alt
alt

PXS24S-e6/F/ORT-IT
PXS24S06A001 PXS24S-e6/F/ORT-IT
PXS24S06A001

24V DC için elektronik aşırı akım koruması, tetiklenmiş sinyal çıkışı, kontrol girişi ve besleme terminalleri ile sabit 6A 24V DC sistemler için güvenilir modüler elektronik aşırı akım koruması, basit bara çözümü, sabit veya değişken amperajlar, isteğe bağlı olarak kontrol girişi ve tetiklenmiş mesaj çıkışı, 3 yüke kadar geçmeli terminaller (+ 24V ve 0V), sağlam tasarım, lokal ve ( isteğe bağlı) uzaktan kontrol edilebilir

24V DC için elektronik aşırı akım koruması, tetiklenmiş sinyal çıkışı, kontrol girişi ve besleme terminalleri ile sabit 6A
24V DC sistemler için güvenilir modüler elektronik aşırı akım koruması, basit bara çözümü, sabit veya değişken amperajlar, isteğe bağlı olarak kontrol girişi ve tetiklenmiş mesaj çıkışı, 3 yüke kadar geçmeli terminaller (+ 24V ve 0V), sağlam tasarım, lokal ve ( isteğe bağlı) uzaktan kontrol edilebilir

Basic function Automation engineering 24V
Number of channels 1
Protection Electronic
Rated current [In] 6 A
Rated operating voltage [Un] 24 V
Standard/Approval in Arbeit
Operational voltage [UB] 24 DC (16 .. 30V DC)
Rated operational current fix [IN] 6 A
Overload current and short-circuit current trip Type 1.3 x IN with active current limitation
Trip time for electronic trip 170 ms
Capacitive loads Up to 20,000 µF
Inductive loads Up to 13 A
Width 17.5 mm
Depth 119.2 mm
Terminals
>Input terminals
3x LINE (+) and 3x GND (-)
Terminals
>Output Terminals
3x LOAD (+) and 3x GND (-)
Terminals
>Terminal type:
Push in terminals
Terminals
>Terminal capacity
2.5 (flexible with ferrules)
4 (rigid) mm²
Communication connector
>Communication connector
Two remote signaling outputs (internally connected to each other)
Two remote signaling inputs (internally connected to each other)
1x GND
Communication connector
>Terminal type:
Push in terminals
Communication connector
>Terminal capacity
0.75 (flexible with ferrule)
1.5 (rigid) mm²
Communication connector
>Remote signaling output
Triggered
Via communication connector (conforming to IEC 61131-2), class: 0.1 A
Type1/Type2 and Type3
Digital inputs
A max. of 30 PXS24V can be connected simultaneously
External signal sources up to 0.2 A@24 V (EATON RMQ series, etc.)
Communication connector
>Remote control input
On/Off/Reset
Via communication connector (conforming to IEC 61131-2), type 1/type 3
A max. of 30 PXS24V can be connected simultaneously
Communication connector
>Sequential control
Via communication connector
Busbars LINE (+) and GND (-); max 60A in various lengths of up to 1m
Mounting snap-fit on mounting rail TH35 (EN 60715)
Status LED Two-colored
Green = OK; Red = Triggered
OFF = Channel not in operation
Slide switch On/Off/Reset
Text field 17,5 x 6 mm
Degree of Protection IP20
Ambient temperature -30 - +55 °C
Permissible storage and transport temperatures -40 - +100 °C
Base dimension 92.5 mm
Rated operational current for specified heat dissipation [In] 6 A
Equipment heat dissipation, current-dependent [Pvid] 0.9 W
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Is the panel builder´s responsibility.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Is the panel builder´s responsibility.
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electric connection Plug-in connection
With detachable clamps No
Single-phase under current possible No
Three-phase under current possible No
Single-phase over current possible No
Three-phase over current possible No
Single-phase hysteresis possible No
Three-phase hysteresis possible No
Contains function DC-voltage under current No
Contains function DC-voltage over current Yes
Function DC-current hysteresis No
Rated control supply voltage Us at AC 50HZ 0 - 0 V
Rated control supply voltage Us at AC 60HZ 0 - 0 V
Rated control supply voltage Us at DC 16 - 30 V
Voltage type for actuating DC
Current measurement range 0 - 7.8 A
Min. adjustable delay-on energization time 0 s
Max. permitted delay-on energization time 0 s
Min. adjustable off-delay time 0 s
Max. permitted off-delay time 0 s
Number of contacts as normally closed contact 0
Number of contacts as normally open contact 1
Number of contacts as change-over contact 0
External current transformer No
Width 18 mm
Height 93 mm
Depth 127 mm

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

PXS24-BB/80A/12TE
Eaton
PXS24-BB/80A/4TE
Eaton
PXS24-BB/80A/1m
Eaton
PXS24S-e16/F/ORT
Eaton
PXS24S-e13/F/ORT
Eaton
PXS24S-e13/F/ORT-IT
Eaton
PXS24S-e10/F/ORT-IT
Eaton
PXS24S-e8/F/ORT
Eaton
PXS24S-e8/F/ORT-IT
Eaton
PXS24S-e6/F/ORT-IT
Eaton