alt
alt

PKZM4-25-CB
132592 PKZM4-25-CB
132592

Devre kesici, Ir= 16 - 25 A, Vidalı terminaller, Sonlandırmalar: IP2X Kabloların ve iletkenlerin korunmasına yönelik devre kesiciler, UL489, CSA22.2 no. 5-09, ana şalter olarak kullanılamaz

Devre kesici, Ir= 16 - 25 A, Vidalı terminaller, Sonlandırmalar: IP2X
Kabloların ve iletkenlerin korunmasına yönelik devre kesiciler, UL489, CSA22.2 no. 5-09, ana şalter olarak kullanılamaz

Product range PKZM4 motor protective circuit-breakers up to 65 A
PKZM4 circuit-breakers up to 32 A according to 489
Basic function Line and cable protection
Function For protection of cables and conductors
Connection technique Screw terminals
Contact sequence 121S003
Rated uninterrupted current [Iu] 25 A
Overload releases [Ir ]
short-circuit release [Irm ]
>max. [Irm ]
16 - 25 A
Notes 388 A
Standards Not usable as a main switch
Climatic proofing
Ambient temperature
>Storage
IEC/EN 60947, VDE 0660,UL, CSA
Ambient temperature
>Open
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
>Enclosed
- 40 - 80 °C
Mounting position -25 - +55 °C
Direction of incoming supply - 25 - 40 °C
Degree of protection
>Device
121N006
Degree of protection
>Terminations
as required
Protection against direct contact when actuated from front (EN 50274) IP20
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27 IP2X
Altitude Finger and back-of-hand proof
Terminal capacity main cable
>Screw terminals
>Solid
15 g
Terminal capacity main cable
>Screw terminals
>Flexible with ferrule to DIN 46228
Max. 2000 m
Terminal capacity main cable
>Screw terminals
>Solid or stranded
1 x (0.75 - 16)
2 x (0.75 - 16) mm2
Terminal capacity main cable
>Screw terminals
>Stripping length
1 x (0.75 - 16)
2 x (0.75 - 16) mm2
Specified tightening torque for terminal screws
>Main cable
14 - 6 AWG
Rated impulse withstand voltage [Uimp] 14 mm
Overvoltage category/pollution degree 3.3 Nm
Rated operational voltage [Ue ]
Rated uninterrupted current = rated operational current [Iu = Ie ] 6000 V AC
Rated frequency [f] III/3
Current heat loss (3 pole at operating temperature) 690 V AC
Impedance per pole 25 A
Lifespan, mechanical [Operations] 40 - 60 Hz
Lifespan, electrical (AC-3 at 400 V)
>Lifespan, electrical [Operations]
14.7 W
Max. operating frequency 12 mΩ
Short-circuit rating
>DC
>Notes
0.03 x 106
Motor switching capacity
>AC-3 (up to 690V)
0.03 x 106
Motor switching capacity
>DC-5 (up to 250V)
40 Ops/h
Temperature compensation
>to IEC/EN 60947, VDE 0660
up to 250 V
Temperature compensation
>Operating range
25 A
Temperature compensation residual error for T > 40 °C 25 (3 contacts in series) A
Setting range of overload releases
short-circuit release - 5…40 °C
Short-circuit release tolerance - 25…55 °C
Phase-failure sensitivity ≦ 0.25 %/K
Short Circuit Current Rating (UL489, CSA 22.2 No. )
>480Y / 277V
0.6 - 1 x Iu
Rated operational current for specified heat dissipation [In] Basic device, fixed: 15.5 x Iu
Heat dissipation per pole, current-dependent [Pvid] ± 20%
Equipment heat dissipation, current-dependent [Pvid] IEC/EN 60947-4-1, VDE 0660 Part 102
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss] 65 kA
Operating ambient temperature min.
Operating ambient temperature max. 25 A
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
4.9 W
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
14.7 W
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
0 W
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
0 W
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
-25 °C
10.2 Strength of materials and parts
>10.2.5 Lifting
+55 °C
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function Is the panel builder´s responsibility.
Rated permanent current Iu Is the panel builder´s responsibility.
Rated voltage Is the panel builder´s responsibility.
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz Is the panel builder´s responsibility.
Overload release current setting The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Adjustment range short-term delayed short-circuit release Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Adjustment range undelayed short-circuit release Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Integrated earth fault protection The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Device construction
Suitable for DIN rail (top hat rail) mounting 25 A
DIN rail (top hat rail) mounting optional 600 - 600 V
Number of auxiliary contacts as normally closed contact 65 kA
Number of auxiliary contacts as normally open contact 0 - 25 A
Number of auxiliary contacts as change-over contact 0 - 0 A
With switched-off indicator 0 - 350 A
With under voltage release No
Number of poles Screw connection
Position of connection for main current circuit Built-in device fixed built-in technique
Type of control element Yes
Complete device with protection unit Yes
Motor drive integrated 0
Motor drive optional 0
Degree of protection (IP) 0
Product Standards No
UL File No. No
UL Category Control No. 3
CSA File No. Other
CSA Class No. Turn button
North America Certification Yes
Specially designed for North America No
Suitable for No
Characteristic curve IP20
Characteristic curve UL 489; CSA-C22.2 no. 5-09; IEC60947-4-1; CE marking
Characteristic curve E31593

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.