Dijital giriş kartı XI/ON ECO, 24 V DC, 8DI XI/ON standart I/O sistemi, XI/ON I/O sistemine maliyet ve alan açısından optimize edilmiş I/O modülleri ve ağ geçitleri ekler. ECO modülleri temel modüllere ihtiyaç duymaz ve standart XI/ON sistemiyle tamamen uyumludur. Yüksek kanal yoğunluğu (13 mm'de 16 DI/DO'ya kadar), itmeli yaylı terminaller, modül başına 8 veya 16 kanal. ECO ağ geçitleri CANopen veri yolu sistemleri Profibus DP ve Ethernet'i destekler.
Dijital giriş kartı XI/ON ECO, 24 V DC, 8DI
XI/ON standart I/O sistemi, XI/ON I/O sistemine maliyet ve alan açısından optimize edilmiş I/O modülleri ve ağ geçitleri ekler. ECO modülleri temel modüllere ihtiyaç duymaz ve standart XI/ON sistemiyle tamamen uyumludur. Yüksek kanal yoğunluğu (13 mm'de 16 DI/DO'ya kadar), itmeli yaylı terminaller, modül başına 8 veya 16 kanal. ECO ağ geçitleri CANopen veri yolu sistemleri Profibus DP ve Ethernet'i destekler.
Function | I/O modules |
Function | Digital input modules |
Short Description | XNE Slice module |
Standards | 8 Digital inputs, 24 V DC Positive switching |
Potential isolation | |
Ambient temperature >Ambient temperature, operation |
EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
Ambient temperature >Storage, transport [ϑ] |
Yes, through optocoupler |
Relative humidity >Relative humidity |
0 - +55 °C |
Ambient conditions, mechanical >Degree of Protection |
-25 - +85 °C |
Ambient conditions, mechanical >Harmful gases |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
Vibration resistance, operating conditions | IP20 |
Mechanical shock resistance | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC/EN 60068-2-6 |
Drop and topple | according to IEC 60068-2-27 g |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-29 |
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
Electromagnetic compatibility (EMC) >Burst |
EN 61000-4-2 kV |
Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-2 V/m |
Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-4 |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-5 |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 61100-4-6 V |
Electromagnetic compatibility (EMC) >Type test |
EN 55016-2-3 dB |
Approvals | EN 61131-2 |
Other technical data (sheet catalogue) | to EN 61131-2 |
Rated data | CE, cULus |
Connection design in TOP direction | Technical Data |
Stripping length | |
Clamping range | according to VDE 0611 Part 1/8.92 / IEC/EN 60947-7-1 |
Connectable conductors >"e" solid H07V-U |
Push-In spring-cage terminals |
Connectable conductors >"f" flexible H 07V-K |
8 mm |
Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
max. 0.14 - 1.5 mm2 |
Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
Connectable conductors >"e" solid H07V-U |
0.25 - 1.5 mm2 |
Connectable conductors >"f" flexible H 07V-K |
0.25 - 1.5 mm2 |
Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 0.75 mm2 |
Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
Gauge pin IEC/EN 60947-1 | 0.25 - 1.5 mm2 |
Channels | 0.25 - 1.5 mm2 |
Rated voltage through supply terminal [UL ] | 0.25 - 0.75 mm2 |
Rated current consumption from supply terminal [IL ] | A1 |
Rated current consumption from module bus [IMB ] | |
Heat dissipation | 8 Number |
Base modules >without C connection |
24 V DC |
Channels | 1.5 mA |
Rated voltage through supply terminal [UL ] | ≦ 15 mA |
Rated current consumption from supply terminal [IL ] | < 1.5 W |
Rated current consumption from module bus [IMB ] | Already built in |
Heat dissipation | |
Base modules >without C connection |
8 Number |
Channels | 24 V DC |
Rated voltage through supply terminal [UL ] | 1.5 mA |
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | ≦ 15 mA |
Rated current consumption from module bus [IMB ] | < 1.5 W |
Channels | Already built in |
Rated voltage through supply terminal [UL ] | |
Rated current consumption from supply terminal [IL ] | 8 Number |
Rated current consumption from module bus [IMB ] | 24 V DC |
Rated insulation voltage [Ui] | 1.5 mA |
Heat dissipation | ≦ 15 mA |
Input voltage >Nominal input voltage [Ue] |
|
Input voltage >Low level [UeL] |
8 Number |
Input voltage >High level [UeH] |
24 V DC |
Input current >Low level⁄active level [IeL] |
1.5 mA |
Input current >High level⁄active level [IeH] |
≦ 15 mA |
Input delay >tRising edge |
500 V AC |
Input delay >tFalling edge |
< 1.5 W |
Base modules >without C connection |
24 V DC V DC |
Rated voltage through supply terminal [UL ] | -UL - +5 V V |
Rated current consumption from supply terminal [IL ] | 11 - 30 V V |
Rated current consumption from module bus [IMB ] | -1 mA - 1.5 mA mA |
Base modules >without C connection |
2 mA - 5 mA mA |
Rated voltage through supply terminal [UL ] | < 100 µs |
Rated current consumption from supply terminal [IL ] | < 200 µs |
Rated current consumption from module bus [IMB ] | Already built in |
Channels | |
Rated voltage through supply terminal [UL ] | 24 V DC |
Rated current consumption from supply terminal [IL ] | 1.5 mA |
Rated current consumption from module bus [IMB ] | ≦ 15 mA |
Heat dissipation | Already built in |
Input voltage >Nominal input voltage [Ue] |
|
Input voltage >Low level [UeL] |
24 V DC |
Input voltage >High level [UeH] |
1.5 mA |
Input current >Low level [IeL] |
≦ 15 mA |
Input current >High level [IeH] |
|
Rated voltage through supply terminal [UL ] | 8 Number |
Rated current consumption from supply terminal [IL ] | 24 V DC |
Rated current consumption from module bus [IMB ] | 1.5 mA |
Rated operational current for specified heat dissipation [In] | ≦ 15 mA |
Heat dissipation per pole, current-dependent [Pvid] | < 1.5 W |
