Güç kaynağı ünitesi, 1 fazlı, 100-240VAC/24VDC, 10A Güç kaynağı ünitesi, Ürün yelpazesi: Güç kaynakları PSG, Alt seri: güç kaynağı ünitesi, Açıklama: 5 saniye boyunca 1,5 kat nominal çalışma akımıyla güç artışı, PELV (EN 60204), SELV (EN 60950), Genişlik: 85 mm, Yükseklik: 121 mm, Derinlik: 124,1 mm, Tek fazlı, Giriş voltaj aralığı: 85 - 264 V AC, (120 - 375 V DC), Nominal giriş voltajı: 100 - 240 V AC, 125 - 250 V DC, Nominal çıkış voltajı: 24 V DC (± %2), Nominal çıkış akımı: 10 A, Çıkış voltajı için ayar aralığı: 24 - 28 V DC, Nominal çıkış gücü: 240 W, Koruma derecesi: IP20, Isı dağılımı: 30 W
Güç kaynağı ünitesi, 1 fazlı, 100-240VAC/24VDC, 10A
Güç kaynağı ünitesi, Ürün yelpazesi: Güç kaynakları PSG, Alt seri: güç kaynağı ünitesi, Açıklama: 5 saniye boyunca 1,5 kat nominal çalışma akımıyla güç artışı, PELV (EN 60204), SELV (EN 60950), Genişlik: 85 mm, Yükseklik: 121 mm, Derinlik: 124,1 mm, Tek fazlı, Giriş voltaj aralığı: 85 - 264 V AC, (120 - 375 V DC), Nominal giriş voltajı: 100 - 240 V AC, 125 - 250 V DC, Nominal çıkış voltajı: 24 V DC (± %2), Nominal çıkış akımı: 10 A, Çıkış voltajı için ayar aralığı: 24 - 28 V DC, Nominal çıkış gücü: 240 W, Koruma derecesi: IP20, Isı dağılımı: 30 W
| Product range | Power supplies PSG |
| Subrange | power supply unit |
| Description | Power Boost via 1.5-fold rated operational current for 5 s PELV (EN 60204), SELV (EN 60950) |
| Phases | Single-phase |
| Input voltage range | 85 - 264 V AC (120 - 375 V DC) |
| Nominal input voltage | 100 - 240 V AC 125 - 250 V DC |
| Rated output voltage | 24 V DC (± 2%) |
| Rated output current | 10 A |
| Setting range for the output voltage | 24 - 28 V DC |
| Rated output power | 240 W |
| Nominal input voltage | |
| Input voltage range | 100 - 240 V AC 125 - 250 V DC |
| Supply frequency >Rated value |
85 - 264 V AC 120 - 375 V DC V |
| Supply frequency >Range |
50/60 Hz |
| Nominal current [In ] | 47 - 63 Hz |
| Inrush current limitation I²t (+25 °C) | < 2.5 bei 115 V AC < 1.3 bei 230 V AC A |
| Mains buffering at nominal load >Mains failure bridging |
< 35 A at 115 V AC < 35 A at 230 V AC A |
| Run-up time after mains voltage applied | > 20 at 115 V AC > 125 at 230 V AC ms |
| Internal input fuse (device protection, not accessible) | < 1000 ms |
| Back-up fuse | T4 AH/250 V |
| Tripping characteristic | 10, 16 A (recommended) |
| Leakage Current | B |
| Short-term interruption | < 1 mA at 240 V AC |
| Rated output power | 100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start |
| Rated output voltage | |
| Tolerance | 240 W |
| Setting range for the output voltage | 24 V DC (± 2%) |
| Derating from Tamb > +50 °C | ±2 % |
| Capacitive load starting | 24 - 28 V DC |
| Heat dissipation | > 50 °C (2.5% / °C) |
| Efficiency | Max 10000 µF |
| Residual ripple and switching peaks | 30 W |
| Can be switched in parallel | > 90 at 115 V AC & 230 V AC % |
| Housing | < 50 mVpp / < 150 mVpp |
| Status indication | for redundancy, with O ring diode (PSG480R24RM/PSG960R24RM) |
| MTBF (mean time between failures) | |
| Height | Aluminium |
| Width | green LED for "DC OK" |
| Depth | > 500,000 h |
| Weight | 121 mm |
| Terminations | 85 mm |
| Stripping length | 124.1 mm |
| Terminal capacity >flexible with ferrules/solid |
1.1 kg |
| Tightening torque | Screw terminal, pluggable |
| Ambient air temperature range >Operation |
7 mm |
| Ambient air temperature range >Storage, transport [ϑ] >Storage [ϑ] |
1.3 - 2.1 mm² (AWG 16 - 14) mm2 |
| damp heat | 0.5 Nm |
| Vibrations (IEC/EN 60068-2-6) | -20 - +80 (> 50 °C derating) °C |
| Mechanical shock resistance (IEC 60068-2-27) | -25 - +85 °C |
