alt
alt

PKZM01-1,6-G
286083 PKZM01-1,6-G
286083

Motor koruyucu devre kesici, 660 V 690 V: 1,1 kW, Ir= 1 - 1,6 A, IP20 Paketten çıkarma süreleri daha kısa olan eksiksiz bir cihaz olarak muhafaza içinde önceden monte edilmiş motor koruyucu devre kesici

Motor koruyucu devre kesici, 660 V 690 V: 1,1 kW, Ir= 1 - 1,6 A, IP20
Paketten çıkarma süreleri daha kısa olan eksiksiz bir cihaz olarak muhafaza içinde önceden monte edilmiş motor koruyucu devre kesici

Product range PKZM0 motor protective circuit-breakers up to 32 A
Basic function Motor protection
Notes with operating membrane
Connection technique 0000SPC-571
Contact sequence Also suitable for motors with efficiency class IE3.
IE3-ready devices are identified by the logo on their packaging.
AC-3
>220 V 230 V 240 V [P]
Screw terminals
AC-3
>380 V 400 V 415 V [P]
121S003
AC-3
>440 V [P]
AC-3
>500 V [P]
0.25 kW
AC-3
>660 V 690 V [P]
0.55 kW
Rated uninterrupted current [Iu] 0.55 kW
Overload releases [Ir ] 0.75 kW
short-circuit release [Irm ]
>max. [Irm ]
1.1 kW
Phase-failure sensitivity 1.6 A
Notes
Standards 1 - 1.6 A
Ambient temperature
>Storage
24.8 A
Ambient temperature
>Enclosed
IEC/EN 60947-4-1, VDE 0660 Part 102
Direction of incoming supply Overload trigger: tripping class 10 A
Can be snapped on to IEC/EN 60715 top-hat rail with 7.5 or 15 mm height.
Degree of protection
>Device
Degree of protection
>Enclosures
IEC/EN 60947, VDE 0660
Protection against direct contact when actuated from front (EN 50274) - 40 - 80 °C
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27 - 25 - 40 °C
Altitude as required
Terminal capacity main cable
>Screw terminals
>Solid
IP20
Terminal capacity main cable
>Screw terminals
>Flexible with ferrule to DIN 46228
IP65
Terminal capacity main cable
>Screw terminals
>Solid or stranded
Finger and back-of-hand proof
Terminal capacity main cable
>Screw terminals
>Stripping length
25 g
Specified tightening torque for terminal screws
>Main cable
Max. 2000 m
Rated impulse withstand voltage [Uimp] 1 x (1 - 6)
2 x (1 - 6) mm2
Overvoltage category/pollution degree 1 x (1 - 6)
2 x (1 - 6) mm2
Rated operational voltage [Ue ] 18 - 10 AWG
Rated uninterrupted current = rated operational current [Iu = Ie ] 10 mm
Rated frequency [f] 1.7 Nm
Current heat loss (3 pole at operating temperature)
Impedance per pole 6000 V AC
Lifespan, mechanical [Operations] III/3
Lifespan, electrical (AC-3 at 400 V)
>Lifespan, electrical [Operations]
690 V AC
Max. operating frequency 1.6 A
Short-circuit rating
>DC
>Short-circuit rating
40 - 60 Hz
Short-circuit rating
>DC
>Notes
5.36 W
Motor switching capacity
>AC-3 (up to 690V)
700 mΩ
Motor switching capacity
>DC-5 (up to 250V)
0.05 x 106
Setting range of overload releases 0.05 x 106
short-circuit release 25 Ops/h
Short-circuit release tolerance 60 kA
Phase-failure sensitivity up to 250 V
Rated operational current for specified heat dissipation [In] 1.6 A
Heat dissipation per pole, current-dependent [Pvid] 1.6 (3 contacts in series) A
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs] 0.6 - 1 x Iu
Heat dissipation capacity [Pdiss] Basic device, fixed: 15.5 x Iu
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
± 20%
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
IEC/EN 60947-4-1, VDE 0660 Part 102
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
1.6 A
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
1.79 W
10.2 Strength of materials and parts
>10.2.5 Lifting
5.36 W
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0 W
10.2 Strength of materials and parts
>10.2.7 Inscriptions
0 W
10.3 Degree of protection of ASSEMBLIES
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Meets the product standard´s requirements.
10.8 Connections for external conductors Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Meets the product standard´s requirements.
10.12 Electromagnetic compatibility Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function Does not apply, since the entire switchgear needs to be evaluated.
Overload release current setting Is the panel builder´s responsibility.
Adjustment range undelayed short-circuit release Is the panel builder´s responsibility.
With thermal protection Is the panel builder´s responsibility.
Phase failure sensitive Is the panel builder´s responsibility.
Switch off technique Is the panel builder´s responsibility.
Rated operating voltage The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated permanent current Iu Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 230 V Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 400 V The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Type of control element
Device construction 1 - 1.6 A
With integrated auxiliary switch 25 - 25 A
With integrated under voltage release Yes
Number of poles Yes
Rated short-circuit breaking capacity lcu at 400 V, AC Thermomagnetic
Degree of protection (IP) 690 - 690 V
Height 1.6 A
Width 0.25 kW
Depth 0.55 kW
Specially designed for North America Screw connection
Characteristic curve Push button
Characteristic curve Complete device in housing
Characteristic curve No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.