N4-4-800-S1-DC
119890 N4-4-800-S1-DC
119890

Yük ayırıcı 4p 800A 1000VDC
1500 V DC'ye kadar özel versiyondaki N..DC yük ayırıcılar 1 veya 2 kutupta kullanılabilir. Topraklanmış IT ağları için bile izolasyon özelliklerine uygundur. Köprü kitleri, bağlantı terminalleri ve kapı birleştirme döner kolları gibi aksesuarlar, çok çeşitli dağıtım sistemlerinde bireysel kuruluma olanak sağlar. Yardımcı anahtarlar, voltaj bobinleri ve uzak operatörler sinyalleşmeyi ve otomasyonu kolaylaştırır. Notlar: IEC/EN 60204 ve VDE 0113'e göre pozitif sürücü dahil ana anahtar özellikleri. IEC/EN 60947-3 ve VDE 0660'a göre izolasyon özellikleri. Terminal tipi: belirtilen bağlantı olanaklarına göre 2 kutuplu anahtarlama için seri bağlantı gereklidir. . Aksesuar köprü kitlerine bakın. Anahtar, takılabilir/çekilebilir ünitelerle ve/veya arkadaki bağlantıyla birleştirilemez.

Product range	Switch-disconnectors
Protective function	Disconnectors/main switches Photovoltaic applications
Product range	DC switch-disconnectors
Application field	Utility buildings Open areas
Part no.	N...DC
Standard/Approval	IEC
Rated operational voltage	1000
Installation type	Fixed
Construction size	N4
Description	IEC/EN 60947-3 CCC China Compulsory Certificate Main switch characteristics including positive drive to IEC/EN 60204 and VDE 0113. Isolating characteristics to IEC/EN 60947-3 and VDE 0660. N switch-disconnectors can, in addition, be combined with NZM...-XU, NZM...-XA shunt releases and auxiliary contacts as well as with NZM...-XR... remote operator. For DC switching, all 4 contacts must be connected in series. Refer to the information on jumper kit accessories. Supplied as standard: Screw connection; box terminal optional. When working with ungrounded systems (e.g., IT), the installation must ensure that a double ground fault will be impossible. Switch can not be combined with plug-in/withdrawable units and/or connection on rear. N4-4-...-S15-DC feeder unit and outgoer from the bottom only.
Connection options
Number of poles	4-pole basic device, usable in a 1-pole or 2-pole configuration depending on the type of connection
Standard equipment	Screw connection
Switch positions	I, +, 0
Rated current = rated uninterrupted current [In = Iu]	800 A
Remotely control / trip	Remote operation with shunt releases / remote operator
Rated operating frequency	DC
Rated operational voltage, max. [Ue]	1000 V DC
Rated uninterrupted current with terminal jumpers >at 40°	800
Rated uninterrupted current with terminal jumpers >at 65°	800
Rated uninterrupted current with terminal jumpers	Values for rated uninterrupted current at 65 °C include jumpers.
Utilization category	DC-22A
Rated operational current [Ie ] >DC 22-A [Ie]	800 A
Rated operational current [Ie ] >DC-21B [Ie]	1400 CSA
Overvoltage category/pollution degree	III/3
Rated insulation voltage [Ui ]	1250 V
Ambient temperature >Ambient temperature, storage	- 40 - + 70 °C
Ambient temperature >Operation	-25 - +70 °C
t = 0.1 s [Icw]	34 kA
Max. operating frequency	60 Ops/h
Lifespan, mechanical [Operations]	10000
Standard equipment	Lifespan, mechanical: of which max. 50 % trip by shunt/undervoltage release
Round copper conductor >Tunnel terminal >Stranded >Double hole	Screw connection
Round copper conductor >Tunnel terminal >Stranded >4-hole	1 x (50 - 240) 2 x (50 - 240) mm2
Round copper conductor >Bolt terminals >Direct on the switch >Stranded	4 x (50 - 240) mm2
Round copper conductor >Bolt terminals >Module plate >Single hole [min.]	1 x (120 - 185) 4 x (50 - 185) mm2
Round copper conductor >Bolt terminals >Module plate >Single hole [max.]	1 x (120 - 300) mm2
Round copper conductor >Bolt terminals >Module plate >Double hole [min.]	2 x (95 - 300) mm2
Round copper conductor >Bolt terminals >Module plate >Double hole [max.]	2 x (95 - 185) mm2
Round copper conductor >Bolt terminals >Connection width extension >Connection width extension	4 x (35 - 185) mm2