| Pollution degree | < 95 % relative humidity at +25 °C, no condensation |
| Climatic class (IEC) | 10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions |
| Transient overvoltage protection | 30 g (300 m/s²) in all directions |
| Current limitation at short-circuit | 2 |
| Overvoltage protection | 3K3 according to EN 60721 |
| Insulation voltage >Input/Output |
|
| Insulation voltage >Input/PE |
Varistor |
| Insulation voltage >Output/PE |
IÜberstrom = 150 % der max. Ausgangsleistung |
| Degree of Protection | Yes, against internal overvoltage |
| Protection class | 4 kV AC (type test), 3 kV AC (routine test) |
| Approvals | 1.5 kV AC (type test), 1.5 kV AC (routine test) |
| Static heat dissipation, non-current-dependent [Pvs] | 1.5 kV AC (type test), 500 V AC (routine test) |
| Operating ambient temperature min. | IP20 |
| Operating ambient temperature max. | Class I with PE connection |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Electrical equipment of machines: IEC60204-1 (Overvoltage category III) Equipping power installations with electronic apparatus: EN 50178/IEC 62103 Safety extra-low voltage: PELV (EN 60204), SELV (EN 60950) Protection against electric shock: DIN 57100-410 CE: according to EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU RoHS-compliant: RoHS Directive 2011/65/EU ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024 Industrial: EN 55011 Mains harmonics limitation: EN 601000-3-2 Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1 UL508 Class2: UL/c-UL recognized to UL1310 and CSA C22.2 No. 223 | Component power supply unit for general use: EN61204-3 |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
EAC |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
30 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
-20 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+80 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Voltage type of supply voltage | Is the panel builder´s responsibility. |
| 1st secondary output voltage | Is the panel builder´s responsibility. |
| 2nd secondary output voltage | Is the panel builder´s responsibility. |
| 3rd secondary output voltage | Is the panel builder´s responsibility. |
| Max. output current 1 | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Max. output current 2 | Is the panel builder´s responsibility. |
| Max. output current 3 | Is the panel builder´s responsibility. |
| Secondary voltage adjustable | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Nominal value output voltage 1 | |
| Nominal value output voltage 2 | |
| Nominal value output voltage 3 | AC |
| Nominal value output current 1 | 24 - 28 V |
| Nominal value output current 2 | 0 - 0 V |
| Nominal value output current 3 | 0 - 0 V |
| Short-circuit-proof | 10 A |
| Rated supply voltage at AC 50 Hz | 0 A |
| Rated supply voltage at AC 60 Hz | 0 A |
| Rated supply voltage at DC | Yes |
| Output voltage stabilized | 24 V |
| Power consumption | 0 V |
| Power output | 0 V |
| Stabilized | 10 A |
| Type of electric connection | 0 A |
| Rail mounting possible | 0 A |
| Wall mounting possible | Yes |
| Modular version | 85 - 264 V |
| Width in number of modular spacings | 85 - 264 V |
| Built-in width | 0 - 0 V |
| Built-in height | Yes |
| Direct mounting possible | 299 VA |
| Width | 240 W |
| Height | Yes |
| Depth | Screw connection |
| Suitable for safety functions | Yes |
| SIL according to IEC 61508 | No |
| Performance level acc. EN ISO 13849-1 | Yes |
| Degree of protection (IP) | 0 |
| Degree of protection (NEMA) | 85 mm |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
