PN1-160
281235 PN1-160
281235

Yük ayırıcı 3p, 160A
Yük ayırıcı PN..-.. topraklanmış IT ağları için bile izolasyon özelliklerine uygundur. Köprü kitleri, bağlantı terminalleri ve kapı birleştirme döner kolları gibi aksesuarlar, çok çeşitli dağıtım sistemlerinde bireysel kuruluma olanak sağlar. PN parça no. uzak işlevler için uygun değildir. Notlar: IEC/EN 60204 ve VDE 0113'e göre pozitif sürücü dahil ana anahtar özellikleri. IEC/EN 60947-3 ve VDE 0660'a göre izolasyon özellikleri. VDE 0160 Bölüm 100'e göre bara etiket örtüsü.

Product range	Switch-disconnectors
Protective function	Disconnectors/main switches
Standard/Approval	IEC
Installation type	Fixed
Construction size	PN1
Description	Main switch characteristics including positive drive to IEC/EN 60204 and VDE 0113. Isolating characteristics to IEC/EN 60947-3 and VDE 0660. Busbar tag shroud to VDE 0160 Part 100.
Number of poles	3 pole
Standard equipment	Box terminal
Switch positions	I, 0
Rated current = rated uninterrupted current [In = Iu]	160 A
Short-circuit protection max. fuse gL-characteristic	160 A gL
Standards	IEC/EN 60947
Protection against direct contact	Finger and back-of-hand proof to DIN EN 50274/VDE 0106 part 110
Climatic proofing	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Ambient temperature, storage	- 40 - + 70 °C
Ambient temperature >Operation	-25 - +70 °C
Mechanical shock resistance (10 ms half-sinusoidal shock) according to IEC 60068-2-27	20 (half-sinusoidal shock 20 ms) g
Safe isolation to EN 61140 >Between auxiliary contacts and main contacts	500 V AC
Safe isolation to EN 61140 >between the auxiliary contacts	300 V AC
Mounting position >Mounting position	Vertical and 90° in all directions   With residual-current release XFI: - NZM1, N1, NZM2, N2: vertical and 90° in all directions with plug-in adapter elements - NZM1, N1, NZM2, N2: vertical, 90° right/left with withdrawable unit: - NZM3, N3: vertical, 90 ° left - NZM4, N4: vertical with remote operator: - NZM2, N(S)2, NZM3, N(S)3, NZM4, N(S)4: vertical and 90° in all directions
Direction of incoming supply	as required
Degree of protection >Device	In the area of the HMI devices: IP20 (basic protection type)
Degree of protection >Enclosures	With insulating surround: IP40 With door coupling rotary handle: IP66
Degree of protection >Terminations	Tunnel terminal: IP10 Phase isolator and band terminal: IP00
Rated surge voltage invariability [Uimp ] >Main contacts	6000 V
Rated surge voltage invariability [Uimp ] >Auxiliary contacts	6000 V
Rated operational voltage [Ue]	690 V AC
Rated operating frequency [f]	50/60 Hz
Rated current = rated uninterrupted current [In = Iu]	160 A
Overvoltage category/pollution degree	III/3
Rated insulation voltage [Ui ]	690 V
Use in unearthed supply systems	≦ 690 V
Other technical data (sheet catalogue)	Weight Temperature dependency, Derating Effective power loss
690 V 50/60 H [Ic]	2.8 kA
t = 0.3 s [Icw ]	2 kA
t = 1 s [Icw ]	2 kA
With back-up fuse	gR: 160 A gG/gL
400 … 415 V	100 kA
690 V	80 kA
With downstream fuse	gR: 160 A gG/gL
400 … 415 V	100 kA
690 V	10 kA
Rated operational current [Ie ] >AC-22/23A >415 V [Ie]	160 A
Rated operational current [Ie ] >AC-22/23A >690 V [Ie]	160 A
Lifespan, mechanical [Operations]	20000
Max. operating frequency	120 Ops/h
AC-1 >400 V 50/60 Hz [Operations]	7500
AC-1 >415 V 50/60 Hz [Operations]	7500
AC-1 >690 V 50/60 Hz [Operations]	5000
AC-23A >400 V 50/60 Hz [Operations]	1000
AC-23A >415 V 50/60 Hz [Operations]	1000
AC-23A >690 V 50/60 Hz [Operations]	1000
Standard equipment	Box terminal
Optional accessories	Screw connection Tunnel terminal connection on rear
Copper conductors and cables >Box terminal >Solid	1 x (10 - 16) 2 x (6 - 16) mm2
Copper conductors and cables >Box terminal >Stranded	1 x (10 - 70) 3) 2 x (6 - 25) mm2
Copper conductors and cables >Box terminal	3) Up to 95 mm² can be connected depending on the cable manufacturer.
Copper conductors and cables >Tunnel terminal >Solid	1 x 16 mm2
Copper conductors and cables >Tunnel terminal >Stranded >1-hole	1 x (25 - 95) mm2
Copper conductors and cables >Bolt terminal and rear-side connection >Direct on the switch >Solid	1 x (10 - 16) 2 x (6 - 16) mm2
Copper conductors and cables >Bolt terminal and rear-side connection >Direct on the switch >Stranded	1 x (25 - 70) 3) 2 x 25 mm2
Copper conductors and cables >Bolt terminal and rear-side connection >Direct on the switch	3) Up to 95 mm² can be connected depending on the cable manufacturer.
Al conductors, Al cable >Tunnel terminal >Solid	1 x 16 mm2
Al conductors, Al cable >Tunnel terminal >Stranded >1-hole	1 x (25 - 95) mm2
Al conductors, Al cable >Bolt terminal and rear-side connection >Direct on the switch >Solid	1 x (10 - 16) 2 x (10 - 16) mm2
Al conductors, Al cable >Bolt terminal and rear-side connection >Direct on the switch >Stranded	1 x (25 - 70) 3) 2 x 25 mm2
Cu strip (number of segments x width x segment thickness) >Box terminal [min.]	2 x 9 x 0.8 mm
Cu strip (number of segments x width x segment thickness) >Box terminal [max.]	9 x 9 x 0.8 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Screw connection	M6
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Direct on the switch [min.]	12 x 5 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Direct on the switch [max.]	16 x 5 mm
Rated operational current for specified heat dissipation [In]	160 A
Equipment heat dissipation, current-dependent [Pvid]	29.18 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+70 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Version as main switch	Yes
Version as maintenance-/service switch	Yes
Version as safety switch	No
Version as emergency stop installation	Yes
Version as reversing switch	No
Number of switches	1
Max. rated operation voltage Ue AC	690 V
Rated operating voltage	690 - 690 V
Rated permanent current Iu	160 A
Rated permanent current at AC-23, 400 V	0 A
Rated permanent current at AC-21, 400 V	0 A
Rated operation power at AC-3, 400 V	0 kW
Rated short-time withstand current lcw	2 kA
Rated operation power at AC-23, 400 V	90 kW
Switching power at 400 V	0 kW
Conditioned rated short-circuit current Iq	0 kA
Number of poles	3
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	0
Motor drive optional	No
Motor drive integrated	No
Voltage release optional	No
Device construction	Built-in device fixed built-in technique
Suitable for ground mounting	Yes
Suitable for front mounting 4-hole	No
Suitable for front mounting centre	No
Suitable for distribution board installation	Yes
Suitable for intermediate mounting	Yes
Colour control element	Black
Type of control element	Rocker lever
Interlockable	Yes
Type of electrical connection of main circuit	Frame clamp
Degree of protection (IP), front side	IP20
Degree of protection (NEMA)

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.