC yük ayırıcı, 630 A, 2 kutuplu, 2 N/A, 2 N/C, gri düğmeli, servis dağıtım panosu montajı
DC anahtar ayırıcı, Ürün yelpazesi: DC anahtar ayırıcı, Ana anahtar, bakım anahtarı, Parça grubu referansı: DDC, gri düğmeli, Sağlanan ekipmanla ilgili bilgiler: kullanıcı tarafından takılan yardımcı kontak., 2 kutuplu, Koruma Derecesi: IP20, Tasarım : servis dağıtım panosu montajı, Nominal kesintisiz akım: Iu = 630 A, Standartlar: IEC/EN 60947, VDE 0660, IEC/EN 60204, IEC/EN 60947-3'e uygun yük ayırıcı

Product range	DC switch-disconnector Main switch maintenance switch
Part group reference	DDC
Information about equipment supplied	with grey knob
Number of poles	auxiliary contact fitted by user.
Degree of Protection	2 pole
Design	2 N/O
Rated uninterrupted current [Iu]	2 N/C
Note on rated uninterrupted current !u	IP20
Standards	service distribution board mounting
Certifications
Ambient temperature >Operation [ϑ]	630 A
Ambient temperature >Storage [ϑ]	Rated uninterrupted current Iu is specified for max. cross-section.
Overvoltage category/pollution degree	IEC/EN 60947, VDE 0660, IEC/EN 60204 Switch-disconnector according to IEC/EN 60947-3
Rated impulse withstand voltage [Uimp]	CE, RoHs
Rated insulation voltage [Ui ]	-25 - +55 °C
Mounting position	-30 - +80 °C
Mechanical variables >Number of poles	III/3
Mechanical variables >Auxiliary contacts 2 N/O Mechanical variables >Auxiliary contacts 2 N/C Electrical characteristics >Rated uninterrupted current [Iu]	12 kV
Electrical characteristics >Note on rated uninterrupted current !u	1200 V
Rated short-time withstand current (1 s current) [Icw ]	As required
Note on rated short-time withstand current lcw	2 pole
Rated short-circuit making capacity [Icm]	2 N/O
Heat dissipation per pole, current-dependent [Pvid]	2 N/C
Lifespan, mechanical [Operations]	630 A
DC >Utilization category DC­21B >Rated operational current switch >480 V [Ie]	Rated uninterrupted current Iu is specified for max. cross-section.
DC >Utilization category DC­21B >Rated operational current switch >600 V [Ie]	15000 Arms
DC >Utilization category DC­21B >Rated operational current switch >1000 V [Ie]	Current for a time of 1 second
Solid	25 kAeff
Flat conductor connection with busbars	97 W
Terminal screw	10000
Tightening torque for terminal screw	630 A
Rated operational current for specified heat dissipation [In]	630 A
Heat dissipation per pole, current-dependent [Pvid]	630 A
Equipment heat dissipation, current-dependent [Pvid]	2 x 185 mm2
Static heat dissipation, non-current-dependent [Pvs]	2 x (40 x 5) mm2
Heat dissipation capacity [Pdiss]	M10
Operating ambient temperature min.	20 Nm
Operating ambient temperature max.	630 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	97 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	-25 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+55 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Version as main switch	Is the panel builder´s responsibility.
Version as maintenance-/service switch	Is the panel builder´s responsibility.
Version as safety switch	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Version as emergency stop installation	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as reversing switch	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of switches	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Max. rated operation voltage Ue AC	Yes
Rated operating voltage	Yes
Rated permanent current Iu	No
Rated permanent current at AC-23, 400 V	No
Rated permanent current at AC-21, 400 V	No
Rated operation power at AC-3, 400 V	1
Rated short-time withstand current lcw	0 V
Rated operation power at AC-23, 400 V	1000 - 1000 V
Switching power at 400 V	630 A
Conditioned rated short-circuit current Iq	0 A
Number of poles	0 A
Number of auxiliary contacts as normally closed contact	0 kW
Number of auxiliary contacts as normally open contact	15 kA
Number of auxiliary contacts as change-over contact	0 kW
Motor drive optional	0 kW
Motor drive integrated	0 kA
Voltage release optional	2
Device construction	0
Suitable for ground mounting	0
Suitable for front mounting 4-hole	0
Suitable for front mounting centre	No
Suitable for distribution board installation	No
Suitable for intermediate mounting	No
Colour control element	Built-in device fixed built-in technique
Type of control element	Yes
Interlockable	No
Type of electrical connection of main circuit	No
Degree of protection (IP), front side	No
Degree of protection (NEMA)	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.