Yumuşak yol verici, 135 A, 200 - 600 V AC, Us= 24 V DC, kontrol üniteli, Çerçeve boyutu R Yumuşak yol verici, Açıklama: Dahili bypass kontaklı, Fonksiyon: Üç fazlı yükler için yumuşak yol verici, kontrol üniteli, Şebeke besleme gerilimi (50/60 Hz): ULN= 200 - 600 V AC, Besleme gerilimi: Us= 24 V DC , Kontrol voltajı: UC= 24 V DC, 400 V, 50 Hz'de atanan motor gücü (Standart bağlantı, Hat içi): P= 75 kW, 460 V, 60 Hz'de: P= 100 HP, Nominal çalışma akımı AC- 53: Ie= 135 A, Nominal çalışma akımı AC-53, In-Delta: Ie= 234 A, Başlatma sınıfı: CLASS 10 (yıldız-üçgen değişimi), CLASS 20 (45 s için ağır çalıştırma görevi 3 x Ie), CLASS 30 (30 s için 6 x Ie), Nominal çalışma gerilimi: Ue= 200 V, 230 V, 400 V, 480 V, 600 V, SmartWire-DT'ye bağlantı: hayır, Çerçeve boyutu: R, Standartlar: IEC/EN 60947 -4-2, UL 508, CSA22.2-14-1995, GB14048
Yumuşak yol verici, 135 A, 200 - 600 V AC, Us= 24 V DC, kontrol üniteli, Çerçeve boyutu R
Yumuşak yol verici, Açıklama: Dahili bypass kontaklı, Fonksiyon: Üç fazlı yükler için yumuşak yol verici, kontrol üniteli, Şebeke besleme gerilimi (50/60 Hz): ULN= 200 - 600 V AC, Besleme gerilimi: Us= 24 V DC , Kontrol voltajı: UC= 24 V DC, 400 V, 50 Hz'de atanan motor gücü (Standart bağlantı, Hat içi): P= 75 kW, 460 V, 60 Hz'de: P= 100 HP, Nominal çalışma akımı AC- 53: Ie= 135 A, Nominal çalışma akımı AC-53, In-Delta: Ie= 234 A, Başlatma sınıfı: CLASS 10 (yıldız-üçgen değişimi), CLASS 20 (45 s için ağır çalıştırma görevi 3 x Ie), CLASS 30 (30 s için 6 x Ie), Nominal çalışma gerilimi: Ue= 200 V, 230 V, 400 V, 480 V, 600 V, SmartWire-DT'ye bağlantı: hayır, Çerçeve boyutu: R, Standartlar: IEC/EN 60947 -4-2, UL 508, CSA22.2-14-1995, GB14048
| Description | With internal bypass contacts |
| Function | Soft starter for three-phase loads, with control unit |
| Mains supply voltage (50/60 Hz) [ULN] | 200 - 600 V AC |
| Supply voltage [Us] | 24 V DC |
| Control voltage [UC] | 24 V DC |
| at 400 V, 50 Hz [P] | |
| at 460 V, 60 Hz [P] | 75 kW |
| AC-53 [Ie] | 100 HP |
| AC-53, In-Delta [Ie] | |
| Startup class | 135 A |
| Rated operational voltage [Ue] | 234 A |
| Connection to SmartWire-DT | CLASS 10 (star-delta replacement) CLASS 20 (heavy starting duty 3 x Ie for 45 s) CLASS 30 (6 x Ie for 30 s) |
| Frame size | 200 V 230 V 400 V 480 V 600 V |
| Standards | no |
| Approvals | R |
| Approvals | |
| Climatic proofing | IEC/EN 60947-4-2 UL 508 CSA22.2-14-1995 GB14048 |
| Ambient temperature >Operation [ϑ] |
CE |
| Ambient temperature >Storage [ϑ] |
UL CSA C-Tick CCC |
| Altitude | Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-10 |
| Mounting position | -30 - +50 °C |
| Degree of protection >Degree of Protection |
-50 - +70 °C |
| Degree of protection >Integrated |
0 - 2000 m, above that each 100 m 0.5% Derating m |
| Protection against direct contact | As required |
| Overvoltage category/pollution degree | IP20 (terminals IP00) |
| Shock resistance | Protection type IP40 can be achieved on all sides with covers SS-IP20-N. |
| Radio interference level (IEC/EN 55011) | Finger- and back-of-hand proof |
| Static heat dissipation, non-current-dependent [Pvs] | II/3 |
| Weight | 15 g |
| Rated operating voltage [Ue] | A |
| Supply frequency [fLN] | 55 W |
| Rated operational current [Ie
] >AC-53, In-Delta [Ie] |
4.8 kg |
| Rated operational current [Ie
] >AC-53 [Ie] |
|
| Assigned motor rating (Standard connection, In-Line) >at 230 V, 50 Hz [P] |
200 - 600 V AC |
| Assigned motor rating (Standard connection, In-Line) >at 400 V, 50 Hz [P] |
50/60 Hz |
| Assigned motor rating (Standard connection, In-Line) >at 500 V, 50 Hz [P] |
234 A |
| Assigned motor rating (Standard connection, In-Line) >at 200 V, 60 Hz [P] |
135 A |
| Assigned motor rating (Standard connection, In-Line) >at 230 V, 60 Hz [P] |
37 kW |
| Assigned motor rating (Standard connection, In-Line) >at 460 V, 60 Hz [P] |
75 kW |
| Assigned motor rating (Standard connection, In-Line) >at 600 V, 60 Hz [P] |
90 kW |
| Assigned motor rating (delta connection) >at 230 V, 50 Hz [P] |
40 HP |
| Assigned motor rating (delta connection) >at 400 V, 50 Hz [P] |
50 HP |
| Assigned motor rating (delta connection) >at 500 V, 50 Hz [P] |
100 HP |
| Assigned motor rating (delta connection) >at 230 V, 60 Hz |
125 HP |
| Assigned motor rating (delta connection) >at 480 V, 60 Hz |
75 kW |
| Assigned motor rating (delta connection) >at 600 V, 60 Hz [P] |
132 kW |
| Overload cycle to IEC/EN 60947-4-2 >AC-53a |
160 kW |
| Overload cycle to IEC/EN 60947-4-2 >Internal bypass contacts |
75 HP |
| Short-circuit rating >Type “1” coordination |
150 HP |
| Cable lengths >Solid |
200 HP |
| Cable lengths >Flexible with ferrule |
135 A: AC-53a: 4.0 - 32: 99 - 3 |
| Cable lengths >Stranded |
✓ |
| Cable lengths >Solid or stranded |
NZMN2-S160 |
| Cable lengths >Tightening torque |
|
| Cable lengths >Screwdriver (PZ: Pozidriv) |
1 x (2.5 - 95) mm2 |
| Control cables >Solid |