Al conductors, Cu cable >Tunnel terminal >Stranded >Double hole	4 x 300 6 x (95 - 240) mm2
Al conductors, Cu cable >Tunnel terminal >Stranded >4-hole	1 x (50 - 240) 2 x (50 - 240) mm2
Al conductors, Cu cable >Bolt terminal and rear-side connection >Flat copper strip, with holes [min.]	4 x (25 - 240) mm2
Al conductors, Cu cable >Bolt terminal and rear-side connection >Flat copper strip, with holes [max.]	(2x) 10 x 50 x 1.0 mm
Al conductors, Cu cable >Bolt terminal and rear-side connection >Connection width extension	(2x) 10 x 50 x 1.0 mm
Cu strip (number of segments x width x segment thickness) >Flat conductor terminal [min.]	(2x) 10 x 80 x 1,0 mm
Cu strip (number of segments x width x segment thickness) >Flat conductor terminal [max.]	6 x 16 x 0.8 mm
Cu strip (number of segments x width x segment thickness) >Module plate >Single hole	(2x) 10 x 32 x 1.0 mm
Cu strip (number of segments x width x segment thickness) >Bolt terminal and rear-side connection >Flat copper strip, with holes [min.]	(2x) 10 x 50 x 1,0 mm
Cu strip (number of segments x width x segment thickness) >Bolt terminal and rear-side connection >Flat copper strip, with holes [max.]	(2x) 10 x 50 x 1.0 mm
Cu strip (number of segments x width x segment thickness) >Bolt terminal and rear-side connection >Connection width extension	(2x) 10 x 50 x 1.0 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Screw connection	(2x) 10 x 80 x 1,0 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Direct on the switch [min.]	M10
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Direct on the switch [max.]	25 x 5 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Module plate >Single hole [min.]	2 x (50 x 10) 2 x (80 x 10) mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Module plate >Single hole [max.]	25 x 5 mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Module plate >Double hole	2 x (50 x 10) mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Connection width extension >Connection width extension [min.]	2 x (50 x 10) mm
Copper busbar (width x thickness) [mm] >Bolt terminal and rear-side connection >Connection width extension >Connection width extension [max.]	60 x 10 mm
Rated operational current for specified heat dissipation [In]	2 x (10 x 80) mm
Equipment heat dissipation, current-dependent [Pvid]	800 A
Operating ambient temperature min.	95 W
Operating ambient temperature max.	-25 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	+70 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Version as main switch	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Version as maintenance-/service switch	Yes
Version as safety switch	Yes
Version as emergency stop installation	No
Version as reversing switch	Yes
Number of switches	No
Max. rated operation voltage Ue AC	1
Rated operating voltage	0 V
Rated permanent current Iu	1000 - 1000 V
Rated permanent current at AC-23, 400 V	800 A
Rated permanent current at AC-21, 400 V	0 A
Rated operation power at AC-3, 400 V	0 A
Rated short-time withstand current lcw	0 kW
Rated operation power at AC-23, 400 V	34 kA
Switching power at 400 V	0 kW
Conditioned rated short-circuit current Iq	0 kW
Number of poles	0 kA
Number of auxiliary contacts as normally closed contact	4
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	0
Motor drive optional	0
Motor drive integrated	Yes
Voltage release optional	No
Device construction	Yes
Suitable for ground mounting	Built-in device fixed built-in technique
Suitable for front mounting 4-hole	Yes
Suitable for front mounting centre	No
Suitable for distribution board installation	No
Suitable for intermediate mounting	Yes
Colour control element	Yes
Type of control element	Black
Interlockable	Rocker lever
Type of electrical connection of main circuit	Yes
Degree of protection (IP), front side	Screw connection
Degree of protection (NEMA)	IP20

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.