NZM4-XR208-240AC
266685 NZM4-XR208-240AC
266685

Uzak operatör, 208-240VAC, boyut 4 için
Devre kesici serisi için opsiyonel aksesuarlar NZM, dünya çapında kullanım için kapsamlı bir uygulama seçenekleri portföyü sunar. Modüler fonksiyon grupları sayesinde montajı her zaman esnek ve kolaydır. Notlar: devre kesicilerin ve yük ayırıcıların uzaktan anahtarlanması için. İki telli veya üç telli kontrol aracılığıyla AÇIK ve KAPALI anahtarlama ve sıfırlama. Elle yerel anahtarlama mümkündür. 3 adede kadar asma kilitle uzak operatörün 0 konumunda kilitlenebilir (çivi kalınlığı: 4–8 mm). Senkronize edilebilir. Mekanik kilitleme ile birleştirilemez. Şunlar için kullanılabilir: NZM4(-4), N(N/O)4(-4)

Product range	Accessories
Accessories	Remote operator, can be synchronized
Rated operating frequency	AC 50/60 Hz
Standard/Approval	UL/CSA, IEC
Construction size	NZM4
Description	For remote switching of circuit-breakers and switch-disconnectors. ON and OFF switching and resetting by means of two-wire or three-wire control. Local switching by hand possible. Lockable in the 0 position of the remote operator with up to 3 padlocks (hasp thickness: 4 – 8 mm) Can be synchronized   Please note during engineering: Three-wire control Terminal 70/71:   NZM-XR: Contact loading according to technical data NZM2-XRD: Full current flows through the contact during make and break! RMQ series contact elements can be used for the NZM2(3.4)-XR(D)...remote operators.       Two-wire control Terminal 75:   NZM-XR: Operational readiness signal when cover closed and not locked. NZM2-XRD: Operational readiness signal when sliding switch set to Auto. Sliding switch with three positions: Manual/Auto/Locked for reliable differentiation of connected positions. AC-15: 400 V; 2 A DC-13: 220 V; 0.2 A     Three-wire control with automatic reset to the 0 position after the switch has tripped       Switching cycle:   NZM2-XR NZM3-XR NZM4-XR The time interval between OFF and ON is 3 seconds. On commands received during the time interval are ignored within the first 3 seconds after switch off.     Parallel remote operator connection
Closing delay	100 ms
Break time	3000 ms
Rated control voltage [Us]	208 - 240 V 50/60 Hz V
Number of poles	3/4 pole
For use with	NZM4(-4) N(S)4(-4)
Project planning information	Cannot be combined with switch-disconnector PN... Do not install M22-CK11(20/02) dual auxiliary contacts in the right-hand side auxiliary contact slot in NZM4-XR
Engineering information (sheet catalog)	2/3-wire control and circuit diagrams
Rated control voltage [Us ] >AC [Us ]	208-240 V AC
Operating range >AC	0.85 - 1.1 x Us
Operating range >DC	0.85 - 1.1 x Us
Motor rating >AC >110 V … 130 V AC [S]	350 VA
Minimum signal duration >with switch on	30 ms
Minimum signal duration >with switch off	500 ms
Lifespan, mechanical [Operations]	10000
Maximum operating frequency >Max. operating frequency	20 Ops/h
Terminal capacities >Solid or flexible conductor, with ferrule	0,75 - 2,5 mm2
Terminal capacities	18 … 14 AWG
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of switch drive	Motor drive
Rated control supply voltage Us at AC 50HZ	208 - 240 V
Rated control supply voltage Us at AC 60HZ	208 - 240 V
Rated control supply voltage Us at DC	0 - 0 V
Voltage type for actuating	AC
Product Standards	UL489; CSA-C22.2 No. 5-09; IEC60947, CE marking
UL File No.	E140305
UL Category Control No.	DIHS
CSA File No.	022086
CSA Class No.	1437-01
North America Certification	UL listed, CSA certified

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.