1 x (2.5 - 95) mm2 |
| Control cables >Flexible with ferrule |
1 x (2.5 - 95) mm2 |
| Control cables >Stranded |
1 x (14 - 4/0) AWG |
| Control cables >Solid or stranded |
11.3 Nm |
| Control cables >Tightening torque |
4 mm Hexagon socket-head screw mm |
| Control cables >Screwdriver |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
| Digital inputs >Control voltage >DC-operated |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
| Digital inputs >Current consumption 24 V >External 24 V |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
| Digital inputs >Current consumption 24 V >External 24 V (no-load) |
7 x (12 - 14) 2 x (12 - 14) AWG |
| Digital inputs >Pick-up voltage >DC-operated |
0.4 Nm |
| Digital inputs >Drop-out voltage [x Us ] >DC operated >Drop-out voltage, DC-operated, max. |
0,6 x 3,5 mm |
| Digital inputs >Pick-up time >DC operated |
|
| Digital inputs >Drop-out time >DC operated |
24 V DC +10 %/- 10 % V DC |
| Regulator supply >Voltage [Us] |
150 mA |
| Regulator supply >Current consumption [Ie] |
100 mA |
| Regulator supply >Current consumption at peak performance (close bypass) at 24 V DC [IPeak] |
21.6 - 26.4 V DC |
| Regulator supply >Notes |
3 V DC |
| Analog inputs >Number of current inputs |
100 ms |
| Analog inputs >Current input |
100 ms |
| Relay outputs >Number |
24 V DC +10 %/- 10 % V |
| Relay outputs >of which programmable |
1000 mA |
| Relay outputs >Voltage range |
10/150 A/ms |
| Relay outputs >AC-11 current range |
External supply voltage |
| Ramp times >Acceleration >Ramp time, max. |
1 |
| Ramp times >Deceleration |
4 - 20 mA |
| Start voltage (= turn-off voltage) >Start voltage, max. |
2 |
| Start pedestal >Start voltage, max. |
2 |
| Kickstart >Voltage >Kickstart voltage, max. |
120 V AC/DC V AC |
| Kickstart >Duration >50 Hz >Kickstart Duration 50 Hz max. |
3 A, AC-11 A |
| Kickstart >Duration >60 Hz >Kickstart Duration 60 Hz max. |
|
| Fields of application >Fields of application |
180 s |
| Fields of application >3-phase motors |
0 - 60 s |
| Fast switching (semiconductor contactor) | 85 % |
| Soft start function | 85 % |
| Reversing starter | 100 % |
| Suppression of closing transients | 2000 ms |
| Current limitation | 2000 ms |
| Overload monitoring | Soft starting of three-phase asynchronous motors |
| Underload monitoring | ✓ |
| Fault memory | |
| Suppression of DC components for motors | - (minimum ramp time 1s) |
| Potential isolation between power and control sections | ✓ |
| Communication Interfaces | External solution required (reversing contactor) |
| Rated operational current for specified heat dissipation [In] | ✓ |
| Heat dissipation per pole, current-dependent [Pvid] | ✓ |
| Equipment heat dissipation, current-dependent [Pvid] | ✓ |
| Static heat dissipation, non-current-dependent [Pvs] | ✓ |
| Heat dissipation capacity [Pdiss] | 10 Faults |
| Operating ambient temperature min. | ✓ |
| Operating ambient temperature max. | ✓ |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Modbus RTU |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
135 A |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
55 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
55 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
-30 °C |
| 10.3 Degree of protection of ASSEMBLIES | +50 °C |
| 10.4 Clearances and creepage distances | |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Rated operation current Ie at 40 °C Tu | Does not apply, since the entire switchgear needs to be evaluated. |
| Rated operating voltage Ue | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inline, at 230 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inline, at 400 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inside delta, at 230 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inside delta, at 400 V | Is the panel builder´s responsibility. |
| Function | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Internal bypass | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| With display | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Torque control | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Rated surrounding temperature without derating | |
| Rated control supply voltage Us at AC 50HZ | |
| Rated control supply voltage Us at AC 60HZ | 135 A |
| Rated control supply voltage Us at DC | 200 - 600 V |
| Voltage type for actuating | 37 kW |
| Integrated motor overload protection | 75 kW |
| Release class | 75 kW |
| Degree of protection (IP) | 132 kW |
| Degree of protection (NEMA) | Single direction |
| Product Standards | Yes |
| UL File No. | Yes |
| UL Category Control No. | No |
| CSA File No. | 50 °C |
| CSA Class No. | 0 - 0 V |
| North America Certification | 0 - 0 V |
| Suitable for | 24 - 24 V |
| Max. Voltage Rating | DC |
| Degree of Protection | Yes |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