Equipment heat dissipation, current-dependent [Pvid] | |
Static heat dissipation, non-current-dependent [Pvs] | 24 V DC V DC |
Heat dissipation capacity [Pdiss] | -UL - +5 V V |
Operating ambient temperature min. | 11 - 30 V V |
Operating ambient temperature max. | -1 mA - 1.5 mA mA |
Degree of Protection | 2 mA - 5 mA mA |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
24 V DC |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
1.5 mA |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
≦ 15 mA |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
10.2 Strength of materials and parts >10.2.5 Lifting |
The supply terminal (UL) supplies power for the card´s electronics and for the sensors at the inputs. The total current required for each card is the sum of all partial currents. Part of the XI/ON card’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL). Max. permissible capacity: 141 nF at 79 V AC/50 Hz; 23 nF at 265 V AC/50 Hz |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
10.2 Strength of materials and parts >10.2.7 Inscriptions |
0 A |
10.3 Degree of protection of ASSEMBLIES | 0 W |
10.4 Clearances and creepage distances | 0 W |
10.5 Protection against electric shock | 1.5 W |
10.6 Incorporation of switching devices and components | 0 W |
10.7 Internal electrical circuits and connections | 0 °C |
10.8 Connections for external conductors | +55 °C |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
IP20 |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
|
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Meets the product standard´s requirements. |
10.11 Short-circuit rating | Meets the product standard´s requirements. |
10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
10.13 Mechanical function | Meets the product standard´s requirements. |
Supply voltage AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
Supply voltage AC 60 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
Supply voltage DC | Meets the product standard´s requirements. |
Voltage type of supply voltage | Meets the product standard´s requirements. |
Number of digital inputs | Meets the product standard´s requirements. |
Number of digital outputs | Does not apply, since the entire switchgear needs to be evaluated. |
Digital inputs configurable | Does not apply, since the entire switchgear needs to be evaluated. |
Digital outputs configurable | Is the panel builder´s responsibility. |
Input current at signal 1 | Is the panel builder´s responsibility. |
Permitted voltage at input | Is the panel builder´s responsibility. |
Type of voltage (input voltage) | Is the panel builder´s responsibility. |
Type of digital output | Is the panel builder´s responsibility. |
Output current | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Permitted voltage at output | Is the panel builder´s responsibility. |
Type of output voltage | Is the panel builder´s responsibility. |
Short-circuit protection, outputs available | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Number of HW-interfaces industrial Ethernet | |
Number of interfaces PROFINET | |
Number of HW-interfaces RS-232 | 0 - 0 V |
Number of HW-interfaces RS-422 | 0 - 0 V |
Number of HW-interfaces RS-485 | 18 - 30 V |
Number of HW-interfaces serial TTY | DC |
Number of HW-interfaces parallel | 8 |
Number of HW-interfaces Wireless | 0 |
Number of HW-interfaces USB | No |
Number of HW-interfaces other | No |
With optical interface | 2 mA |
Supporting protocol for TCP/IP | 30 - 30 V |
Supporting protocol for PROFIBUS | DC |
Supporting protocol for CAN | None |
Supporting protocol for INTERBUS | 0 A |
Supporting protocol for ASI | 0 - 0 V |
Supporting protocol for KNX | DC |
Supporting protocol for MODBUS | No |
Supporting protocol for Data-Highway | 0 |
Supporting protocol for DeviceNet | 0 |
Supporting protocol for SUCONET | 0 |
Supporting protocol for LON | 0 |
Supporting protocol for PROFINET IO | 0 |
Supporting protocol for PROFINET CBA | 0 |
Supporting protocol for SERCOS | 0 |
Supporting protocol for Foundation Fieldbus | 0 |
Supporting protocol for EtherNet/IP | 0 |
Supporting protocol for AS-Interface Safety at Work | 1 |
Supporting protocol for DeviceNet Safety | No |
Supporting protocol for INTERBUS-Safety | No |
Supporting protocol for PROFIsafe | Yes |
Supporting protocol for SafetyBUS p | Yes |
Supporting protocol for other bus systems | No |
Radio standard Bluetooth | No |
Radio standard WLAN 802.11 | No |
Radio standard GPRS | No |
Radio standard GSM | No |
Radio standard UMTS | No |
IO link master | No |
System accessory | No |
Degree of protection (IP) | No |
Type of electric connection | No |
Time delay at signal exchange | No |
Fieldbus connection over separate bus coupler possible | No |
Rail mounting possible | No |
Wall mounting/direct mounting | No |
Front build in possible | No |
Rack-assembly possible | No |
Suitable for safety functions | No |
Category according to EN 954-1 | No |
SIL according to IEC 61508 | Yes |
Performance level acc. EN ISO 13849-1 | No |
Appendant operation agent (Ex ia) | No |
Appendant operation agent (Ex ib) | No |
Explosion safety category for gas | No |
Explosion safety category for dust | No |
Width | No |
Height | Yes |
Depth | IP20 |
Product Standards | Screw-/spring clamp connection |
UL File No. | 0 - 0 ms |
UL Category Control No. | Yes |
CSA File No. | Yes |
CSA Class No. | No |
North America Certification | No |
Specially designed for North America | No |
Current Limiting Circuit-Breaker | No |
Degree of Protection | None |
Link to sheet catalogue | None |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.