PKZM01-10-G
286087 PKZM01-10-G
286087

Motor koruyucu devre kesici, 660 V 690 V: 7,5 kW, Ir= 6,3 - 10 A, IP20
Paketten çıkarma süreleri daha kısa olan eksiksiz bir cihaz olarak muhafaza içinde önceden monte edilmiş motor koruyucu devre kesici

Product range	PKZM0 motor protective circuit-breakers up to 32 A
Basic function	Motor protection
Notes	with operating membrane
Connection technique
Contact sequence	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
AC-3 >220 V 230 V 240 V [P]	Screw terminals
AC-3 >380 V 400 V 415 V [P]
AC-3 >440 V [P]
AC-3 >500 V [P]	2.2 kW
AC-3 >660 V 690 V [P]	4 kW
Rated uninterrupted current [Iu]	4 kW
Overload releases [Ir ]	4 kW
short-circuit release [Irm ] >max. [Irm ]	7.5 kW
Phase-failure sensitivity	10 A
Notes
Standards	6.3 - 10 A
Ambient temperature >Storage	155 A
Ambient temperature >Enclosed	IEC/EN 60947-4-1, VDE 0660 Part 102
Direction of incoming supply	Overload trigger: tripping class 10 A Can be snapped on to IEC/EN 60715 top-hat rail with 7.5 or 15 mm height.
Degree of protection >Device
Degree of protection >Enclosures	IEC/EN 60947, VDE 0660
Protection against direct contact when actuated from front (EN 50274)	- 40 - 80 °C
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27	- 25 - 40 °C
Altitude	as required
Terminal capacity main cable >Screw terminals >Solid	IP20
Terminal capacity main cable >Screw terminals >Flexible with ferrule to DIN 46228	IP65
Terminal capacity main cable >Screw terminals >Solid or stranded	Finger and back-of-hand proof
Terminal capacity main cable >Screw terminals >Stripping length	25 g
Specified tightening torque for terminal screws >Main cable	Max. 2000 m
Rated impulse withstand voltage [Uimp]	1 x (1 - 6) 2 x (1 - 6) mm2
Overvoltage category/pollution degree	1 x (1 - 6) 2 x (1 - 6) mm2
Rated operational voltage [Ue ]	18 - 10 AWG
Rated uninterrupted current = rated operational current [Iu = Ie ]	10 mm
Rated frequency [f]	1.7 Nm
Current heat loss (3 pole at operating temperature)
Impedance per pole	6000 V AC
Lifespan, mechanical [Operations]	III/3
Lifespan, electrical (AC-3 at 400 V) >Lifespan, electrical [Operations]	690 V AC
Max. operating frequency	10 A
Short-circuit rating >DC >Short-circuit rating	40 - 60 Hz
Short-circuit rating >DC >Notes	6.48 W
Motor switching capacity >AC-3 (up to 690V)	21 mΩ
Motor switching capacity >DC-5 (up to 250V)	0.05 x 106
Setting range of overload releases	0.05 x 106
short-circuit release	25 Ops/h
Short-circuit release tolerance	60 kA
Phase-failure sensitivity	up to 250 V
Short Circuit Current Rating, group protection >600 V High Fault >SCCR (fuse)	10 A
Short Circuit Current Rating, group protection >600 V High Fault >max. Fuse	10 (3 contacts in series) A
Short Circuit Current Rating, group protection >600 V High Fault >SCCR (CB)
Short Circuit Current Rating, group protection >600 V High Fault >max. CB	0.6 - 1 x Iu
Rated operational current for specified heat dissipation [In]	Basic device, fixed: 15.5 x Iu
Heat dissipation per pole, current-dependent [Pvid]	± 20%
Equipment heat dissipation, current-dependent [Pvid]	IEC/EN 60947-4-1, VDE 0660 Part 102
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss]	30 kA
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	600 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	30 kA
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	600 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	10 A
10.2 Strength of materials and parts >10.2.5 Lifting	2.16 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	6.48 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	0 W
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Overload release current setting	Does not apply, since the entire switchgear needs to be evaluated.
Adjustment range undelayed short-circuit release	Is the panel builder´s responsibility.
With thermal protection	Is the panel builder´s responsibility.
Phase failure sensitive	Is the panel builder´s responsibility.
Switch off technique	Is the panel builder´s responsibility.
Rated operating voltage	Is the panel builder´s responsibility.
Rated permanent current Iu	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation power at AC-3, 230 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Type of electrical connection of main circuit	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of control element
Device construction
With integrated auxiliary switch	6.3 - 10 A
With integrated under voltage release	155 - 155 A
Number of poles	Yes
Rated short-circuit breaking capacity lcu at 400 V, AC	Yes
Degree of protection (IP)	Thermomagnetic
Height	690 - 690 V
Width	10 A
Depth	2.2 kW
Specially designed for North America	4 kW
Characteristic curve	Screw connection
Characteristic curve	Push button
Characteristic curve	Complete device in housing

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.