Dağıtım kabini, YxGxD=2000x400x800mm, IP55 Çerçeve, arka panel, kapı, tavan kapalı, montaj plakası 3 mm, çok parçalı alt plakalar, kaldırma halkaları, çift uçlu kilit
Dağıtım kabini, YxGxD=2000x400x800mm, IP55
Çerçeve, arka panel, kapı, tavan kapalı, montaj plakası 3 mm, çok parçalı alt plakalar, kaldırma halkaları, çift uçlu kilit
| Product range | Control centres XVTL |
| Basic function | Combination enclosures |
| Single unit/Complete unit | Complete housing |
| Degree of Protection | IP55 (with door and flange) |
| Description | Fragment basic equipment Including open cable entries top, prepared for F3A flange |
| Material | Sheet steel 2 mm |
| Surface finish | Polyester powder coating Phosphated RAL 7035, light grey |
| Colour | light gray (RAL 7035) |
| Information about equipment supplied | including frame, sheet steel doors, back plate, bottom and top plate, mounting plate, lifting eyelets, cylinder lock and branding strip Including support frame for the IVS mounting units including insulating surround and mounted insulated support bracket Without side walls |
| Width | 425 mm |
| Height | 2000 mm |
| Depth | 800 mm |
| Standards | IEC/EN 60439-1 IEC/EN 60439-3 IEC/EN 62208 |
| Protection class | 1 |
| Installation conditions | 40 °C (intermittent maximum value) 35 °C (maximum value, 24 h average) -5 °C (minimum value) |
| Degree of Protection | Indoor installation |
| Relative humidity | IP55 (with door and flange) |
| Power loss >Max. admissible heat dissipation, ambient air temperature +35 °C |
50% (at 40°C) |
| Weight | 505 W |
| Material | 88 kg |
| Surface treatment | Sheet steel 2 mm |
| Surface finish | Painting, phosphated and polyester powder coating |
| Colour | Polyester powder coating Phosphated RAL 7035, light grey |
| Material characteristics >Type Door |
light gray (RAL 7035) |
| Material characteristics >door opening angle |
Outside-supported doors with hidden hinges Can be removed from 90° |
| Material characteristics >Door interlock |
120° (single mounting) 120° (combination mounting) |
| Mechanical >Cable entry |
Folding handle with espagnolette lock Can be fitted with profile cylinder Three-point interlock |
| Electrical >Rated insulation voltage [Ui ] |
Various covers allow cable entry from above and/or below |
| Electrical >Rated operational voltage [Ue ] |
690 V |
| Electrical >Rated frequency [f] |
415 V |
| Electrical >Rated impulse withstand voltage [Uimp] |
50 (AC) Hz |
| Electrical >Rated operational current [Ie] |
6 kV |
| Electrical >Overvoltage category/pollution degree |
2500 A |
| Electrical >Rated short-time withstand current (t=1s) [Icw ] |
IV/3 |
| Electrical >Rated peak withstand current [Ipk ] |
65 kA |
| Electrical >Max. admissible heat dissipation, ambient air temperature +35 °C |
143 kA |
| Electrical >Earthings |
505 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure, free-standing [PV] |
Screw M10: 50 x 106 A2s (base frame, main earthing) Taptite screw M6: 3.9 × 106 A2s (enclosure side plate, back plate) M6 weld stud: 50 × 106 A2s (door) |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure, free-standing [PV] |
241 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure, free-standing [PV] |
216 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
196 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
232 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
211 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure, free-standing [PV] |
187 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure, free-standing [PV] |
484 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure, free-standing [PV] |
433 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
393 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
466 W |
| Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
423 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
375 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Not applicable. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Not applicable. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Not relevant to indoor installations. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Met; assembled and secured as per the latest applicable instruction leaflet. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
IK10 |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | IP55 |
| 10.5 Protection against electric shock | Is the panel builder´s responsibility. |
| 10.6 Incorporation of switching devices and components | < 0.1 Ω; meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Ui = 690 V AC |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
6 kV |
| 10.10 Temperature rise | Does not apply to metal enclosures. |
| 10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Width | Meets the product standard´s requirements. |
| Height | 425 mm |
| Depth | 2000 mm |
| Material | 800 mm |
| Material quality | Steel |
| Surface finishing | Other |
| Colour | Powder coating |
| RAL-number | Grey |
| With mounting plate | 7035 |
| Mounting plate depth-adjustable | Yes |
| Number of locks | No |
| Floor installation possible | 1 |
| Wall fastening possible | Yes |
| Wall build in | Yes |
| Pole fastening | No |
| Tackable | No |
| Number of doors | Yes |
| Suitable for metrical mounting | 1 |
| Suitable for outdoor set-up | Yes |
| Pitched roof | No |
| EMC-version | No |
| With glazed door | Yes |
| With ventilation door | No |
| With backside door | No |
| Impact strength | No |
| Degree of protection (IP) | IK10 |
| Degree of protection (NEMA) | IP55 |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
