MSC-D-16-M15(24VDC)/BBA
102975 MSC-D-16-M15(24VDC)/BBA
102975

DOL marş motoru, 380 V 400 V 415 V: 7,5 kW, Ir= 10 - 16 A, 24 V DC, DC voltajı
DOL yolverici, Temel cihaz: MSC, Notlar: IE3 verimlilik sınıfına sahip motorlar için uygun değildir, Motor değerleri Motor gücü AC-3 380 V 400 V 415 V: P= 7,5 kW, Aşırı yük bobinlerinin ayar aralığı: Ir= 10 - 16 A, Koordinasyon: Koordinasyon tipi “1”, Çalıştırma gerilimi: 24 V DC, DC gerilimi, Standartlar: UL 508 (talep üzerine), CSA C 22.2 No. 14 (talep üzerine)

Basic function	DOL starters (complete devices)
Basic device	MSC
Notes	Not suitable for motors with efficiency class IE3.
Connection to SmartWire-DT	no
Motor rating [P] >AC-3 >380 V 400 V 415 V [P]	7.5 kW
Rated operational current >AC-3 >380 V 400 V 415 V [Ie]	15.2 A
Rated short-circuit current 380 - 415 V [Iq ]	50 kA
Setting range of overload releases [Ir]	10 - 16 A
Coordination	Type of coordination “1”
Contact sequence
Actuating voltage	24 V DC
Motor-protective circuit-breakers	DC voltage
Contactor	PKZM0-16 Type
DOL starter wiring set Mechanical connection element and electrical electric contact module	DILM15-10(…) Part no.
Notes	PKZM0-XDM12 Type
Standards	The DOL starters (complete units) consist of a PKZM0 motor protective circuit breaker and a DILM contactor. These combinations are mounted on the busbar adapters. The connection of the main circuit between the motor protective circuit breaker and the contactor is established with an electrical contact module. Cannot be combined with NHI-E-…-PKZ0-C standard auxiliary contact with spring-cage terminal. Further information Page Technical data PKZM0 ￫ PKZM0 Accessories PKZ ￫ 072896 Technical data DILM ￫ DILM Accessories DILM ￫ 281199
Rated impulse withstand voltage [Uimp]	UL 508 (on request) CSA C 22.2 No. 14 (on request)
Overvoltage category/pollution degree	6000 V AC
Rated operational voltage [Ue]	III/3
Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	230 - 415 V
Motor protective circuit breaker PKZM0, PKE	15 A
DC operated [Sealing]	PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group
Auxiliary contacts >Pilot Duty >AC operated	4.5 W
Auxiliary contacts >Pilot Duty >DC operated	A600
Auxiliary contacts >General Use >AC	P300
Auxiliary contacts >General Use >AC	600 V
Auxiliary contacts >General Use >DC	15 A
Auxiliary contacts >General Use >DC	250 V
Rated operational current for specified heat dissipation [In]	1 A
Heat dissipation per pole, current-dependent [Pvid]	15.5 A
Equipment heat dissipation, current-dependent [Pvid]	4.3 W
Static heat dissipation, non-current-dependent [Pvs]	12.9 W
Heat dissipation capacity [Pdiss]	2.6 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	-25 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	+55 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Kind of motor starter	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
With short-circuit release	Direct starter
Rated control supply voltage Us at AC 50HZ	Yes
Rated control supply voltage Us at AC 60HZ	0 - 0 V
Rated control supply voltage Us at DC	0 - 0 V
Voltage type for actuating	24 - 24 V
Rated operation power at AC-3, 230 V, 3-phase	DC
Rated operation power at AC-3, 400 V	4 kW
Rated power, 460 V, 60 Hz, 3-phase	7.5 kW
Rated power, 575 V, 60 Hz, 3-phase	0 kW
Rated operation current Ie	0 kW
Rated operation current at AC-3, 400 V	15.2 A
Overload release current setting	15 A
Rated conditional short-circuit current, type 1, 480 Y/277 V	10 - 16 A
Rated conditional short-circuit current, type 1, 600 Y/347 V	0 A
Rated conditional short-circuit current, type 2, 230 V	0 A
Rated conditional short-circuit current, type 2, 400 V	0 A
Number of auxiliary contacts as normally open contact	0 A
Number of auxiliary contacts as normally closed contact	1
Ambient temperature, upper operating limit	0
Temperature compensated overload protection	60 °C
Release class	Yes
Type of electrical connection of main circuit	CLASS 10
Type of electrical connection for auxiliary- and control current circuit	Screw connection
Rail mounting possible	Screw connection
With transformer	Yes
Number of command positions	No
Suitable for emergency stop	0
Coordination class according to IEC 60947-4-3	No
Number of indicator lights	Class 1
External reset possible	0
With fuse	No
Degree of protection (IP)	No
Degree of protection (NEMA)	IP20
Supporting protocol for TCP/IP	Other
Supporting protocol for PROFIBUS	No
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for MODBUS	No
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Width	No
Height	45 mm
Depth	200 mm
Product Standards	154 mm
UL File No.	UL60947-4-1A; CSA-C22.2 No. 14-10; IEC60947-4-1; CE marking
UL Category Control No.	E123500
CSA File No.	NKJH
CSA Class No.	12528
North America Certification	3211-04
Specially designed for North America	UL listed, CSA certified

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.