MSC-DE-4-M17-SP(220V50HZ,240V60HZ)
167807 MSC-DE-4-M17-SP(220V50HZ,240V60HZ)
167807

DOL yolverici, Ir= 1 - 4 A, 220 V 50 Hz, 240 V 60 Hz, AC voltajı
DOL starter, Temel cihaz: MSC, Aşırı yük bobinlerinin ayar aralığı: Ir= 1 - 4 A, Çalıştırma gerilimi: 220 V 50 Hz, 240 V 60 Hz, AC gerilimi, Standartlar: IEC/EN 60947-4-1, VDE 0660 UL, CSA

Basic function	Type E DOL starters (complete devices)
Basic device	MSC
Connection technique	Screw terminals
Components for	North America
Connection to SmartWire-DT	no
AC HP = PS >200 V 208 V
AC HP = PS >230 V 240 V	0.75 HP
AC HP = PS >460 V 480 V	0.75 HP
240 V	2 HP
480 Y 277 V
Setting range of overload releases [Ir]	18 kA
Contact sequence	18 kA
Actuating voltage
Motor-protective circuit-breakers	1 - 4 A
Contactor
DOL starter wiring set Mechanical connection element and electrical electric contact module	220 V 50 Hz 240 V 60 Hz
Extension terminal	AC voltage
Notes	PKE12/XTU-4 Type
Standards	DILM17-10(...) Part no.
Mounting position	PKZM0-XDM32 Type
Altitude	BK25/3-PKZ0-E
Ambient temperature	The DOL starter type E (complete devices) consists of a PKE motor-protective circuit-breaker with AK-PKZ0, a DILM contactor and an extension terminal BK25/3-PKZ0-E. Motor-protective circuit-breaker and contactor mounted on top hat rail adapter plate. The connection of the main circuit between PKE and contactor is established with electrical contact modules.
Rated impulse withstand voltage [Uimp]
Overvoltage category/pollution degree	IEC/EN 60947-4-1, VDE 0660, UL, CSA
Rated operational voltage [Ue]
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	Max. 2000 m
AC-4 cycle operation >Minimum current flow times	-25 - +55
AC-4 cycle operation >Minimum cut-out periods
AC-4 cycle operation >Note	6000 V AC
Motor protective circuit breaker PKZM0, PKE	III/3
DILM contactors >Current heat loss >Current heat loss at Ie to AC-3/400 V	208 - 600 V
DILM contactors >Power consumption of the coil in a cold state and 1.0 x US >Dual-voltage coil 50 Hz [Sealing]	4 A
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	500 ms
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms
Auxiliary contacts >Pilot Duty >AC operated
Auxiliary contacts >Pilot Duty >DC operated	PKE motor-protective circuit-breaker, see motor-protective circuit-breaker product group DILM contactors, see contactor product group
Auxiliary contacts >General Use >AC	1.5 W
Auxiliary contacts >General Use >AC	2.1 W
Auxiliary contacts >General Use >DC
Auxiliary contacts >General Use >DC	0.75 HP
Short Circuit Current Rating, type E >240 V	0.75 HP
Short Circuit Current Rating, type E >480 Y / 277 V	2 HP
Rated operational current for specified heat dissipation [In]	A600
Heat dissipation per pole, current-dependent [Pvid]	P300
Equipment heat dissipation, current-dependent [Pvid]	600 V
Static heat dissipation, non-current-dependent [Pvs]	15 A
Heat dissipation capacity [Pdiss]	250 V
Operating ambient temperature min.	1 A
Operating ambient temperature max.	18 kA
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	18 kA
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	4 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0.5 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	1.5 W
10.2 Strength of materials and parts >10.2.5 Lifting	2.1 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-25 °C
10.3 Degree of protection of ASSEMBLIES	+55 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Kind of motor starter	Does not apply, since the entire switchgear needs to be evaluated.
With short-circuit release	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 50HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation power at AC-3, 230 V, 3-phase	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated power, 460 V, 60 Hz, 3-phase	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated power, 575 V, 60 Hz, 3-phase	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operation current Ie
Rated operation current at AC-3, 400 V
Overload release current setting	Direct starter
Rated conditional short-circuit current, type 1, 480 Y/277 V	Yes
Rated conditional short-circuit current, type 1, 600 Y/347 V	220 - 220 V
Rated conditional short-circuit current, type 2, 230 V	240 - 240 V
Rated conditional short-circuit current, type 2, 400 V	0 - 0 V
Number of auxiliary contacts as normally open contact	AC
Number of auxiliary contacts as normally closed contact	0.75 kW
Ambient temperature, upper operating limit	7.5 kW
Temperature compensated overload protection	1.47 kW
Release class	0 kW
Type of electrical connection of main circuit	12 A
Type of electrical connection for auxiliary- and control current circuit	4 A
Rail mounting possible	1 - 4 A
With transformer	0 A
Number of command positions	0 A
Suitable for emergency stop	0 A
Coordination class according to IEC 60947-4-3	0 A
Number of indicator lights	1
External reset possible	0
With fuse	60 °C
Degree of protection (IP)	Yes
Degree of protection (NEMA)	Adjustable
Supporting protocol for TCP/IP	Screw connection
Supporting protocol for PROFIBUS	Screw connection
Supporting protocol for CAN	Yes
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	0
Supporting protocol for MODBUS	No
Supporting protocol for Data-Highway	Class 2
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	IP20
Supporting protocol for PROFINET CBA	Other
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Width	No
Height	No
Depth	No
Product Standards	No
UL File No.	No
UL Category Control No.	No
CSA File No.	No
CSA Class No.	No
North America Certification	No
Specially designed for North America	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.