Eaton-WBLED-GE12
055714 WBLED-GE12

Eaton Kumanda butonları, Pako şalter, Sinyal lambası, Kumanda kutuları & Joystik Eaton-WBLED-GE12

Multiple LED 12V, W2x4.6d, 45mA, yellowRMQ-16 EATON LED light elements e.g., as a replacement or for converting to LED technology.

Multiple LED 12V, W2x4.6d, 45mA, yellow
RMQ-16 EATON LED light elements e.g., as a replacement or for converting to LED technology.

Product range	Accessories
Basic function accessories	Multiple LED
Single unit/Complete unit	Single unit
Type	For AC/DC
Lifespan to EN 60064 at t_a = +25 °C [t_mean (AC)]	12 V/24 mA
Connection to SmartWire-DT	60000 h
Rated operational current for specified heat dissipation [I_n]
Heat dissipation per pole, current-dependent [P_vid]	no
Equipment heat dissipation, current-dependent [P_vid]	0 A
Static heat dissipation, non-current-dependent [P_vs]	0 W
Heat dissipation capacity [P_diss]	0 W
Operating ambient temperature min.	0.29 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	-25 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	+60 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Colour	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Luminous flux	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Nominal voltage	Yellow
Voltage type	0 lm
Nominal current	12 V
Power consumption	DC
Diameter	45 mA
Length	0.29 W
Beam angle	0 mm
Energy efficiency class	0 mm
Weighted energy consumption in 1,000 hours	360 °
Average nominal lifespan	Not applicable
North America Certification	270 kWh