PKE-XTUWCP-36
168796 PKE-XTUWCP-36
168796

Açma bloğu, 15 - 36 A, Sistem koruması, SmartWire-DT'ye bağlantı: hayır, Şunlarla kullanım için: PKE65 temel cihaz
IEC 60947-2'ye göre sistem koruması için elektronik kontrol ünitesi, PKE65 temel cihazla aletsiz montaj, ayarlanabilir elektronik geniş aralıklı aşırı yük koruması (2, 4 : 1), ayarlanabilir kısa devre bobinleri

Product range	Accessories
Accessories	Trip blocks
Basic function	System protection Line and cable protection
Overload releases [Ir ] >Setting range of overload releases [Ir]
Overload releases [Ir ] >Overload release, min. [Ir]	15 - 36 A
Overload releases [Ir ] >Overload release, max. [Ir ]	15 A
short-circuit release [Irm ]	36 A
Function	75 - 288 A
Rated uninterrupted current = rated operational current [Iu = Ie ]	with overcurrent protection and short-circuit protective device
For use with	36 A
Connection to SmartWire-DT	PKE65 basic device
Standards	no
Climatic proofing
Ambient temperature >Storage	IEC/EN 60947, VDE 0660
Ambient temperature >Open	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Enclosed	- 40 - 80 °C
Mounting position	-25 - +55 °C
Direction of incoming supply	- 25 - 40 °C
Degree of protection >Device
Degree of protection >Terminations	as required
Protection against direct contact when actuated from front (EN 50274)	IP20
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27	IP00
Altitude	Finger and back-of-hand proof
Rated impulse withstand voltage [Uimp]	25 g
Overvoltage category/pollution degree	Max. 2000 m
Rated operational voltage [Ue ]
Rated uninterrupted current = rated operational current [Iu = Ie ]	6000 V AC
Rated frequency [f]	III/3
Max. operating frequency	690 V AC
AC-4 cycle operation >Minimum current flow times	36 A
AC-4 cycle operation >Minimum cut-out periods	40 - 60 Hz
AC-4 cycle operation >Note	60 Ops/h
Temperature compensation >to IEC/EN 60947, VDE 0660	500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms
Temperature compensation >Operating range	500 ms
Setting range of overload releases	In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
short-circuit release
Short-circuit release tolerance	- 5…40 °C
Phase-failure sensitivity	- 25…55 °C
Rated operational current for specified heat dissipation [In]	0.42 - 1 x Iu
Heat dissipation per pole, current-dependent [Pvid]	Trip block, adjustable: 5 - 8 x Ir delayed approx. 60 ms
Equipment heat dissipation, current-dependent [Pvid]	± 20%
Static heat dissipation, non-current-dependent [Pvs]	no (with PKE-XTU(A)CP-...)
Heat dissipation capacity [Pdiss]
Operating ambient temperature min.	36 A
Operating ambient temperature max.	1.7 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	4.9 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	-25 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	+55 °C
10.2 Strength of materials and parts >10.2.5 Lifting
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Overload release current setting	Is the panel builder´s responsibility.
Initial value of the undelayed short-circuit release - setting range	Is the panel builder´s responsibility.
End value adjustment range undelayed short-circuit release	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated permanent current Iu	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Voltage type for actuating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 50HZ	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated control supply voltage Us at AC 60HZ
Rated control supply voltage Us at DC
Number of poles	15 - 36 A
Short-circuit release function	75 A
With ground fault protection function	288 A
Type of motor protection	36 A
Specially designed for North America	Self powered
Characteristic curve	0 - 0 V

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.