ZEB32-45-GF
136493 ZEB32-45-GF
136493

Aşırı yük rölesi, Doğrudan montaj, Toprak arıza koruması: ile, Ir= 9 - 45 A, 1 N/O, 1 N/C
Aşırı yük rölesi, Ürün yelpazesi: Elektronik aşırı yük röleleri ZEB, Faz hatası duyarlılığı: IEC/EN 60947, VDE 0660 Bölüm 102, Açıklama: Test/kapama düğmesi, Sıfırlama düğmesi, Manuel/otomatik sıfırlama seçilebilir, Yük altında başlatma durumunda koruma (sınıf 10 - sınıf 20), Montaj tipi: Doğrudan montaj, Yardımcı kontaklar N/O = Normalde açık: 1 N/O, Yardımcı kontaklar N/C = Normalde kapalı: 1 N/C, Şunlarla kullanım için: DILM17, DILM25, DILM32, DILM38, DIULM17, DIULM25, DIULM32, SDAINLM30, SDAINLM45, SDAINLM55, Standartlar: IEC/EN 60947, VDE 0660, UL, CSA, Koruma Derecesi: IP20

Product range	Electronic overload relays ZEB
Phase-failure sensitivity	IEC/EN 60947, VDE 0660 Part 102
Description	Test/off button Reset pushbutton Manual/auto reset selectable Protection in the case of starting under load (class 10 to class 20)
Mounting type	Direct mounting
Earth-fault protection
Trip at approx.	with
Overload releases [Ir ]	> 0.5 x Ir in 2 s > 1.5 x Ir in 1 s
Contact sequence
N/O = Normally open	9 - 45 A
N/C = Normally closed
For use with
Explosion protection (according to ATEX 94/9/EC)	1 N/O
EC-prototype test certification	1 N/C
Standards	DILM17 DILM25 DILM32 DILM38 DIULM17 DIULM25 DIULM32 SDAINLM30 SDAINLM45 SDAINLM55
Climatic proofing
Ambient temperature >Open	II(2)GD [Ex d] [Ex e] [Ex tb]
Ambient temperature >Ambient temperature open max.	SIRA 13 ATEX 9348X
Ambient temperature >Enclosed >Ambient temperature enclosed max.
Mechanical shock resistance	IEC/EN 60947, VDE 0660, UL, CSA
Degree of Protection	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Protection against direct contact when actuated from front (EN 50274)	-25 - +65 °C
Altitude	65 °C
Rated impulse withstand voltage [Uimp]	65 °C
Overvoltage category/pollution degree	15 Shock duration 10 ms according to IEC 60068-2-27 g
Rated insulation voltage [Ui ]	IP20
Rated operational voltage [Ue]	Finger and back-of-hand proof
Rated frequency [f]	Max. 2000 m
Safe isolation to EN 61140 >Between auxiliary contacts and main contacts
Safe isolation to EN 61140 >Between main circuits	6000 V AC
Terminal capacities >Solid	III/3
Terminal capacities >Solid or stranded	690 V AC
Stripping length	690 V AC
Rated impulse withstand voltage [Uimp]	50/60 Hz
Overvoltage category/pollution degree	600 V AC
Terminal capacities >Solid	600 V AC
Terminal capacities >Flexible with ferrule	1 x 1.5 - 16 mm2
Terminal capacities >Solid or stranded	1 x 14 - 4 AWG
Terminal screw	13 mm
Tightening torque
Tightening torque	6000 V
Stripping length	III/3
Tools >Pozidriv screwdriver	2 x (0.75 - 4) mm2
Tools >Standard screwdriver	2 x (0.75 - 2.5) mm2
Rated insulation voltage [Ui ]	2 x (18 - 12) AWG
Rated operational voltage [Ue ]	M3.5
Safe isolation to EN 61140 >between the auxiliary contacts	0.8 - 1.2 Nm
Conventional thermal current [Ith ]	7 lb-in
Rated operational current [Ie ] >AC-15 >Make contact >120 V [Ie ]	8 mm
Rated operational current [Ie ] >AC-15 >Make contact >220 V 230 V 240 V [Ie ]	2 Size
Rated operational current [Ie ] >AC-15 >Make contact >380 V 400 V 415 V [Ie ]	1 x 6 mm
Rated operational current [Ie ] >AC-15 >Make contact >500 V [Ie ]	500 V AC
Rated operational current [Ie ] >AC-15 >Break contact >120 V [Ie ]	500 V AC
Rated operational current [Ie ] >AC-15 >Break contact >220 V 230 V 240 V [Ie ]	240 V AC
Rated operational current [Ie ] >AC-15 >Break contact >380 V 400 V 415 V [Ie ]	5 A
Rated operational current [Ie ] >AC-15 >Break contact >500 V [Ie ]	1.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms	1.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >24 V [Ie ]	0.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >60 V [Ie ]	0.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >110 V [Ie ]	1.5 A
Rated operational current [Ie ] >DC L/R ≦ 15 ms >220 V [Ie ]	1.5 A
Short-circuit rating without welding >max. fuse	0.9 A
Auxiliary contacts >Pilot Duty >AC operated	0.8 A
Auxiliary contacts >Pilot Duty >DC operated	Switch-on and switch-off conditions based on DC-13, time constant as specified.
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	0.9 A
Short Circuit Current Rating >600 V High Fault >max. Fuse	0.75 A
Rated operational current for specified heat dissipation [In]	0.4 A
Heat dissipation per pole, current-dependent [Pvid]	0.2 A
Equipment heat dissipation, current-dependent [Pvid]	6 A gG/gL
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss]	B600
Operating ambient temperature min.	R300
Operating ambient temperature max.	100 kA
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	60 Class J A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	45 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	1.43 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	4.3 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-25 °C
10.3 Degree of protection of ASSEMBLIES	+65 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Adjustable current range	Does not apply, since the entire switchgear needs to be evaluated.
Mounting method	Is the panel builder´s responsibility.
Type of electrical connection of main circuit	Is the panel builder´s responsibility.
Number of auxiliary contacts as normally closed contact	Is the panel builder´s responsibility.
Number of auxiliary contacts as normally open contact	Is the panel builder´s responsibility.
Number of auxiliary contacts as change-over contact	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 50HZ	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Release class	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Voltage type for actuating
Reset function automatic
Reset function input	9 - 45 A
Reset function push-button	Direct attachment
Product Standards	Screw connection
UL File No.	1
UL Category Control No.	1
CSA File No.	0
CSA Class No.	0 - 0 V
North America Certification	0 - 0 V
Specially designed for North America	0 - 0 V
Suitable for	Adjustable
Max. Voltage Rating	Self powered
Degree of Protection	Yes
Characteristic curve	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.