XC-152-E3-11
167850 XC-152-E3-11
167850

Kompakt PLC, 24 V DC, Ethernet, RS232, SWDT
Kompakt PLC serisi XC150, modern kontrol mimarisini ve kapsamlı iletişim arayüzlerini tek bir cihazda birleştirir. Ethernet'e ek olarak çeşitli arayüz kombinasyonları sağlarlar (Profibus-DP, CANopen, RS485, RS232, SmartWire-DT). Yalın Otomasyon çözümleri için XC150, SmartWire-DT'ye doğrudan arayüz oluşturma özelliği sunar ve böylece anahtarlama cihazı seviyesinde iletişime olanak tanır. Programlama IEC 61131'e (CoDeSys) göre gerçekleştirilir. tüm XC150 kontrolörleri entegre bir web sunucusuyla donatılmıştır.

Product range	SmartWire-DT coordinators
Function	With SmartWire-DT master interface Additional field bus interfaces Ethernet Web-server OPC Server Remote Server
Operating system	Windows CE 5.0 (licence incl.)
PLC-licence	CoDeSys Runtime (licence inclusive)
Integrated Web server	yes
Built-in interfaces	1 x Ethernet 10/100 Mbps 1 x USB device 2.0 1 x USB host 2.0 1 x RS232 1 x SmartWire-DT
Slots	for SD card: 1
Application/marker/retain data	64 MB/4 KB/32 KB
Standards	EN 61131, UL 508
Approvals >Approvals	CE, cULus EAC
Approvals >shipping classification	DNV GL
Approvals
Ambient temperature	0 - +55 °C
Storage [ϑ]	-20 - +60 °C
Degree of Protection	IP20
Battery (service life)	non-replaceable, BR2330 soldered in
Weight	0.47 kg
Supply voltage	24 V DC
Permissible range [Ue]	20.4 - 28.8 V DC
Maximum power loss [Pv]	8.5 W
Note on heat dissipation	Heat dissipation with power consumption for 24 V 6 W for basic device + 2.5 W for USB module
Processor	RISC CPU, 32 Bit, 400 MHz
Program code/program data	64MB
Cycle time for 1 k of instructions (Bit, Byte)	Normally 0.04 ms
Basic interfaces >Ethernet >Profile	FTP SMTP HTTP TCP UDP IP
Basic interfaces >Ethernet >Data transfer rate	100Base-TX 10Base-T MBit/s
Basic interfaces >Ethernet >Potential isolation	500 Vr.m.s.
Basic interfaces >Ethernet >Programming interface	yes
Basic interfaces >Ethernet >Connections	RJ45
Basic interfaces >USB >USB Host	USB 2.0
Basic interfaces >USB >Potential isolation	None
Basic interfaces >USB >USB device	USB 2.0
Basic interfaces >USB >Potential isolation	None
additional interfaces >PROFIBUS	–
additional interfaces >CAN	–
additional interfaces >SmartWire-DT	✓
additional interfaces >SmartWire-DT >Profile	SmartWire-DT
additional interfaces >SmartWire-DT >Data transfer rate	max. 250 kbit/s
additional interfaces >SmartWire-DT >Potential isolation	None
additional interfaces >SmartWire-DT >Module	99 Count
additional interfaces >SmartWire-DT >Connections	Blade terminal SWD4-8MF2
additional interfaces >RS485	✓
additional interfaces >RS485 >Connections	9-pin D-sub (plug)
additional interfaces >RS232	✓
additional interfaces >RS232 >Data transfer rate	max. 57.6 kbit/s
additional interfaces >RS232 >Potential isolation	None
additional interfaces >RS232 >Connections	9-pin D-sub (plug)
RTC (real-time clock)	yes
Rated operational current for specified heat dissipation [In]	0 A
Heat dissipation per pole, current-dependent [Pvid]	0 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	6 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	0 °C
Operating ambient temperature max.	+55 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Contains function building blocks	Yes
Contains basic device	Yes
Contains module rack	No
Contains power supply	Yes
Contains analogue input module	No
Contains analogue output module	No
Contains digital input module	No
Contains digital output module	No
Contains function module	Yes
Contains technology module	Yes
Contains communication module	Yes
Contains memory unit	Yes
Contains simulation module	No
Contains connection cable	No
Contains control unit	No
Contains monitor	No
Contains programming software	No
Contains engineering software	Yes
Contains visualization	Yes
Contains libraries	Yes
Contains documentation	Yes
Contains other components	Yes
Software preinstalled	No
Product Standards	UL508, cULus; IEC/EN 61131-2, CE
UL File No.	E205091
UL Category Control No.	NRAQ
CSA File No.	UL report applies to US and Canada
CSA Class No.	-
North America Certification	UL listed, certified by UL for use in Canada
Degree of Protection	IEC:IP20, UL/CSA Tape: open type

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.