PKE65/AK/XTU-65-SP
170482 PKE65/AK/XTU-65-SP
170482

Motor koruyucu devre kesici, E Tipi DOL yolvericiler (komple cihazlar), Elektronik, 16 - 65 A, Açma butonu, Vidalı bağlantı, Kuzey Amerika
UL 508'e uygun ((kendinden korumalı) kombinasyon motor kontrolörü) E tipi komple cihaz olarak motor koruyucu devre kesici, PKE65 temel cihaz ve PKE-XTU-65 açma bloğundan oluşur, kilitlenebilir düğme ve UL için karşılık gelen uzatma terminali ile , 40 beygir gücüne (FLA = 52 A / 480 V) kadar olan motorlar için kullanılabilir, UL'ye göre kısa devre akımı değeri: 65 kA (480 V/ 277 V), elektronik geniş aralıklı aşırı yük koruması, yüksek kısa devre kesme IEC (80 kA / 400 V) kapasiteli, DILM17 ila DILM72 kontaktörlerle birlikte F tipi motor yol verici (kombinasyon motor kontrolörü) olarak kullanılabilir.

Basic function	Type E DOL starters (complete devices)
Connection technique	Screw terminals
Components for	North America
Connection to SmartWire-DT	no
AC HP = PS >200 V 208 V
AC HP = PS >230 V 240 V	15 HP
AC HP = PS >460 V 480 V	15 HP
240 V	40 HP
480 Y 277 V
Setting range of overload releases [Ir]	65 kA
Motor-protective circuit-breakers	65 kA
Extension terminal
Notes	16 - 65 A
Standards	PKE65/AK/XTU-65 Type
Mounting position	BK50/3-PKZ4-E
Ambient temperature	The type E DOL starter (without protection) consists of a PKE65 motor-protective circuit-breaker with AK-PKZ0 and a BK50/3-PKZ4-E extension terminal.
Rated impulse withstand voltage [Uimp]
Overvoltage category/pollution degree	IEC/EN 60947-4-1, VDE 0660, UL, CSA
Rated operational voltage [Ue]
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	-25 - +55
AC-4 cycle operation >Minimum current flow times
AC-4 cycle operation >Minimum cut-out periods	6000 V AC
AC-4 cycle operation >Note	III/3
Motor protective circuit breaker PKZM0, PKE	208 - 480 V
DILM contactors >Current heat loss >Current heat loss at Ie to AC-3/400 V	65 A
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	500 ms
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
Short Circuit Current Rating, type E >240 V
Short Circuit Current Rating, type E >480 Y / 277 V	PKE motor-protective circuit-breaker, see motor-protective circuit-breaker product group
Rated operational current for specified heat dissipation [In]	19.2 W
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid]	15 HP
Static heat dissipation, non-current-dependent [Pvs]	15 HP
Heat dissipation capacity [Pdiss]	40 HP
Operating ambient temperature min.	65 kA
Operating ambient temperature max.	65 kA
10.2 Strength of materials and parts >10.2.2 Corrosion resistance
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	61.4 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	6.4 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	19.2 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	-25 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions	+55 °C
10.3 Degree of protection of ASSEMBLIES
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Overload release current setting	Is the panel builder´s responsibility.
Adjustment range undelayed short-circuit release	Is the panel builder´s responsibility.
With thermal protection	Is the panel builder´s responsibility.
Phase failure sensitive	Is the panel builder´s responsibility.
Switch off technique	Is the panel builder´s responsibility.
Rated operating voltage	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated permanent current Iu	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 230 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-3, 400 V	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Type of control element
Device construction	16 - 65 A
With integrated auxiliary switch	0 - 0 A
With integrated under voltage release	Yes
Number of poles	Yes
Rated short-circuit breaking capacity lcu at 400 V, AC	Electronic
Degree of protection (IP)	690 - 690 V
Height	65 A
Width	18.5 kW
Depth	30 kW
Product Standards	Screw connection
UL File No.	Turn button
UL Category Control No.	Built-in device fixed built-in technique
CSA File No.	No
CSA Class No.	No
North America Certification	3
Specially designed for North America	80 kA
Characteristic curve	IP20

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.