PKE-XTU-36
171497 PKE-XTU-36
171497

Açma bloğu, Motor koruması, SmartWire-DT'ye bağlantı: hayır, Şunlarla kullanım için: PKE32 temel cihaz
PKE32 temel cihazı için IEC60947-4-1'e uygun motor korumasına yönelik elektronik kontrol ünitesi, elektronik geniş aralıklı aşırı yük koruması (4:1), faz hatası ve dengesizlik koruması, ayarlanabilir tetikleme sınıfı. ATEX akreditasyonu

Product range	Accessories
Accessories	Trip blocks
Basic function	Motor protection
Overload releases [Ir ] >Setting range of overload releases [Ir]
Overload releases [Ir ] >Overload release, min. [Ir]	8 - 36 A
Overload releases [Ir ] >Overload release, max. [Ir ]	8 A
Function	36 A
Rated uninterrupted current = rated operational current [Iu = Ie ]	with overcurrent protection and short-circuit protective device
AC-3 >220 V 230 V [P]	36 A
AC-3 >380 V 400 V [P]
AC-3 >440 V [P]	7.5 kW
AC-3 >500 V [P]	18.5 kW
AC-3 >660 V 690 V [P]	18.5 kW
For use with	22 kW
Connection to SmartWire-DT	30 kW
Standards	PKE32 basic device
Climatic proofing	no
Ambient temperature >Storage	Motor rating Rated motor current AC-3 220 V 230 V 240 V 380 V 400 V 415 V 440 V 500 V 660 V 690 V P I I I I I kW A A A A A 2.2   8.7   -   -   -   - 3   11.5   -   -   -   - 4   14.8   8.5   -   -   - 5.5   19.6   11.3   10.2   9   - 7.5   26.4   15.2   13.8   12.1   8.8 11   -   21.7   19.8   17.4   12.6 15   -   29.3   26.6   23.4   17 18.5   -   36   32.8   28.9   20.9 22   -   -   -   33   23.8 30   -   -   -   -   32
Ambient temperature >Open
Ambient temperature >Enclosed	IEC/EN 60947, VDE 0660
Ambient temperature	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mounting position	- 40 - 80 °C
Direction of incoming supply	-25 - +55 °C
Degree of protection >Device	- 25 - 40 °C
Degree of protection >Terminations	Observe the conditions of use
Protection against direct contact when actuated from front (EN 50274)
Mechanical shock resistance half-sinusoidal shock 10 ms to IEC 60068-2-27	as required
Altitude	IP20
Rated impulse withstand voltage [Uimp]	IP00
Overvoltage category/pollution degree	Finger and back-of-hand proof
Rated operational voltage [Ue ]	25 g
Rated uninterrupted current = rated operational current [Iu = Ie ]	Max. 2000 m
Rated frequency [f]
Max. operating frequency	6000 V AC
Motor switching capacity >AC-3 (up to 690V)	III/3
AC-4 cycle operation >Minimum current flow times	690 V AC
AC-4 cycle operation >Minimum cut-out periods	36 A
AC-4 cycle operation >Note	40 - 60 Hz
Temperature compensation >to IEC/EN 60947, VDE 0660	60 Ops/h
Temperature compensation >Operating range	36 A
Setting range of overload releases	500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms
short-circuit release	500 ms
Short-circuit release tolerance	In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
Phase-failure sensitivity
Rated operational current for specified heat dissipation [In]	- 5…40 °C
Heat dissipation per pole, current-dependent [Pvid]	- 25…55 °C
Equipment heat dissipation, current-dependent [Pvid]	0.25 - 1 x Iu
Static heat dissipation, non-current-dependent [Pvs]	Trip block, fixed: 15.5 x Ir delayed approx. 60 ms
Heat dissipation capacity [Pdiss]	± 20%
Operating ambient temperature min.	IEC/EN 60947-4-1, VDE 0660 Part 102
Operating ambient temperature max.
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	36 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	1.7 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	4.9 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	-25 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	+55 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Is the panel builder´s responsibility.
Overload release current setting	Is the panel builder´s responsibility.
Initial value of the undelayed short-circuit release - setting range	Is the panel builder´s responsibility.
End value adjustment range undelayed short-circuit release	Is the panel builder´s responsibility.
Rated permanent current Iu	Is the panel builder´s responsibility.
Voltage type for actuating	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated control supply voltage Us at DC	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of poles
Short-circuit release function
With ground fault protection function	8 - 36 A
Type of motor protection	96 A
Specially designed for North America	432 A
Characteristic curve	36 A

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.