S4AO is a module of 4 analog outputs dedicated to convert digital data sent by means of the MODBUS protocol to standard DC (voltage or current) signals. See video The output signals are divided into 2 sets of 2 outputs, which are isolated from one another. RS-485 and USB ports are isolated from output signals and the supply. The module setting can be easily done through USB or one of the RS-485 interfaces using the free eCon program. The main advantages which distinguish our product from other products of the same kind possibility to connect a number modules through RS485 in order to increase the number of analog outputs. 2 independent RS-485 ports with Modbus protocol (possibility to work as Master/Slave). master Modbus function dedicated to read out data from other RS-485 devices and to scale analog value. slave Modbus function to set the signal on analog outputs. output work time counter for values above and below a certain threshold. the module can be programmed through USB without the need to connect the power supply. The module has modular design and is dedicated to be mounted on the S-type rail acc. to EN 62208 ( module’s width is equal to 3 standard modules). It is perfect to be mounted in a switchboard cabinets.
S4AO is a module of 4 analog outputs dedicated to convert digital data sent by means of the MODBUS protocol to standard DC (voltage or current) signals.
The output signals are divided into 2 sets of 2 outputs, which are isolated from one another. RS-485 and USB ports are isolated from output signals and the supply.
The module setting can be easily done through USB or one of the RS-485 interfaces using the free eCon program.
The main advantages which distinguish our product from other products of the same kind
The module has modular design and is dedicated to be mounted on the S-type rail acc. to EN 62208 ( module’s width is equal to 3 standard modules). It is perfect to be mounted in a switchboard cabinets.