PKE-XTUA-65
138260 PKE-XTUA-65
138260

Açma bloğu, 16 - 65 A, Motor koruması, SmartWire-DT'ye bağlantı: evet, Şunlarla kullanım için: PKE65 temel cihaz
PKE65 temel cihazı için IEC60947-4-1'e uygun motor koruması için elektronik kontrol ünitesi, elektronik geniş aralıklı aşırı yük koruması (4:1), faz hatası ve dengesizlik koruması, ayarlanabilir tetikleme sınıfı, SmartWire-DT'ye bağlantı için arayüz. ATEX onayı

Product range	Accessories
Accessories	Trip blocks
Basic function	Motor protection Motor protection for heavy starting duty
Overload releases [Ir ] >Setting range of overload releases [Ir]
Overload releases [Ir ] >Overload release, min. [Ir]	16 - 65 A
Overload releases [Ir ] >Overload release, max. [Ir ]	16 A
Function	65 A
Rated uninterrupted current = rated operational current [Iu = Ie ]	With overload release
AC-3 >220 V 230 V [P]	65 A
AC-3 >380 V 400 V [P]
AC-3 >440 V [P]	18.5 kW
AC-3 >500 V [P]	30 kW
AC-3 >660 V 690 V [P]	37 kW
For use with	45 kW
Connection to SmartWire-DT	55 kW
Motor output/rated motor current	PKE65 basic device
Standards	yes in conjunction with PKE-SWD-SP SmartWire DT PKE module
Climatic proofing	Motor rating Rated motor current AC-3 220 V 230 V 240 V 380 V 400 V 415 V 440 V 500 V 660 V 690 V P I I I I I kW A A A A A 5.5   19.6   -   -   -   - 7.5   26.4   -   -   -   - 11   38   21.7   19.7   17.4   - 15   51   29.3   26.6   23.4   17 18.5   63   36   32.9   28.9   20.9 22   -   41   37.4   33   23.8 30   -   55   50.3   44   32 37   -   -   61.4   54   39 45   -   -   -   65   47 55   -   -   -   -   58
Ambient temperature >Storage
Ambient temperature >Open	IEC/EN 60947, VDE 0660,UL, CSA
Ambient temperature >Enclosed	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mounting position	- 40 - 80 °C
Direction of incoming supply	-25 - +55 °C
Degree of protection >Device	- 25 - 40 °C
Degree of protection >Terminations
Protection against direct contact when actuated from front (EN 50274)	as required
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27	IP20
Altitude	IP00
Rated impulse withstand voltage [Uimp]	Finger and back-of-hand proof
Overvoltage category/pollution degree	15 g
Rated operational voltage [Ue ]	Max. 2000 m
Rated uninterrupted current = rated operational current [Iu = Ie ]
Rated frequency [f]	6000 V AC
Max. operating frequency	III/3
Motor switching capacity >AC-3 (up to 690V)	690 V AC
AC-4 cycle operation >Minimum current flow times	65 A
AC-4 cycle operation >Minimum cut-out periods	40 - 60 Hz
AC-4 cycle operation >Note	60 Ops/h
Temperature compensation >to IEC/EN 60947, VDE 0660	65 A
Temperature compensation >Operating range	500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms
Setting range of overload releases	500 ms
short-circuit release	In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
Short-circuit release tolerance
Phase-failure sensitivity	- 5…40 °C
Rated operational current for specified heat dissipation [In]	- 25…55 °C
Heat dissipation per pole, current-dependent [Pvid]	0.25 - 1 x Iu
Equipment heat dissipation, current-dependent [Pvid]	Trip block, fixed: 15.5 x Ir delayed approx. 60 ms
Static heat dissipation, non-current-dependent [Pvs]	± 20%
Heat dissipation capacity [Pdiss]	IEC/EN 60947-4-1, VDE 0660 Part 102
Operating ambient temperature min.
Operating ambient temperature max.	65 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	3.1 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	9.3 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	-25 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+55 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Overload release current setting	Is the panel builder´s responsibility.
Initial value of the undelayed short-circuit release - setting range	Is the panel builder´s responsibility.
End value adjustment range undelayed short-circuit release	Is the panel builder´s responsibility.
Rated permanent current Iu	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Voltage type for actuating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 60HZ	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated control supply voltage Us at DC
Number of poles
Short-circuit release function	16 - 65 A
With ground fault protection function	192 A
Type of motor protection	780 A
Product Standards	65 A
UL File No.	Self powered
UL Category Control No.	0 - 0 V
CSA File No.	0 - 0 V
CSA Class No.	0 - 0 V
North America Certification	3
Specially designed for North America	Delayed
Characteristic curve	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.