STN0,1(230/230)
204940 STN0,1(230/230)
204940

Kontrol transformatörü, 230 V, 0,1 kVA
Kontrol transformatörü, Ürün yelpazesi: Tek fazlı kontrol transformatörleri ST..., Temel fonksiyon: Tek fazlı STN kontrol transformatörleri, Nominal çıkış gerilimi: 230 V, Nominal güç: 0,1 kVA

Product range	Single-phase control transformers ST...
Basic function	Single-phase STN control transformers
Rated output voltage	230 V
Rated power	0.1 kVA
Terminal diagram / contact assignment
Cu factor	0,30 kg
Separate windings	●
Note	The following applies for the no-load loss, short-circuit loss (copper losses), short-circuit voltage and efficiency values: all details relate to a temperature of 20 °C
No-load losses	7 W
Short-circuit losses	15 W
Rated operational current for specified heat dissipation [In]	0 A
Heat dissipation per pole, current-dependent [Pvid]	0 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	22 W
Heat dissipation capacity [Pdiss]	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Built as safety transformer	No
Built as isolating transformer	No
Built as energy saving transformer	No
Primary voltage 1	230 - 230 V
Primary voltage 2	0 - 0 V
Primary voltage 3	0 - 0 V
Primary voltage 4	0 - 0 V
Primary voltage 5	0 - 0 V
Primary voltage 6	0 - 0 V
Primary voltage 7	0 - 0 V
Primary voltage 8	0 - 0 V
Primary voltage 9	0 - 0 V
Primary voltage 10	0 - 0 V
Secondary voltage 1	230 - 230 V
Secondary voltage 2	0 - 0 V
Secondary voltage 3	0 - 0 V
Secondary voltage 4	0 - 0 V
Secondary voltage 5	0 - 0 V
Secondary voltage 6	0 - 0 V
Secondary voltage 7	0 - 0 V
Secondary voltage 8	0 - 0 V
Secondary voltage 9	0 - 0 V
Secondary voltage 10	0 - 0 V
Rated apparent power	100 VA
Type of insulation material acc. IEC 85	B
Short-circuit-proof	No
Relative short circuit voltage	10 %
Width	85 mm
Height	91 mm
Depth	75 mm
Degree of protection (IP)	IP00
Ring core	No
Suitable for mounting on PCB	No
Modular version	No
Conductor material	Copper

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.